fullAccessStatus

CMM3-MIB · .1.3.6.1.4.1.161.19.3.4.3.16
MIB view Table view

Object

scalar obsolete SNMPv2-TCDisplayString 
Full access password status.

Context

MIB
CMM3-MIB
OID
.1.3.6.1.4.1.161.19.3.4.3.16
Type
scalar
Access
readonly
Status
obsolete
Parent
cmmConfig
Siblings
97

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
gpsTimingPulse
(1) -- Master. (0) -- Slave.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.1
port6PowerCtr
Power control for port 6. (1) -- Power on. (0) -- Power off
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.10
port7PowerCtr
Power control for port 7. (1) -- Power on. (0) -- Power off
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.11
port8PowerCtr
Power control for port 8. (1) -- Power on. (0) -- Power off
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.12
displayOnlyAccess obsolete
Display only access to web interface and telnet.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.13
fullAccess obsolete
Full access password to web interface and telnet.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.14
displayOnlyStatus obsolete
Display only password status.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.15
webAutoUpdate
Web page auto update in seconds. 0 means disabled.
scalarSeconds Integer32.1.3.6.1.4.1.161.19.3.4.3.17
port1Config
Link speed configuration on port 1.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.18
port2Config
Link speed configuration on port 2.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.19
lan1Ip
LAN 1 IP.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.2
port3Config
Link speed configuration on port 3.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.20
port4Config
Link speed configuration on port 4.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.21
port5Config
Link speed configuration on port 5.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.22
port6Config
Link speed configuration on port 6.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.23
port7Config
Link speed configuration on port 7.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.24
port8Config
Link speed configuration on port 8.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.25
port1Description
Port 1 text description.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.26
port2Description
Port 2 text description.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.27
port3Description
Port 3 text description.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.28
port4Description
Port 4 text description.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.29
lan1SubnetMask
LAN 1 subnet mask.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.3
port5Description
Port 5 text description.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.30
port6Description
Port 6 text description.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.31
port7Description
Port 7 text description.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.32
port8Description
Port 8 text description.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.33
snmpTrap1
SNMP Trap Address 1.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.34
snmpTrap2
SNMP Trap Address 2.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.35
snmpTrap3
SNMP Trap Address 3.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.36
snmpTrap4
SNMP Trap Address 4.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.37
snmpTrap5
SNMP Trap Address 5.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.38
snmpTrap6
SNMP Trap Address 6.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.39
defaultGateway
Default gateway
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.4
snmpTrap7
SNMP Trap Address 7.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.40
snmpTrap8
SNMP Trap Address 8.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.41
snmpTrap9
SNMP Trap Address 9.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.42
snmpTrap10
SNMP Trap Address 10.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.43
vlanTagEnable
Enable/Disable 802.1Q VLAN tagging.P (1) -- Enable Tagging. (0) -- Disable Tagging.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.44
vlanTagId
802.1q VLAN Tag ID, 1-4094.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.45
port1Uplink
Configure Port 1 as Uplink Port. (1) -- Port 1 is an uplink port. (0) -- Port 1 is not an uplink port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.46
port2Uplink
Configure Port 2 as Uplink Port. (1) -- Port 2 is an uplink port. (0) -- Port 2 is not an uplink port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.47
port3Uplink
Configure Port 3 as Uplink Port. (1) -- Port 3 is an uplink port. (0) -- Port 3 is not an uplink port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.48
port4Uplink
Configure Port 4 as Uplink Port. (1) -- Port 4 is an uplink port. (0) -- Port 4 is not an uplink port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.49
port1PowerCtr
Power control for port 1. (1) -- Power on. (0) -- Power off
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.5
port5Uplink
Configure Port 5 as Uplink Port. (1) -- Port 5 is an uplink port. (0) -- Port 5 is not an uplink port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.50
port6Uplink
Configure Port 6 as Uplink Port. (1) -- Port 6 is an uplink port. (0) -- Port 6 is not an uplink port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.51
port7Uplink
Configure Port 7 as Uplink Port. (1) -- Port 7 is an uplink port. (0) -- Port 7 is not an uplink port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.52
port8Uplink
Configure Port 8 as Uplink Port. (1) -- Port 8 is an uplink port. (0) -- Port 8 is not an uplink port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.53
rebootIfRequired
Reboot CMM if required. (1) -- Check if CMM reboot is required and do so. (0) -- Do not check for reboot.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.54
port1VlanConf
Port 1 VLAN Port Configuration. Bitmap determines which Port(s) Port 1 will egress data. 0 means no ports, 2 means port 2, 6 means ports 2 and 3, etc.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.55
port2VlanConf
Port 2 VLAN Port Configuration. Bitmap determines which Port(s) Port 2 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.56
port3VlanConf
Port 3 VLAN Port Configuration. Bitmap determines which Port(s) Port 3 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.57
port4VlanConf
Port 4 VLAN Port Configuration. Bitmap determines which Port(s) Port 4 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.58
