cmdot11plusWpaAuthMode

CM-dot11plus-MIB · .1.3.6.1.4.1.1166.1.19.51.1.1.2.1
MIB view Table view

Object

scalar deprecated r/w Enumeration 
Sets the network authentication method to be used with WPA. 
Local(1) requires a valid WPA Pre-Shared Key to be set. This
	 mode is sometimes called WPA-PSK.
Remote(2) requires valid RADIUS parameters be set.  This mode
	 is sometimes called WPA with 802.1x authentication. 
          
This object is not writable and its return value should be ignored 
if cmdot11plusSecurityMode is not set to wpa(3). 
          
This MIB object is only valid for products supporting a single SSID

Context

MIB
CM-dot11plus-MIB
OID
.1.3.6.1.4.1.1166.1.19.51.1.1.2.1
Type
scalar
Access
readwrite
Status
deprecated
Parent
cmdot11plusWpaObjects
Siblings
7

Syntax

Enumeration

Values & Constraints

Enumerated Values
1local
2remote

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmdot11plusWpaGroupRekeyInterval deprecated
Sets the WPA Group Rekey Interval in seconds. Set to zero to disable periodic rekeying. This MIB object is only valid for products supporting a single SSID
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.1166.1.19.51.1.1.2.2
cmdot11plusWpaEncryptionMode deprecated
TKIP (Temporal Key Integrity Protocol) provides data encryption enhancements including a per-packet key mixing function, a MIC, an IV(initialization vector) and a re-keying mech…
scalarEnumeration.1.3.6.1.4.1.1166.1.19.51.1.1.2.3
cmdot11plusLocalPreSharedKey deprecated
Sets the WPA Pre-Shared Key (PSK). This value MUST a 8 to 63 character ASCII string. This MIB object is only valid for products supporting a single SSID
scalarOctetString.1.3.6.1.4.1.1166.1.19.51.1.1.2.4
cmdot11plusRemoteRadiusIpType deprecated
The address type assigned for the Radius IP address This MIB object is only valid for products supporting a single SSID
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.1166.1.19.51.1.1.2.5
cmdot11plusRemoteRadiusIp deprecated
Sets RADIUS server address. The type of address is determined by cmdot11plusRemoteRadiusIpType. If it is ipv4 then this should be set to the 4 octets representing the IP addres…
scalarOctetString.1.3.6.1.4.1.1166.1.19.51.1.1.2.6
cmdot11plusRemoteRadiusPort deprecated
Sets the UDP port used to communicate with the RADIUS server. This MIB object is only valid for products supporting a single SSID
scalarINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.1166.1.19.51.1.1.2.7
cmdot11plusRemoteRadiusKey deprecated
Sets or displays the RADIUS key. This MIB object is only valid for products supporting a single SSID
scalarOctetString.1.3.6.1.4.1.1166.1.19.51.1.1.2.8