dLogCycle
CPI-UNIFIED-MIB ·
.1.3.6.1.4.1.30932.1.1.2.90
Object
scalar
r/w
Integer32
The time interval in minutes for internal data logging to occur.
Context
- MIB
- CPI-UNIFIED-MIB
- OID
.1.3.6.1.4.1.30932.1.1.2.90- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- configuration
- Siblings
- 89
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| logInterval Set or get the time interval in seconds for logging metrics (disabled if < 10). | scalar | Integer32 | .1.3.6.1.4.1.30932.1.10.1.1.3.2 |
| pduIPv6 Set or get the IPv6 address of the PDU. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.1.2.4 |
| lnkAttachCount Count of secondary PDUs that are attached to the link. | scalar | Integer32 | .1.3.6.1.4.1.30932.1.1.2.100 |
| netOptionsIPv6 | node | - | .1.3.6.1.4.1.30932.1.1.2.11 |
| subnetMaskIPv6 PDU IPV6 Subnet Mask. | scalar | Integer32 | .1.3.6.1.4.1.30932.1.1.2.12 |
| gatewayIPv6 PDU IPV6 Gateway Address. | scalar | OctetString | .1.3.6.1.4.1.30932.1.1.2.13 |
| dnsHostIPv6 | node | - | .1.3.6.1.4.1.30932.1.1.2.14 |
| snmpHostsIPv6 | node | - | .1.3.6.1.4.1.30932.1.1.2.15 |
| receptacleControl | node | - | .1.3.6.1.4.1.30932.1.1.2.16 |
| receptacleONdelay | node | - | .1.3.6.1.4.1.30932.1.1.2.17 |
| receptacleResetDelay | node | - | .1.3.6.1.4.1.30932.1.1.2.18 |
| maxCurrentLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.19 |
| alarmInterval Set or get the time interval in seconds for alarm cycle (disabled if < 10). | scalar | Integer32 | .1.3.6.1.4.1.30932.1.10.1.1.7.1 |
| minCurrentLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.20 |
| warnHiCurrentLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.21 |
| warnLoCurrentLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.22 |
| maxVoltageLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.24 |
| minVoltageLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.25 |
| warnHiVoltageLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.26 |
| warnLoVoltageLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.27 |
| receptacleMaxCurrent | node | - | .1.3.6.1.4.1.30932.1.1.2.28 |
| receptacleMinCurrent | node | - | .1.3.6.1.4.1.30932.1.1.2.29 |
| logDifference Set or get the current difference in 1/100 Amps that triggers logging metrics. | scalar | Integer32 | .1.3.6.1.4.1.30932.1.10.1.1.3.3 |
| receptacleWarnHiCurrent | node | - | .1.3.6.1.4.1.30932.1.1.2.30 |
| receptacleWarnLoCurrent | node | - | .1.3.6.1.4.1.30932.1.1.2.31 |
| maxTempLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.32 |
| minTempLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.33 |
| warnHiTempLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.34 |
| warnLoTempLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.35 |
| maxHumidityLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.36 |
| minHumidityLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.37 |
| warnHiHumidityLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.38 |
| warnLoHumidityLimits | node | - | .1.3.6.1.4.1.30932.1.1.2.39 |
| pduIP PDU IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.30932.1.1.2.4 |
| pduName PDU Name. | scalar | OctetString | .1.3.6.1.4.1.30932.1.1.2.40 |
| pduDescrip PDU Description. | scalar | OctetString | .1.3.6.1.4.1.30932.1.1.2.41 |
| receptacleNames | node | - | .1.3.6.1.4.1.30932.1.1.2.42 |
| receptacleDescrips | node | - | .1.3.6.1.4.1.30932.1.1.2.43 |
| netOptions | node | - | .1.3.6.1.4.1.30932.1.1.2.5 |
| groupNames | node | - | .1.3.6.1.4.1.30932.1.1.2.50 |
| groupMaps | node | - | .1.3.6.1.4.1.30932.1.1.2.51 |
| dispTimeout Set or get the inactivity timeout in minutes to blank the local display (minimum is 1 minute). | scalar | Integer32 | .1.3.6.1.4.1.30932.1.10.1.1.6.6 |
| loginTimeout Set or get the inactivity timeout in minutes to terminate a logged in session (minimum is 1 minute). | scalar | Integer32 | .1.3.6.1.4.1.30932.1.10.1.1.6.7 |
| dispBrightness Set or get the relative brightness of the local display (0 in min, 9 is max). | scalar | Integer32 | .1.3.6.1.4.1.30932.1.10.1.1.6.8 |
| pduOptions | node | - | .1.3.6.1.4.1.30932.1.1.2.58 |
| httpPorts | node | - | .1.3.6.1.4.1.30932.1.1.2.59 |
| subnetMask PDU Subnet Mask. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.30932.1.1.2.6 |
| sshPorts | node | - | .1.3.6.1.4.1.30932.1.1.2.60 |
