cmdot11l2ogreSecRemoteAddressType
CM-dot11plus-MIB ·
.1.3.6.1.4.1.1166.1.19.51.4.1.4
Object
The IP address type (ipv4, ipv6 or dns) of secondary remote endpoint of the GRE tunnel.
Context
- MIB
- CM-dot11plus-MIB
- OID
.1.3.6.1.4.1.1166.1.19.51.4.1.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cmdot11l2ogreBase
- Siblings
- 15
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmdot11l2ogreEnabled Enables or disable GRE Tunnel support in the device. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.4.1.1 |
| cmdot11l2ogreKeepAliveFailureThreshold Number of keep-alive failures that will cause fail-over. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1166.1.19.51.4.1.10 |
| cmdot11l2ogreStatsTable This table provides statistical information of GRE tunnel. | table | - | .1.3.6.1.4.1.1166.1.19.51.4.1.11 |
| cmdot11l2ogreSourceIfTable This table contains information specific to network source interface
whose traffic is mapped into GRE tunnel. | table | - | .1.3.6.1.4.1.1166.1.19.51.4.1.12 |
| cmdot11l2ogreOrigIf Originating Interface of GRE tunnel. | scalar | Enumeration | .1.3.6.1.4.1.1166.1.19.51.4.1.13 |
| cmdot11l2ogreConcentratorServiceName FQDN of GRE tunnel concentrator/gw service.
If this is set then, DNS Query of type SRV will be used for discovering
FQDN of primary and secondary remote endpoint of GRE tunnel. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1166.1.19.51.4.1.14 |
| cmdot11l2ogreDnsResolverRetryTimerMin Minimum timeout interval in seconds before retrying DNS query. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1166.1.19.51.4.1.15 |
| cmdot11l2ogreDnsResolverRetryTimerMax Maximum timeout interval in seconds before retrying DNS query. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1166.1.19.51.4.1.16 |
| cmdot11l2ogrePriRemoteAddressType The IP address type (ipv4, ipv6 or dns) of primary remote
endpoint of the GRE tunnel. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.1166.1.19.51.4.1.2 |
| cmdot11l2ogrePriRemoteAddress IP address or FQDN of primary remote endpoint of the GRE tunnel. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.1166.1.19.51.4.1.3 |
| cmdot11l2ogreSecRemoteAddress IP address or FQDN of secondary remote endpoint of the GRE tunnel. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.1166.1.19.51.4.1.5 |
| cmdot11l2ogreDSCP The method is used to set the high 6 bits of TOS in the
IPv4 header or traffic class in IPv6 header. | scalar | Integer32 | .1.3.6.1.4.1.1166.1.19.51.4.1.6 |
| cmdot11l2ogreKeepAliveMode Keepalive modes for failover mechanism.
ping - Use ICMP pings within tunnel as a keepalive messages. | scalar | Enumeration | .1.3.6.1.4.1.1166.1.19.51.4.1.7 |
| cmdot11l2ogreKeepAliveCount Number of keep-alive messages sent at regular interval. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1166.1.19.51.4.1.8 |
| cmdot11l2ogreKeepAliveInterval Interval in seconds between keep-alive messages. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1166.1.19.51.4.1.9 |