pduInputPhaseConfigCurrentAlarmStateChangeDelay

CPDU-MIB · .1.3.6.1.4.1.318.1.1.32.3.2.1.13
MIB view Table view

Object

column mandatory r/w Integer32 
The delay measured in samples before a current state is asserted. If the 
value is zero, then the state is asserted as soon as it is 
detected; if it is non-zero, say n, then the assertion condition 
must exist for n+1 consecutive samples before the corresponding 
assertion event is reported.

Context

MIB
CPDU-MIB
OID
.1.3.6.1.4.1.318.1.1.32.3.2.1.13
Type
column
Access
readwrite
Status
mandatory
Parent
pduInputPhaseConfigEntry
Table
pduInputPhaseConfigTable
Siblings
16

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pduInputPhaseConfigIndex mandatory
The index of the PDU Input Phase configuration table entry
columnInteger32.1.3.6.1.4.1.318.1.1.32.3.2.1.1
pduInputPhaseConfigVoltageUpperCriticalThreshold mandatory
User-defined upper critical input phase voltage alarm threshold in Volts(V).
columnUnsigned32.1.3.6.1.4.1.318.1.1.32.3.2.1.10
pduInputPhaseConfigVoltageUpperWarningThreshold mandatory
User-defined upper non-critical (warning) input phase voltage alarm threshold in Volts(V).
columnUnsigned32.1.3.6.1.4.1.318.1.1.32.3.2.1.11
pduInputPhaseConfigCurrentAlarmResetThreshold mandatory
The hysteresis used for current alarm deassertions in hundredths of Amps(A).
columnUnsigned32.1.3.6.1.4.1.318.1.1.32.3.2.1.12
pduInputPhaseConfigCurrentEnabledThresholds mandatory
A bit string indicating which current alarm thresholds are enabled.
columnBits.1.3.6.1.4.1.318.1.1.32.3.2.1.14
pduInputPhaseConfigVoltageAlarmResetThreshold mandatory
The hysteresis used for voltage alarm deassertions in Volts(V).
columnUnsigned32.1.3.6.1.4.1.318.1.1.32.3.2.1.15
pduInputPhaseConfigVoltageAlarmStateChangeDelay mandatory
The delay measured in samples before a voltage state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the …
columnInteger32.1.3.6.1.4.1.318.1.1.32.3.2.1.16
pduInputPhaseConfigVoltageEnabledThresholds mandatory
A bit string indicating which voltage alarm thresholds are enabled.
columnBits.1.3.6.1.4.1.318.1.1.32.3.2.1.17
pduInputPhaseConfigCount mandatory
The total number of Input Phases
columnInteger32.1.3.6.1.4.1.318.1.1.32.3.2.1.2
pduInputPhaseConfigOverloadRestriction mandatory
This OID controls the behavior of a Switched PDU Input Phase when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alw…
columnEnumeration.1.3.6.1.4.1.318.1.1.32.3.2.1.3
pduInputPhaseConfigCurrentLowerCriticalThreshold mandatory
User-defined lower critical input phase current alarm threshold in hundredths of Amps(A).
columnUnsigned32.1.3.6.1.4.1.318.1.1.32.3.2.1.4
pduInputPhaseConfigCurrentLowerWarningThreshold mandatory
User-defined lower non-critical (warning) input phase current alarm threshold in hundredths of Amps(A).
columnUnsigned32.1.3.6.1.4.1.318.1.1.32.3.2.1.5
pduInputPhaseConfigCurrentUpperCriticalThreshold mandatory
User-defined upper critical input phase current alarm threshold in hundredths of Amps(A).
columnUnsigned32.1.3.6.1.4.1.318.1.1.32.3.2.1.6
pduInputPhaseConfigCurrentUpperWarningThreshold mandatory
User-defined upper non-critical (warning) input phase current alarm threshold in hundredths of Amps(A).
columnUnsigned32.1.3.6.1.4.1.318.1.1.32.3.2.1.7
pduInputPhaseConfigVoltageLowerCriticalThreshold mandatory
User-defined lower critical input phase voltage alarm threshold in Volts(V).
columnUnsigned32.1.3.6.1.4.1.318.1.1.32.3.2.1.8
pduInputPhaseConfigVoltageLowerWarningThreshold mandatory
User-defined lower non-critical (warning) input phase voltage alarm threshold in Volts(V).
columnUnsigned32.1.3.6.1.4.1.318.1.1.32.3.2.1.9