bladeIPv4ConfigGatewayAddr

CME-MIB · .1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.8
MIB view Table view

Object

column mandatory r/w RFC1155-SMIIpAddress 
Show or modify current IP gateway of the blade network
interface.  Note that only if the
bladeIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
bladeIPv4ConfigDHCPEnable is not 'useDhcp(1)', should the
IP address be pushed down to blade System Management
Processor.

Context

MIB
CME-MIB
OID
.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.8
Type
column
Access
readwrite
Status
mandatory
Parent
bladeIPv4ConfigEntry
Table
bladeIPv4ConfigTable
Siblings
10

Syntax

RFC1155-SMIIpAddress
Source
RFC1155-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bladeIPv4ConfigIndex mandatory
The blade's slot number.
columnInteger32.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.1
bladeIPv4ConfigDHCPEnable mandatory
IP config method on the blade network interface to modify mode to static IP, DHCP and 'try DHCP then try static'. If this network interface doesn't support DHCP, show 'notApplicab…
columnEnumeration.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.10
bladeIPv4ConfigMACAddr mandatory
Show the blade network interface MAC address. If this network interface doesn't support MAC, show 'notApplicable'.
columnOctetString.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.11
bladeIPv4ConfigPortIndex mandatory
The physical port number of the given entry.
columnInteger32.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.2
bladeIPv4ConfigPortLabel mandatory
Show string label that identifies the interface.
columnOctetString.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.3
bladeIPv4ConfigPhysicalLinkStatus mandatory
Indicates whether this network interface port is up or down. If this network interface doesn't support up/down, show 'notApplicable(255)'.
columnEnumeration.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.4
bladeIPv4ConfigPhysicalLinkState mandatory
Configuration object for requesting the physical port to be either, down(0), up(1) or loopback(2). To get the current status of a physical port, use the object, bladeIPv4ConfigPhy…
columnEnumeration.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.5
bladeIPv4ConfigIPAddr mandatory
Show/modify current IP address of the blade network interface. Note that only if the bladeIPv4ConfigPhysicalLinkStatus is 'up(1)' and the bladeIPv4ConfigDHCPEnable is not 'useDhc…
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.6
bladeIPv4ConfigSubnetMask mandatory
Show or modifie current subnet mask of the blade network interface. Note that only if the bladeIPv4ConfigPhysicalLinkStatus is 'up(1)' and the bladeIPv4ConfigDHCPEnable is not 'u…
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.7
bladeIPv4ConfigVlanId mandatory
This is the Virtual LAN ID for supported network interface cards (NICs). The range of valid VLAN ID's is 0 to 4095.
columnInteger32.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.9