pd1ModulePowerCapabilities – CME-MIB

Object

column mandatory Enumeration

Power Domain 1 Table Module Power Capabilities.
              
staticPowerManagement: the module with the static worst
    case power values.
fixedPowermanagement: the module with the static power values but
    ability to throttle.
dynamicPowerManagement: the module with power meter capability,
    measurement enabled, but capping disabled.
dynamicPowerMeasurement1: the module with power meter capability,
    measurement enabled, phase 1 only
dynamicPowerMeasurement2: the module with power meter capability,
    measurement enabled, phase 2 or higher
dynamicPowerMeasurementWithPowerCapping: the module with power
    meter capability, both measurement and capping enabled,
    phase 2 or higher

Context

MIB: CME-MIB
OID: .1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.12
Type: column
Access: readonly
Status: mandatory
Parent: powerDomain1Entry
Table: powerDomain1Table
Siblings: 13

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	noAbility
`1`	staticPowerManagement
`2`	fixedPowerManagement
`3`	dynamicPowerManagement
`4`	dynamicPowerMeasurement1
`5`	dynamicPowerMeasurement2
`6`	dynamicPowerMeasurementWithPowerCapping
`255`	notApplicable

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pd1Index mandatory Power Domain 1 Table Index.	column	Integer32	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.1`
pd1ModuleCPUDutyCycles mandatory Power Domain 1 Table Module CPUs Duty Cycles applies to blade servers only. It displays the duty cycle for each CPU on the blade as a percentage. Note that some blades do not re…	column	OctetString	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.10`
pd1ModuleThrottle mandatory Power Domain 1 Table Module Throttle indicates whether the server blade may be allowed to throttle or not.	column	Enumeration	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.11`
pd1ModuleMeasuredOrStatic mandatory Power Domain 1 Table Module Measured Or Static.	column	Enumeration	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.13`
pd1TopologyPath mandatory The topology path for the component in this table. The chassis and each installed component is represented by a hardware topology tree, where each node in the tree represents a co…	column	OctetString	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.14`
pd1BayNumber mandatory Power Domain 1 Table Bay Number. The following Bay Number IDs are used: notApplicable(1), notApplicable(2), fanPackBay1(3), fanPackBay2(4), fanPackBay3(5), fanPackBay4(6), …	column	OctetString	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.2`
pd1BladePrimarySlot mandatory Power Domain 1 Table Blade Primary Slot can be useful when a server blade spans multiple slots (e.g. double wide or triple wide). For example if the blade is double wide and is i…	column	Enumeration	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.3`
pd1ModuleStatus mandatory Power Domain 1 Table Module Throttle Status.	column	Enumeration	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.4`
pd1ModuleName mandatory Power Domain 1 Table Module Name.	column	OctetString	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.5`
pd1ModuleState mandatory Power Domain 1 Table Module State.	column	Enumeration	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.6`
pd1ModuleAllocatedPowerCurrent mandatory Power Domain 1 Table Allocated Power Current indicates the current power allocation for the module in Watts. NOTE: When a server blade spans multiple slots (e.g. do…	column	OctetString	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.7`
pd1ModuleAllocatedPowerMax mandatory Power Domain 1 Table Allocated Power Max indicates the maximum power allocation for the module in Watts. It is indicative of the maximum amount of power the module will consume i…	column	OctetString	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.8`
pd1ModuleAllocatedPowerMin mandatory Power Domain 1 Table Allocated Power Min indicates the minumum power allocation for the module in Watts. It is indicative of the minumum power consumption of the component in the…	column	OctetString	`.1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.9`