cpIwfIsdnBriPortChannelIdB1

CPIWF-R-MIB · .1.3.6.1.4.1.164.20.5.1.4.1.4

MIB view Table view

Object

column r/w Integer32

The CID of the AAL2 connection transporting the B1 channel of this  
ISDN BRI port over the AAL2 VCC.
	  When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP,
	  this object should not be use for CID allocation and the value of 
	  this object is not applicable. In addition, if an SNMP operation 
	  is attmpted on this object, an SNMP response with error status of
	  badValue (3) should be returned.

Context

MIB: CPIWF-R-MIB
OID: .1.3.6.1.4.1.164.20.5.1.4.1.4
Type: column
Access: readwrite
Status: current
Parent: cpIwfIsdnBriPortEntry
Table: cpIwfIsdnBriPortTable
Siblings: 15

Syntax

Integer32

Values & Constraints

Object Constraints

range: 16-255

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cpIwfIsdnBriPortNumber The ISDN BRI port number.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.20.5.1.4.1.1`
cpIwfIsdnBriPortL1Status This object indicates the current state of Layer 1 of the ISDN port, according to definitions in ITU-T Recommendation I-430 11/95, paragraph 6.2	column	Enumeration	`.1.3.6.1.4.1.164.20.5.1.4.1.10`
cpIwfIsdnBriPortDChRxPCMStatus This object indicates the state of the D Rx channel of the selected port	column	Enumeration	`.1.3.6.1.4.1.164.20.5.1.4.1.11`
cpIwfIsdnBriPortB1ChRxPCMStatus This object indicates the state of the B1 Rx channel of the selected port	column	Enumeration	`.1.3.6.1.4.1.164.20.5.1.4.1.12`
cpIwfIsdnBriPortB2ChRxPCMStatus This object indicates the state of the B2 Rx channel of the selected port	column	Enumeration	`.1.3.6.1.4.1.164.20.5.1.4.1.13`
cpIwfIsdnBriPortDChTxPCMStatus This object indicates the state of the D Tx channel of the selected port	column	Enumeration	`.1.3.6.1.4.1.164.20.5.1.4.1.14`
cpIwfIsdnBriPortB1ChTxPCMStatus This object indicates the state of the B1 Tx channel of the selected port	column	Enumeration	`.1.3.6.1.4.1.164.20.5.1.4.1.15`
cpIwfIsdnBriPortB2ChTxPCMStatus This object indicates the state of the B2 Tx channel of the selected port	column	Enumeration	`.1.3.6.1.4.1.164.20.5.1.4.1.16`
cpIwfIsdnBriPortPhysicalPort This has the value of the ifIndex of the ifEntry of the physical ISDN BRI port to which this CP-IWF ISDN BRI port is connected. The value of (0) has the special meaning that this …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.20.5.1.4.1.2`
cpIwfIsdnBriPortChannelIdD The CID of the AAL2 connection transporting the D channel of this ISDN BRI port over the AAL2 VCC. When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP, …	column	Integer32	`.1.3.6.1.4.1.164.20.5.1.4.1.3`
cpIwfIsdnBriPortChannelIdB2 The CID of the AAL2 connection transporting the B2 channel of this ISDN BRI port over the AAL2 VCC. When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP, …	column	Integer32	`.1.3.6.1.4.1.164.20.5.1.4.1.5`
cpIwfIsdnBriPortRxBytesPerCell Selects the maximum number of payload bytes to be excepted in a cell in the receive direction. the available range is 10 to 44 Default value 44	column	Integer32	`.1.3.6.1.4.1.164.20.5.1.4.1.6`
cpIwfIsdnBriPortTxBytesPerCell In AAL2, the maximum number of payload bytes that can be inserted in one cell is 44. Padding bytes can be inserted to fill the cell and transmit it immediately. Default value …	column	Integer32	`.1.3.6.1.4.1.164.20.5.1.4.1.7`
cpIwfIsdnBriPortContCheck Specifies the initial method used for a new connection to perform checks in the ATM network interface. The available selections are: off-two-way, on-source, on-sink, on-two-way, …	column	Enumeration	`.1.3.6.1.4.1.164.20.5.1.4.1.8`
cpIwfIsdnBriPortEchoCanceler Echo Cancellation activation Default value = b1-On-B2-On	column	Enumeration	`.1.3.6.1.4.1.164.20.5.1.4.1.9`