cwrTlToneSelection

CISCO-WIRELESS-IF-MIB · .1.3.6.1.4.1.9.9.136.1.8.2.1.8

MIB view Table view

Object

column r/w Enumeration

This object identifies which tone in a burst should be used to
sample data for the timeline. 
cwrCirculate(1):
    The successive tone will be used for every successive burst.
cwrAverage(2):
    The value of every tone in a burst will be averaged.
cwrspecific(3):
    The identified tone is used.
    DEFVAL { cwrAverage }

Context

MIB: CISCO-WIRELESS-IF-MIB
OID: .1.3.6.1.4.1.9.9.136.1.8.2.1.8
Type: column
Access: readwrite
Status: current
Parent: cwrTlCtrlEntry
Table: cwrTlCtrlTable
Siblings: 13

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	cwrCirculate
`2`	cwrAverage
`3`	cwrSpecific

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cwrTlIndex This object, along with ifIndex, is the index into this table and represents one entry in the table. The entry in this table for which cwrTlIndex = x is associated with the entry…	column	Integer32	`.1.3.6.1.4.1.9.9.136.1.8.2.1.1`
cwrTlThreshIndex This object specifies the index of the threshold that when triggered will start the data capture for this timeline. For a timeline data capture to be triggered by …	column	Integer32	`.1.3.6.1.4.1.9.9.136.1.8.2.1.10`
cwrTlAction This object represents the action to be carried out on this timeline specification. If a timeline has been successfully captured then it must be cleared before an other capture ma…	column	CISCO-WIRELESS-TC-MIBCwrCollectionAction	`.1.3.6.1.4.1.9.9.136.1.8.2.1.11`
cwrTlStatus This object represents the current state of this timeline collection. Once the timeline collection is complete the status changes statusCaptured and the data is available for use…	column	CISCO-WIRELESS-TC-MIBCwrCollectionStatus	`.1.3.6.1.4.1.9.9.136.1.8.2.1.12`
cwrTlPostTrigBufMgmt Once a trigger fires, this object determines which portion of the collected data to capture for use. If it is: preTrigger(1) : Then most of the data collected prior to trigger …	column	Enumeration	`.1.3.6.1.4.1.9.9.136.1.8.2.1.13`
cwrTlRowStatus This object may be used to create or delete a timeline control specification. Once created data sampling starts based on the value of cwrTlAction. The data capture…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.136.1.8.2.1.14`
cwrTlClass This object represents the attribute for which a timline capture is requested. When a timeline is requested, cwrTlNumDataValues worth of data will be captured.	column	CISCO-WIRELESS-TC-MIBCwrRadioSignalAttribute	`.1.3.6.1.4.1.9.9.136.1.8.2.1.2`
cwrTlRfResourceId This object identifies the RF resource for which this timeline specification applies. If this is 0 then the agent will automatically the most logical value for the specified cwrH…	column	CISCO-WIRELESS-TC-MIBCwrRFZeroIndex	`.1.3.6.1.4.1.9.9.136.1.8.2.1.3`
cwrTlDspNum This object identifies the DSP on which this timeline needs to be captures. If 0 is specified then the agent will automatically use the most logical DSP for the specified cwrTlCla…	column	Integer32	`.1.3.6.1.4.1.9.9.136.1.8.2.1.4`
cwrTlNumDataValues This object indicates the number of data values to be captured for this timeline. The captured data can be viewed by reading the cwrTlDataTable.	column	number of data values Integer32	`.1.3.6.1.4.1.9.9.136.1.8.2.1.5`
cwrTlDecimationFactor This object represents the number of successive data samples to be added and returned. This enables larger data sets to be captured even with limited cwrTlNumDataValues.	column	Integer32	`.1.3.6.1.4.1.9.9.136.1.8.2.1.6`
cwrTlPreSumShift This object represents the number of bits by which the raw data data should be right shifted before applying cwrTlDecimationFactor. This provides a mechanims of controlling overfl…	column	Integer32	`.1.3.6.1.4.1.9.9.136.1.8.2.1.7`
cwrTlToneValue If cwrTlToneSelection is cwrSpecificTone then this object identifies the tone that should be used for sampling.	column	Integer32	`.1.3.6.1.4.1.9.9.136.1.8.2.1.9`