switchModulePowerOnOff

CME-MIB · .1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.7
MIB view Table view

Object

column mandatory r/w Enumeration 
I/O Module power on or power off.  If powering on a currently
powered off I/O Module, then the I/O Module will execute a POST.
The results of this POST will need to be retrieved using the 'Post Results'
command.
NOTE:
When powering off a currently powered on I/O Module, a minimum of 1 second
is needed to allow the module to power off before powering back on.
The value 'shutdownInProgress' is for I/O Modules that may take some time to
transition from 'poweron' to 'poweroff'.  
This MIB object can not be set, if MM grants the I/O Module the Protected Mode
permission and module goes into Protected Mode.

Context

MIB
CME-MIB
OID
.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.7
Type
column
Access
readwrite
Status
mandatory
Parent
smPowerRestartEntry
Table
smPowerRestartTable
Siblings
15

Syntax

Enumeration

Values & Constraints

Enumerated Values
0poweroff
1poweron
2shutdownInProgress

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
smPowerRestartIndex mandatory
Switch module power restart index.
columnInteger32.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.1
smRestartAndRunStdDiag mandatory
To power cycle the selected module(s) and then run the standard diagnostic test package. NOTE: Value returned for the GET command is meaningless for this MIB object.
columnEnumeration.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.10
smRestartAndRunExtDiag mandatory
To power cycle the selected module(s) and then run the extended diagnostic test package. This option is not supported on all I/O modules. NOTE: Value returned for t…
columnEnumeration.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.11
smRestartAndRunFullDiag mandatory
To power cycle the selected module(s) and then run the full diagnostic test package. The full diagnostic test package may take over 5 minutes to run. This option is not supported …
columnEnumeration.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.12
smPowerOnRestartDelay mandatory
Restart delay (in seconds) when power is applied to a switch module.
columnInteger32.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.15
smPowerRestartId mandatory
The switch module numeric identifier.
columnEnumeration.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.2
smSwitchWidth mandatory
Switch module width.
columnInteger32.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.21
smManufacturingID mandatory
Switch module hardware VPD manufacturing ID.
columnOctetString.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.22
smStackingModeState mandatory
The Stacking Mode Status for the switch module. standby - I/O module has stacking capability but is not part of a stack. member - I/O module has stacking capability and is part of…
columnEnumeration.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.23
smStackingModeInfo mandatory
A string containing a text description about the details of which functions are protected for a switch module when it is in Stacking Mode as Master or Member. The possible functio…
columnOctetString.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.24
smSwitchExists mandatory
Indicates whether the switch module specified exists or not.
columnEnumeration.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.3
smMACAddress mandatory
Switch module MAC address. For IOMs which are members of a stack, this field is not applicable and should be disregarded.
columnOctetString.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.5
smIPAddress mandatory
The switch module current IP address. If the switch module is participating in the Stacking Mode and IP Configuration is protected, then the stack management IP address is display…
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.6
smReset mandatory
For the case where the switch module is currently powered on, this command will effectively power off and then power on the switch module indicated and cause it to run its POST te…
columnEnumeration.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.8
smResetToDefault mandatory
For the case where the switch module is currently powered on, this command will effectively power off and then power on the switch module indicated and cause it to run its POST te…
columnEnumeration.1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.9