port5VlanConf
Port 5 VLAN Port Configuration. Bitmap determines which Port(s) Port 5 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.59
port2PowerCtr
Power control for port 2. (1) -- Power on. (0) -- Power off.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.6
port6VlanConf
Port 6 VLAN Port Configuration. Bitmap determines which Port(s) Port 6 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.60
port7VlanConf
Port 7 VLAN Port Configuration. Bitmap determines which Port(s) Port 7 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.61
port8VlanConf
Port 8 VLAN Port Configuration. Bitmap determines which Port(s) Port 8 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.62
port1PwrReset
If Port 1 is Powered, attched device will be reset when set to 1. If Port 1 is Not Powered, nothing will happen.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.63
port2PwrReset
If Port 2 is Powered, attched device will be reset when set to 1. If Port 2 is Not Powered, nothing will happen.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.64
port3PwrReset
If Port 3 is Powered, attched device will be reset when set to 1. If Port 3 is Not Powered, nothing will happen.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.65
port4PwrReset
If Port 4 is Powered, attched device will be reset when set to 1. If Port 4 is Not Powered, nothing will happen.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.66
port5PwrReset
If Port 5 is Powered, attched device will be reset when set to 1. If Port 5 is Not Powered, nothing will happen.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.67
port6PwrReset
If Port 6 is Powered, attched device will be reset when set to 1. If Port 6 is Not Powered, nothing will happen.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.68
port7PwrReset
If Port 7 is Powered, attched device will be reset when set to 1. If Port 7 is Not Powered, nothing will happen.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.69
port3PowerCtr
Power control for port 3. (1) -- Power on. (0) -- Power off
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.7
port8PwrReset
If Port 8 is Powered, attched device will be reset when set to 1. If Port 8 is Not Powered, nothing will happen.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.70
snmpReadOnly
SNMP Permissions 1 - Read Only 0 - Read/Write.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.71
snmpCommunityString
SNMP Community String
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.72
snmpAccessSubnet
SNMP Accessing Subnet 1. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.73
snmpAccessSubnet2
SNMP Accessing Subnet 2. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.74
snmpAccessSubnet3
SNMP Accessing Subnet 3. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.75
snmpAccessSubnet4
SNMP Accessing Subnet 4. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.76
snmpAccessSubnet5
SNMP Accessing Subnet 5. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.77
snmpAccessSubnet6
SNMP Accessing Subnet 6. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.78
snmpAccessSubnet7
SNMP Accessing Subnet 7. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.79
port4PowerCtr
Power control for port 4. (1) -- Power on. (0) -- Power off
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.8
snmpAccessSubnet8
SNMP Accessing Subnet 8. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.80
snmpAccessSubnet9
SNMP Accessing Subnet 9. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.81
snmpAccessSubnet10
SNMP Accessing Subnet 10. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.161.19.3.4.3.82
port1Management
Configure Port 1 as a Management Port. (1) -- Port 1 is a Management port. (0) -- Port 1 is not a Management port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.83
port2Management
Configure Port 2 as a Management Port. (1) -- Port 2 is a Managementport. (0) -- Port 2 is not a Management port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.84
port3Management
Configure Port 3 as a Management Port. (1) -- Port 3 is a Management port. (0) -- Port 3 is not a Management port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.85
port4Management
Configure Port 4 as a Management Port. (1) -- Port 4 is a Management port. (0) -- Port 4 is not a Management port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.86
port5Management
Configure Port 5 as a Management Port. (1) -- Port 5 is a Management port. (0) -- Port 5 is not a Management port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.87
port6Management
Configure Port 6 as a Management Port. (1) -- Port 6 is a Management port. (0) -- Port 6 is not a Management port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.88
port7Management
Configure Port 7 as a Management Port. (1) -- Port 7 is a Management port. (0) -- Port 7 is not a Management port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.89
port5PowerCtr
Power control for port 5. (1) -- Power on. (0) -- Power off
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.9
port8Management
Configure Port 8 as a Management Port. (1) -- Port 8 is a Management port. (0) -- Port 8 is not a Management port.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.90
sessionTimeout
Timer for Telnet, Web and FTP sessions.
scalarInteger32.1.3.6.1.4.1.161.19.3.4.3.91
siteInfoViewable
Enable non login users the ability to view Site Information
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.92
ipAccessFilterEnable
To enable or disable IP access filtering to Management functions. (0) - IP access will be allowed from all addresses. (1) - IP access will be controlled using allowedIPAccess1-3 e…
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.93
allowedIPAccess1
Allow access to CMM Management from this IP. 0 is default setting to allow from all IPs.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.94
allowedIPAccess2
Allow access to CMM Management from this IP. 0 is default setting to allow from all IPs.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.95
allowedIPAccess3
Allow access to CMM Management from this IP. 0 is default setting to allow from all IPs.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.161.19.3.4.3.96
verifyGPSChecksum
Enable/Disable verification of GPS message checksums.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.97
cmm3SnmpGPSSyncTrapEnable
Variable to enable/disable GPS sync/out-sync traps.
scalarEnumeration.1.3.6.1.4.1.161.19.3.4.3.98