p2mpRfType
CISCO-WIRELESS-P2MP-PHY-MIB ·
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.2
Object
column
CISCO-WIRELESS-TC-MIBCwrRfType
This object identifies the RF resource.
Context
- MIB
- CISCO-WIRELESS-P2MP-PHY-MIB
- OID
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- p2mpRfEntry
- Table
- p2mpRfTable
- Siblings
- 14
Syntax
CISCO-WIRELESS-TC-MIBCwrRfType
- Source
- CISCO-WIRELESS-TC-MIBCwrRfType
- Base type
Enumeration
Values & Constraints
Type Values
0 | main |
1 | diversity |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| p2mpRfIndex This object, along with the ifIndex of the MAC layer,
represents the index of this entry in the p2mpRfTable.
Each entry in the table provides details on the state of
the RF re… | column | Integer32 | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.1 |
| p2mpRfTemperature This object represents the current temperature of the RF unit | column | Degrees Centigrade Integer32 | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.10 |
| p2mpRfTxOscState This object represents the state of the transmit oscillator.
The oscillator must be in oscillatorOk(1) state for the system
to function properly. | column | CISCO-WIRELESS-TC-MIBCwrOscState | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.11 |
| p2mpRfRxOscState This object represents the state of the receive oscillator.
The oscillator must be in oscillatorOk(1) state for the system
to function properly. | column | CISCO-WIRELESS-TC-MIBCwrOscState | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.12 |
| p2mpRfSupplyVoltageState This object specifies whether the voltage supply to the RF
unit is within specifications or not. Voltage specifications
are hardware dependent. | column | Enumeration | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.13 |
| p2mpRfStatus This object specifies whether the RF resource is functioning
properly. If it is functioning properly then it will be
online(1), else offline(2).
At the Subscriber Unit, this obj… | column | Enumeration | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.14 |
| p2mpRfLoopbackSupported This object indicates if the RF unit supports loopback.
When true(1), the user can configure loopback using the
objects in p2mpLoopbackTable. When false(2), any attempt
to config… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.15 |
| p2mpRfOpMode This object specifies whether this RF resource can either
transmit, receive, or do both. | column | Enumeration | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.3 |
| p2mpTxFreqRangeMin This object represents the minimum frequency at which this RF
resource can transmit. | column | KHz CISCO-WIRELESS-TC-MIBCwrRfFreqRange | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.4 |
| p2mpTxFreqRangeMax This object represents the maximum frequency at which this RF
resource can transmit. | column | KHz CISCO-WIRELESS-TC-MIBCwrRfFreqRange | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.5 |
| p2mpRxFreqRangeMin This object represents the lowest transmission frequency this
RF resource can receive. | column | KHz CISCO-WIRELESS-TC-MIBCwrRfFreqRange | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.6 |
| p2mpRxFreqRangeMax This object represents the highest transmission frequency that
this RF resource can receive. | column | KHz CISCO-WIRELESS-TC-MIBCwrRfFreqRange | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.7 |
| p2mpMinTxPower This object represents the minimum power that the RF subsystem
can supply the antenna. | column | dBm Integer32 | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.8 |
| p2mpMaxTxPower This object represents the maximum power that the RF subsystem
can supply the antenna. | column | dBm Integer32 | .1.3.6.1.4.1.9.9.170.1.1.2.1.1.9 |