cmdot11wifiHotspotConnectionSpeedTimeout

CM-dot11plus-MIB · .1.3.6.1.4.1.1166.1.19.51.3.1.9
MIB view Table view

Object

scalar r/w SNMPv2-SMIUnsigned32 
Timeout in seconds during which client is allowed to maintain connectivity
once connection speed is below cmdot11wifiHotspotConnectionSpeedMin. When timeout
expires client is disassociated.

Context

MIB
CM-dot11plus-MIB
OID
.1.3.6.1.4.1.1166.1.19.51.3.1.9
Type
scalar
Access
readwrite
Status
current
Parent
cmdot11wifiHotspotBase
Siblings
8

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmdot11wifiHotspotEnabled
Enables or disable Wifi Hotspot support in the device.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1166.1.19.51.3.1.1
cmdot11wifiHotspotTable
A table used to configure settings related to Wi-fi Hotspot.
table-.1.3.6.1.4.1.1166.1.19.51.3.1.2
cmdot11wifiHotspotAutRateLimit
Authentication rate limit in messages per second. If client exceeds this limit, authentication from the client is ignored for cmdot11wifiHotspotAutDenialTimeout.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1166.1.19.51.3.1.3
cmdot11wifiHotspotAutDenialTimeout
Timeout in seconds during which authentication from a client is ignored once authentication message rate exceeds cmdot11wifiHotspotAutRateLimit.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1166.1.19.51.3.1.4
cmdot11wifiHotspotRadiusOrigIf
Originating interface of radius authentication and accounting traffic.
scalarEnumeration.1.3.6.1.4.1.1166.1.19.51.3.1.5
cmdot11wifiHotspotIgnoreMaxCpeSetting
This setting is applicable for wifi hotspot bridged mode. When set to true(1), clients connected through the hotspot wifi will not be counted when enforcing the 'Maximum CPE devi…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1166.1.19.51.3.1.6
cmdot11wifiHotspotDisablePMKCaching
Enables or disable WPA2 PMK Caching.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1166.1.19.51.3.1.7
cmdot11wifiHotspotConnectionSpeedMin
Minimum connection speed in kbps required by client to maintain connectivity.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1166.1.19.51.3.1.8