rlIpv6GeneralPrefixTable

CISCOSB-IPv6 · .1.3.6.1.4.1.9.6.1.101.129.4

MIB view Table view

Object

table

This table defines general prefix description,
based on which a number of longer, more specific, prefixes can
be defined.

Context

MIB: CISCOSB-IPv6
OID: .1.3.6.1.4.1.9.6.1.101.129.4
Type: table
Status: current
Parent: rlIPv6
Siblings: 18
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

Enumerated Values

`1`	stack
`2`	ethernet

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rlipv6IcmpErrorRatelimitInterval The time interval between tokens being placed in the bucket, each token represents a single ICMP error message. The interval measured in milliseconds.	scalar	SNMPv2-TCTimeInterval	`.1.3.6.1.4.1.9.6.1.101.129.1`
rlIpNetToPhysicalTableClearTable This entity is used to clear all or specific-type entries from ipNetToPhysicalTable.	table	-	`.1.3.6.1.4.1.9.6.1.101.129.10`
rlIpv6HostForwardingTable This entity's IPv6 host forwarding table.	table	-	`.1.3.6.1.4.1.9.6.1.101.129.11`
rlipv6EnabledByDefaultRemovedIfindex the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE. If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration b…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.6.1.101.129.12`
rlManagementIpv6 The system management IPv6 address which is kept between system mode changes	scalar	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.6.1.101.129.13`
rlManagementIpv6Action The system management IPv6 action: clear - delete all ipv6 interfaces from startup configuration database except rlManagementIpv6	scalar	Enumeration	`.1.3.6.1.4.1.9.6.1.101.129.14`
rlIpv6TunnelToIPv6DbTable This entity's IPv6 Tunnel if/addr/prefix table.	table	-	`.1.3.6.1.4.1.9.6.1.101.129.15`
rlIpv6DefaultTC The default value inserted into the TC field of the IPv6 header of datagrams originated at this entity, whenever a TC value is not supplied by the application.	scalar	Integer32	`.1.3.6.1.4.1.9.6.1.101.129.16`
rlIpv6DefaultUP The default value inserted into the User Priority field in the 802.1q VLAN tag of IPv4 frames sent by the CPU.	scalar	Integer32	`.1.3.6.1.4.1.9.6.1.101.129.17`
rlIpv6MtuSize Sets the maximum transmission unit (MTU) size in bytes of IPv6 packets (payload).	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.6.1.101.129.18`
rlInetStaticRouteAuxMappingTable This entity's IPv6 auxulary mapping table. Serves to map nexthop ipv6 address to on-link prefix ifindex	table	-	`.1.3.6.1.4.1.9.6.1.101.129.19`
rlipv6IcmpErrorRatelimitBucketSize The maximum number of tokens stored in the bucket, each token represents a single ICMP error message.	scalar	Integer32	`.1.3.6.1.4.1.9.6.1.101.129.2`
rlipv6LLDefaultZone The interface which would be used as the egress interface for packets sent without a specified IPv6Z interface identifier or with the default '0' identifier. Zero value means no d…	scalar	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.9.6.1.101.129.3`
rlipv6MaximumHopsNumber Maximum number of hops used in router advertisements and all IPv6 packets that are originated by the router.	scalar	Integer32	`.1.3.6.1.4.1.9.6.1.101.129.5`
rlIpv6RouterAdvertPrefixTable This table defines IPv6 prefixes which are included in IPv6 Neighbor Discovery (ND) router advertisements.	table	-	`.1.3.6.1.4.1.9.6.1.101.129.6`
rlIpv6RouterAdvertTable This table is parallel to inetCidrRouteTable, and is used to configure or display additional route parameters.	table	-	`.1.3.6.1.4.1.9.6.1.101.129.7`
rlipv6InetCidrTableClear This scalar indicates to clear all ipv6 routes from inetCidrTable.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.6.1.101.129.8`
rlIpv6PathMtuTable This table used to represent all Path MTU changes to specific destination received from 'packet-too-big' messages.	table	-	`.1.3.6.1.4.1.9.6.1.101.129.9`

Child Objects