| snmpPorts | node | - | .1.3.6.1.4.1.30932.1.1.2.61 |
| smtpPorts | node | - | .1.3.6.1.4.1.30932.1.1.2.62 |
| rfcTimeServer Set or get the IP address of the RFC Time Server. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.1.3.1 |
| ntpTimeServer Set or get the IP address of the NTP Time Server. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.1.3.2 |
| smtpServer Set or get the IP address of the e-mail server. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.2.3.4 |
| snmpReadComm Set or get the SNMP Read Community. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.2.1.5 |
| snmpWriteComm Set or get the SNMP Write Community. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.2.1.6 |
| snmpUSMuserName Set or get the SNMP USM User Name. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.2.1.7 |
| snmpSecurityLevelAlgorithm | node | - | .1.3.6.1.4.1.30932.1.1.2.69 |
| gateway PDU Gateway Address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.30932.1.1.2.7 |
| snmpAuthPasswd Set or Get the SNMP Authentication Password. | scalar | OctetString | .1.3.6.1.4.1.30932.1.10.1.1.2.1.11 |
| snmpPrivPasswd Set or get the SNMP Privacy Password. | scalar | OctetString | .1.3.6.1.4.1.30932.1.10.1.1.2.1.12 |
| snmpContextName Set or get the SNMP Context Name. | scalar | OctetString | .1.3.6.1.4.1.30932.1.10.1.1.2.1.13 |
| snmpEngineID Set or get the SNMP Engine ID. | scalar | OctetString | .1.3.6.1.4.1.30932.1.10.1.1.2.1.14 |
| snmpLocAuthKey Set or get the SNMP Local Authentication Key. | scalar | OctetString | .1.3.6.1.4.1.30932.1.10.1.1.2.1.15 |
| snmpLocPrivKey Set or get the SNMP Local Privacy Key. | scalar | OctetString | .1.3.6.1.4.1.30932.1.10.1.1.2.1.16 |
| smtpUserName Set or get the PDU e-mail user login name. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.2.3.5 |
| smtpUserPasswd Set or get the PDU e-mail user login password. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.2.3.6 |
| smtpEmailAddr Set or get the PDU e-mail address. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.2.3.7 |
| smtpEmailDestinations | node | - | .1.3.6.1.4.1.30932.1.1.2.79 |
| dnsHosts | node | - | .1.3.6.1.4.1.30932.1.1.2.8 |
| smtpServOptions deprecated This setting is now deprecated. Users should use the smtpenabletls and smtpstartls OID's instead. | scalar | Integer32 | .1.3.6.1.4.1.30932.1.10.1.1.2.3.11 |
| radiusServer Set or get the IP address of the Radius Authentication Server. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.4.2.2 |
| radiusSHSecret Set or get the Radius Shared Secret. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.4.2.3 |
| radiusNASServer Set or get the Radius Network Access Service. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.4.2.4 |
| radiusNASPorts | node | - | .1.3.6.1.4.1.30932.1.1.2.84 |
| adServer Set or get the IP address of the Active Directory Server. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.4.1.2 |
| adDomain Set or get the Active Directory Domain. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30932.1.10.1.1.4.1.3 |
| adAllPorts | node | - | .1.3.6.1.4.1.30932.1.1.2.87 |
| envProbeNames | node | - | .1.3.6.1.4.1.30932.1.1.2.88 |
| dLogOptions | node | - | .1.3.6.1.4.1.30932.1.1.2.89 |
| snmpHosts | node | - | .1.3.6.1.4.1.30932.1.10.1.1.2.1.2 |
| dLogFullWarnLevel Set or get the warning threshold for percentage of storage full (min=50, max=100). | scalar | Integer32 | .1.3.6.1.4.1.30932.1.10.1.1.3.16 |
| netdLogServer Set or get the network address for the data server. | scalar | OctetString | .1.3.6.1.4.1.30932.1.10.1.1.3.17 |
| netdLogPort Set or get the port used by the data server. | scalar | Integer32 | .1.3.6.1.4.1.30932.1.10.1.1.3.18 |
| netdLogUser Set or get the user name to access the data server. | scalar | OctetString | .1.3.6.1.4.1.30932.1.10.1.1.3.19 |
| netdLogPasswd Set or get the user password to access the data server. | scalar | OctetString | .1.3.6.1.4.1.30932.1.10.1.1.3.20 |
| netdLogDestdir Get or get the destination directory in the data server. | scalar | OctetString | .1.3.6.1.4.1.30932.1.10.1.1.3.21 |
| netdLogOptions Get or set the options string when accessing the data server. | scalar | OctetString | .1.3.6.1.4.1.30932.1.10.1.1.3.22 |
| snmpTrapHosts | node | - | .1.3.6.1.4.1.30932.1.10.1.1.2.1.17 |
| snmpTrapHostsIPv6 | node | - | .1.3.6.1.4.1.30932.1.1.2.99 |