sysLogFacility

CPI-UNIFIED-MIB · .1.3.6.1.4.1.30932.1.10.1.1.3.24
MIB view Table view

Object

scalar r/w Enumeration 
Get or set the facility to use with the syslog. The facility argument is used to specify what type of program is logging the message.

Context

MIB
CPI-UNIFIED-MIB
OID
.1.3.6.1.4.1.30932.1.10.1.1.3.24
Type
scalar
Access
readwrite
Status
current
Parent
logging
Siblings
25

Syntax

Enumeration

Values & Constraints

Enumerated Values
0loglocal0
1loglocal1
2loglocal2
3loglocal3
4loglocal4
5loglocal5
6loglocal
7loglocal7

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
logEnable
Controls whether the data logging feature is enabled.
scalarEnumeration.1.3.6.1.4.1.30932.1.10.1.1.3.1
usersetupdLog
Control whether logging of user setup change events is enabled.
scalarEnumeration.1.3.6.1.4.1.30932.1.10.1.1.3.10
fwupdatedLog
Control whether the logging of firmware updates is enabled.
scalarEnumeration.1.3.6.1.4.1.30932.1.10.1.1.3.11
setupchangedLog
Control whether the logging of setup change events is enabled.
scalarEnumeration.1.3.6.1.4.1.30932.1.10.1.1.3.12
recepchangedLog
Control whether logging of receptacle state changes is enabled.
scalarEnumeration.1.3.6.1.4.1.30932.1.10.1.1.3.13
pduopchangedLog
Control whether logging of PDU operation and state changes is enabled.
scalarEnumeration.1.3.6.1.4.1.30932.1.10.1.1.3.14
dLogCycle
Set or get the time interval in minutes for internal data logging to occur.
scalarInteger32.1.3.6.1.4.1.30932.1.10.1.1.3.15
dLogFullWarnLevel
Set or get the warning threshold for percentage of storage full (min=50, max=100).
scalarInteger32.1.3.6.1.4.1.30932.1.10.1.1.3.16
netdLogServer
Set or get the network address for the data server.
scalarOctetString.1.3.6.1.4.1.30932.1.10.1.1.3.17
netdLogPort
Set or get the port used by the data server.
scalarInteger32.1.3.6.1.4.1.30932.1.10.1.1.3.18
netdLogUser
Set or get the user name to access the data server.
scalarOctetString.1.3.6.1.4.1.30932.1.10.1.1.3.19
logInterval
Set or get the time interval in seconds for logging metrics (disabled if < 10).
scalarInteger32.1.3.6.1.4.1.30932.1.10.1.1.3.2
netdLogPasswd
Set or get the user password to access the data server.
scalarOctetString.1.3.6.1.4.1.30932.1.10.1.1.3.20
netdLogDestdir
Get or get the destination directory in the data server.
scalarOctetString.1.3.6.1.4.1.30932.1.10.1.1.3.21
netdLogOptions
Get or set the options string when accessing the data server.
scalarOctetString.1.3.6.1.4.1.30932.1.10.1.1.3.22
sysLogIdentity
Get or set the identity to use with the syslog. The identity is an arbitrary identification string which syslog will prefix to each message. This is intended to identify the sour…
scalarOctetString.1.3.6.1.4.1.30932.1.10.1.1.3.23
sysLogCentralServerAddr
Get or set the IP address for the central syslog server.
scalarOctetString.1.3.6.1.4.1.30932.1.10.1.1.3.25
sysLogCentralServerPort
Get or set the port for the central syslog server.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.30932.1.10.1.1.3.26
logDifference
Set or get the current difference in 1/100 Amps that triggers logging metrics.
scalarInteger32.1.3.6.1.4.1.30932.1.10.1.1.3.3
netservdLog
Controls sending the data logs to log server over network.
scalarEnumeration.1.3.6.1.4.1.30932.1.10.1.1.3.4
autonetLog
Controls whether automatic transfer to log server every 6 hours is enabled.
scalarEnumeration.1.3.6.1.4.1.30932.1.10.1.1.3.5
stdmeterdLog
Controls whether logging of branch, receptacle and environmental metrics is enabled.
scalarEnumeration.1.3.6.1.4.1.30932.1.10.1.1.3.6
groupmeterdLog
Controls whether logging of grouped receptacle metrics is enabled.
scalarEnumeration.1.3.6.1.4.1.30932.1.10.1.1.3.7
alarmdLog
Controls whether logging of alarm events is enabled.
scalarEnumeration.1.3.6.1.4.1.30932.1.10.1.1.3.8
userlogindLog
Control whether logging of user login events is enabled.
scalarEnumeration.1.3.6.1.4.1.30932.1.10.1.1.3.9