p2mpDiversityAntennaPresent
CISCO-WIRELESS-P2MP-PHY-MIB ·
.1.3.6.1.4.1.9.9.170.1.1.1.1.1.2
Object
When true(1), this object indicates that a diversity antenna is being used to receive the wireless transmissions. When false(2), the radio system is using a single antenna to transmit and receive.
Context
- MIB
- CISCO-WIRELESS-P2MP-PHY-MIB
- OID
.1.3.6.1.4.1.9.9.170.1.1.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- p2mpRadioPhyEntry
- Table
- p2mpRadioPhyTable
- Siblings
- 8
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| p2mpSelfTest This object is used to enable/disable self test. When set to
true(1), the software tests the memory and hardware integrity
shortly after the router powers up. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.170.1.1.1.1.1.1 |
| p2mpCableLoss This object indicates the measured signal power loss in dB
due to the cable connecting the radio to the main antenna.
The hardware compensates for this cable loss by adjusting the… | column | dB Unsigned32 | .1.3.6.1.4.1.9.9.170.1.1.1.1.1.3 |
| p2mpCableLossDiversity This object indicates the measured signal power loss in dB
due to the cable connecting the radio to the diversity
antenna. The hardware compensates for this loss by adjusting
… | column | dB Unsigned32 | .1.3.6.1.4.1.9.9.170.1.1.1.1.1.4 |
| p2mpDenyService Indicates if the service is disabled in the unit.
For Head-end unit, if this object has the value of
'true', the link is in loopback mode; otherwise the
link is enabled for tran… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.170.1.1.1.1.1.5 |
| p2mpClockRefExt This object controls the use of external reference
clock for IF module as follows:
'true(1)' - an external reference clock is used
'false(2)' - an internal reference clock is us… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.170.1.1.1.1.1.6 |
| p2mpCommonTrapEnable When set to true(1), the notifications common to the head end
and subscriber unit are enabled. When set to false(2), these
notifications are disabled.
The notification controll… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.170.1.1.1.1.1.7 |
| p2mpLastPhyFailureType This object indicates the last physical link failure that
resulted in a p2mpRadioPhyFailNotification trap.
none(1) - no failure
p2mpHwConfig… | column | Enumeration | .1.3.6.1.4.1.9.9.170.1.1.1.1.1.8 |
| p2mpLastPhyFailureReason This is a text string that describes the last physical link
failure identified by p2mpLastPhyFailureType. | column | OctetString | .1.3.6.1.4.1.9.9.170.1.1.1.1.1.9 |