CMM3-MIB Table View

A unique value for each CMM port. Its value starts from 1

The number of good packets received by a port that
were dropped due to lack of resources(e.g., lack of
input buffers)or were dropped due to lack of resources
before a determination of the validity of the packet was
…

The number of bytes of data received by a port
(excluding preamble but including FCS), including
bad packets.

The number of good packets received by a port that
are directed to the broadcast address. This counter
does not include error broadcast packets or valid
multicast packets.

The number of good packets received by a port that
are directed to the multicast address. This counter
does not include error multicast packets or valid
broadcast packets.

The number of times the SA of good receive packets
has changed from the previous value. A count greater
than 1 generally indicates the port if connected to
a repeater based network.

The number of good packets received by a port that are
less than 64 bytes long (excluding framing bits but
including the FCS).

The number of good packets received by a port that are
greater than 1522 bytes inclusive (excluding framing bits
but including the FCS). Note that this counter alone will
be incremented for packets in the range 1523-15…

The number of packets received by a port that are less than
64 bytes(excluding framing bits) and have either an FCS error
or an alignment error

The number of packets received by a port that are longer
than 1522 bytes and have either an FCS error or an alignment
error.

The number of good packets received by a port that are
addressed to a unicast address.

The number of packets received by a port that have a
length (excluding framing bits but including FCS)
between 64 and 1522 bytes, inclusive, and have a bad
FCS with a non-integral number of bytes.

The number of packets received by a port that have a
length (excluding framing bits but including FCS)
between 64 and 152 bytes, and have a bad FCS with an
integral number of bytes.

The total number of bytes in all good packets received
by a port (excluding framing bits but including FCS).

The number of good packets received by a port that
are greater than 1536 bytes (excluding framing bits
but including FCS) and were discarded due to excessive
length. Note that the RxOversizePkts counter alone is
increm…

The number of PAUSE frame received by a port. The PAUSE
frame must have a valid MAC Control Frame EtherType field
(88-08h), have a destination MAC address of either the MAC
Control frame reserved multicast address(01-80…

The total number of times a valid length packet was received
at a port and at least one invalid data symbol was detected.
Counter only increment once per carrier event and does not
increment on detection of collision du…

The total number of good bytes of data transmitted by a
port (excluding preamble but including FCS).

The number of good packets received by a port that
are directed to the multicast address. This counter
does not include error multicast packets or valid
broadcast packets.

The number of good packets transmitted by a port that
are directed to a broadcast address. This counter
does not include errored broadcast packets or valid
multicast packets.

The number of good packets transmitted by a port that
are directed to a multicast address. This counter
does not include errored multicast packets or valid
broadcast packets.

The number of collision experienced by a port during
packet transmissions.

The number of good packets transmitted by a port
that are addressed to a unicast address.

The number packets successfully transmitted by a port
that experienced exactly one collision.

The number packets successfully transmitted by a port
that experienced more than one collision

The number packets successfully transmitted by a port
for which the first transmission attempt is delayed
because medium is busy.

The number of times that a collision is detected
later than 512 bit-times into the transmission of
a packet.

The number of packets that are not transmitted from
a port because the packet experienced 16 transmission
attempts.

The number of PAUSE frame transmitted by a port.
The MAC resolve to full duplex mode, with 803.3x
flow control PAUSE frame exchange enabled at the
completion of auto-negotiation.

The number of valid packets received which are
discarded by the forwarding process due to lack
of space on an output queue. Note: not maintained
or reported in the MIB counters. Located in
Congestion registers. This at…

The number of packets (including error packets)
that are 64 bytes long.

The number of packets (including error packets)
that are between 65 and 127 bytes long.

The number of packets (including error packets)
that are between 128 and 255 bytes long.

The number of packets (including error packets)
that are between 256 and 511 bytes long.

The number of packets (including error packets)
that are between 512 and 1023 bytes long.

The number of packets (including error packets)
that are between 1024 and 1522 bytes long.

A unique value for each CMM port. Its value starts from 1

A unique value for each CMM port. Its value starts from 1

A unique value for each CMM port. Its value starts from 1

A unique value for each CMM port.

The current operational state of the port.

Network connectivity, 100BaseT or 10BaseT.

Half-duplex data transmission or Full-duplex data transmission.

Port power status indicates power on or power off.

Port Uplink status indicates whether port is configred as an Uplink Port.

Management Port status indicates whether port is configred as a CMM3 Management Port.

User information table index.

User name.

User password.

User access level.