pduUnitConfigUpperWarningThreshold
CPDU-MIB ·
.1.3.6.1.4.1.318.1.1.32.2.2.1.11
Object
column
mandatory
r/w
Unsigned32
User-defined upper non-critical (warning) unit active power alarm threshold measured in Watts
Context
- MIB
- CPDU-MIB
- OID
.1.3.6.1.4.1.318.1.1.32.2.2.1.11- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- pduUnitConfigEntry
- Table
- pduUnitConfigTable
- Siblings
- 19
Syntax
Unsigned32
- Source
- CISCO-ATM-SWITCH-CUG-MIBUnsigned32
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pduUnitConfigIndex mandatory The index of the PDU Unit Config Entry | column | Integer32 | .1.3.6.1.4.1.318.1.1.32.2.2.1.1 |
| pduUnitConfigUpperCriticalThreshold mandatory User-defined upper critical unit active power alarm threshold measured in Watts | column | Unsigned32 | .1.3.6.1.4.1.318.1.1.32.2.2.1.10 |
| pduUnitConfigAlarmResetThreshold mandatory The hysteresis used for deassertions in Watts | column | Unsigned32 | .1.3.6.1.4.1.318.1.1.32.2.2.1.12 |
| pduUnitConfigAlarmStateChangeDelay mandatory The delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion … | column | Unsigned32 | .1.3.6.1.4.1.318.1.1.32.2.2.1.13 |
| pduUnitConfigEnabledThresholds mandatory A bit string indicating which alarm thresholds are enabled | column | Bits | .1.3.6.1.4.1.318.1.1.32.2.2.1.14 |
| pduUnitConfigPeakPowerReset mandatory Setting this OID to reset (2) will cause the existing peak power value
to be replaced by the current load power value. Getting this OID will
do nothing and return the noOperatio… | column | Enumeration | .1.3.6.1.4.1.318.1.1.32.2.2.1.15 |
| pduUnitConfigEnergyReset mandatory Setting this OID to reset (2) will cause the device energy meter value
to be reset to zero. Getting this OID in models that support this
feature will do nothing and return the n… | column | Enumeration | .1.3.6.1.4.1.318.1.1.32.2.2.1.16 |
| pduUnitConfigOutletPeakPowerReset mandatory Setting this OID to reset (2) will cause the outlet peak power meter value
to be reset to zero. Getting this OID in models that support this
feature will do nothing and return t… | column | Enumeration | .1.3.6.1.4.1.318.1.1.32.2.2.1.17 |
| pduUnitConfigOutletEnergyReset mandatory Setting this OID to reset (2) will cause the outlet energy meter value
to be reset to zero. Getting this OID in models that support this
feature will do nothing and return the n… | column | Enumeration | .1.3.6.1.4.1.318.1.1.32.2.2.1.18 |
| pduUnitConfigSsh mandatory Setting this OID to off(0) will disable the SSH connection. Setting this OID to on(1) will enable the SSH connection. | column | Enumeration | .1.3.6.1.4.1.318.1.1.32.2.2.1.19 |
| pduUnitConfigName mandatory A user-defined string identifying the PDU | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.32.2.2.1.2 |
| pduUnitConfigResetNetworkManagementCard mandatory Getting this OID will return noOperation(0). Setting this OID to reset(1) will reset NMC. | column | Enumeration | .1.3.6.1.4.1.318.1.1.32.2.2.1.20 |
| pduUnitConfigLocation mandatory A user-defined string identifying the location of the PDU | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.32.2.2.1.3 |
| pduUnitConfigDisplayOrientation mandatory Indicates the intended physical orientation of the oLED display
displayNormal (1) indicates normal orientation.
displayReverse (2) indicates upside down orientation
NOTE:
This OI… | column | Enumeration | .1.3.6.1.4.1.318.1.1.32.2.2.1.4 |
| pduUnitConfigOledDisplayControl mandatory Used to turn oled display On or Off
displayOff (1) to turn dispaly OFF.
displayOn (2) to turn dispaly ON | column | Enumeration | .1.3.6.1.4.1.318.1.1.32.2.2.1.5 |
| pduUnitConfigColdstartDelay mandatory The amount of time, specified in seconds, between when power
is provided to the PDU and when the PDU start providing basic master
power to the outlets | column | Unsigned32 | .1.3.6.1.4.1.318.1.1.32.2.2.1.6 |
| pduUnitConfigGlobalOutletStateOnStartup mandatory The outlet state on device startup; applies to all outlets
unless overridden at the outlet level | column | Enumeration | .1.3.6.1.4.1.318.1.1.32.2.2.1.7 |
| pduUnitConfigLowerCriticalThreshold mandatory User-defined lower critical unit active power alarm threshold measured in Watts | column | Unsigned32 | .1.3.6.1.4.1.318.1.1.32.2.2.1.8 |
| pduUnitConfigLowerWarningThreshold mandatory User-defined lower non-critical (warning) unit active power alarm threshold measured in Watts | column | Unsigned32 | .1.3.6.1.4.1.318.1.1.32.2.2.1.9 |