bladeIPv4ConfigDHCPEnable
CME-MIB ·
.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.10
Object
column
mandatory
r/w
Enumeration
IP config method on the blade network interface to modify mode to static IP, DHCP and 'try DHCP then try static'. If this network interface doesn't support DHCP, show 'notApplicable(255)'.
Context
- MIB
- CME-MIB
- OID
.1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.10- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- bladeIPv4ConfigEntry
- Table
- bladeIPv4ConfigTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | useStatic |
1 | useDhcp |
2 | tryDhcpThenTryStatic |
255 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bladeIPv4ConfigIndex mandatory The blade's slot number. | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.1 |
| bladeIPv4ConfigMACAddr mandatory Show the blade network interface MAC address. If this
network interface doesn't support MAC, show
'notApplicable'. | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.11 |
| bladeIPv4ConfigPortIndex mandatory The physical port number of the given entry. | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.2 |
| bladeIPv4ConfigPortLabel mandatory Show string label that identifies the interface. | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.3 |
| bladeIPv4ConfigPhysicalLinkStatus mandatory Indicates whether this network interface port is up or down.
If this network interface doesn't support up/down, show
'notApplicable(255)'. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.4 |
| bladeIPv4ConfigPhysicalLinkState mandatory Configuration object for requesting the physical port
to be either, down(0), up(1) or loopback(2). To get the
current status of a physical port, use the object,
bladeIPv4ConfigPhy… | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.5 |
| bladeIPv4ConfigIPAddr mandatory Show/modify current IP address of the blade network
interface. Note that only if the
bladeIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
bladeIPv4ConfigDHCPEnable is not 'useDhc… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.6 |
| bladeIPv4ConfigSubnetMask mandatory Show or modifie current subnet mask of the blade network
interface. Note that only if the
bladeIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
bladeIPv4ConfigDHCPEnable is not 'u… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.7 |
| bladeIPv4ConfigGatewayAddr mandatory Show or modify current IP gateway of the blade network
interface. Note that only if the
bladeIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
bladeIPv4ConfigDHCPEnable is not 'use… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.8 |
| bladeIPv4ConfigVlanId mandatory This is the Virtual LAN ID for supported network
interface cards (NICs). The range of valid VLAN ID's
is 0 to 4095. | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.9 |