cwrTrapRfTxOsc
CISCO-WIRELESS-IF-MIB ·
.1.3.6.1.4.1.9.9.136.2.2.11
Object
notification
The RF transmit frequency oscillator has changed state. The cwrRfIndex identifies the RF resource that is the cause of this trap. The cwrRfRxOscState specifies the state of the oscilator.
Context
- MIB
- CISCO-WIRELESS-IF-MIB
- OID
.1.3.6.1.4.1.9.9.136.2.2.11- Type
- notification
- Status
- current
- Parent
- cwrRadioDevTraps
- Siblings
- 14
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwrTrapConfigMismatch The radio subsystem has detected that the combination of the
configuration parameters that has been requested is inconsistent
and cannot be supported.
The cwrTrapReason is the tex… | notification | - | .1.3.6.1.4.1.9.9.136.2.2.1 |
| cwrTrapRfRxOsc The RF receive frequency oscillator has changed state.
The cwrRfIndex identifies the RF resource that is the cause
of this trap. The cwrRfRxOscState specifies the
state of the osc… | notification | - | .1.3.6.1.4.1.9.9.136.2.2.10 |
| cwrTrapRfTemp The temperature of the RF module identified by cwrRfIndex
has exceeded a defined reference. | notification | - | .1.3.6.1.4.1.9.9.136.2.2.12 |
| cwrTrapRfStatusChange This trap indicates that the RF resource either
came online(1) or went offline(2).
The cwrRfIndex will identify which resource changed state
and cwrRfStatus will identify what st… | notification | - | .1.3.6.1.4.1.9.9.136.2.2.13 |
| cwrTrapLink1HrThresh One of cwrLink1HrESAlarmThresh, cwrLink1HrSESAlarmThresh,
cwrLink1HrCSESAlarmThresh, cwrLink1HrDCMAlarmThresh was
was exceeded. The cwrTrapReason will identify which
threshold was… | notification | - | .1.3.6.1.4.1.9.9.136.2.2.14 |
| cwrTrapLink24HrThresh One of cwrLink24HrESAlarmThresh, cwrLink24HrSESAlarmThresh,
cwrLink24HrCSESAlarmThresh, cwrLink24HrDCMAlarmThresh was
was exceeded. The cwrTrapReason will identify which
threshold… | notification | - | .1.3.6.1.4.1.9.9.136.2.2.15 |
| cwrTrapInitFailure The radio subsystem has failed to initialize the hardware
successfully.
This implies that there is a critical error condition in the
associated hardware. The cwrTrapReason speci… | notification | - | .1.3.6.1.4.1.9.9.136.2.2.2 |
| cwrTrapLinkQuality The radio subsystem has detected a significant change in
the radio link quality. The cwrTrapReason will describe
the quality. | notification | - | .1.3.6.1.4.1.9.9.136.2.2.3 |
| cwrTrapLinkSyncLost The radio link has lost synchronization with the remote end. | notification | - | .1.3.6.1.4.1.9.9.136.2.2.4 |
| cwrTrapLinkSyncAcquired The radio link has acquired synchronization with the remote end. | notification | - | .1.3.6.1.4.1.9.9.136.2.2.5 |
| cwrTrapIfRxOsc The IF receive frequency oscillator has changed state. | notification | - | .1.3.6.1.4.1.9.9.136.2.2.6 |
| cwrTrapIfTxOsc The IF transmit frequency oscillator has changed state. | notification | - | .1.3.6.1.4.1.9.9.136.2.2.7 |
| cwrTrapIfRefOsc The IF Reference Frequency oscillator has changed state. | notification | - | .1.3.6.1.4.1.9.9.136.2.2.8 |
| cwrTrapRfSupplyVoltage The supply voltage to the RF resource has changed.
The cwrRfSupplyVoltageState specifies whether the supply voltage is
in spec or not. | notification | - | .1.3.6.1.4.1.9.9.136.2.2.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| cwrRfTxOscState This object represents the state of the transmit oscillator. The
oscillator must be in oscillatorOk(1) state for the system to
function properly. | column | CISCO-WIRELESS-TC-MIBCwrOscState | .1.3.6.1.4.1.9.9.136.1.5.1.1.10 |