cwrTlStatus
CISCO-WIRELESS-IF-MIB ·
.1.3.6.1.4.1.9.9.136.1.8.2.1.12
Object
column
CISCO-WIRELESS-TC-MIBCwrCollectionStatus
This object represents the current state of this timeline collection. Once the timeline collection is complete the status changes statusCaptured and the data is available for use. None of the parameters of a timeline specification may be modified when the specification is in statusInProgress. A statusCaptured or statusStopped histogram must be actionClear'ed before another timeline specification may be started.
Context
- MIB
- CISCO-WIRELESS-IF-MIB
- OID
.1.3.6.1.4.1.9.9.136.1.8.2.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cwrTlCtrlEntry
- Table
- cwrTlCtrlTable
- Siblings
- 13
Syntax
CISCO-WIRELESS-TC-MIBCwrCollectionStatus
- Source
- CISCO-WIRELESS-TC-MIBCwrCollectionStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | statusIdle |
2 | statusInProgress |
3 | statusStopped |
4 | statusCaptured |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwrTlIndex This object, along with ifIndex, is the index into this table
and represents one entry in the table. The entry in this table
for which cwrTlIndex = x is associated with the entry… | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.1 |
| cwrTlThreshIndex This object specifies the index of the threshold that when
triggered will start the data capture for this timeline.
For a timeline data capture to be triggered by … | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.10 |
| cwrTlAction This object represents the action to be carried out on this
timeline specification. If a timeline has been successfully
captured then it must be cleared before an other capture
ma… | column | CISCO-WIRELESS-TC-MIBCwrCollectionAction | .1.3.6.1.4.1.9.9.136.1.8.2.1.11 |
| cwrTlPostTrigBufMgmt Once a trigger fires, this object determines which portion of the
collected data to capture for use. If it is:
preTrigger(1) : Then most of the data collected prior to trigger
… | column | Enumeration | .1.3.6.1.4.1.9.9.136.1.8.2.1.13 |
| cwrTlRowStatus This object may be used to create or delete a timeline control
specification.
Once created data sampling starts based on the value of
cwrTlAction. The data capture… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.136.1.8.2.1.14 |
| cwrTlClass This object represents the attribute for which a timline capture
is requested.
When a timeline is requested, cwrTlNumDataValues worth of data
will be captured. | column | CISCO-WIRELESS-TC-MIBCwrRadioSignalAttribute | .1.3.6.1.4.1.9.9.136.1.8.2.1.2 |
| cwrTlRfResourceId This object identifies the RF resource for which this timeline
specification applies.
If this is 0 then the agent will automatically the most logical
value for the specified cwrH… | column | CISCO-WIRELESS-TC-MIBCwrRFZeroIndex | .1.3.6.1.4.1.9.9.136.1.8.2.1.3 |
| cwrTlDspNum This object identifies the DSP on which this timeline needs to be
captures.
If 0 is specified then the agent will automatically use the most
logical DSP for the specified cwrTlCla… | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.4 |
| cwrTlNumDataValues This object indicates the number of data values to be captured for
this timeline. The captured data can be viewed by reading the
cwrTlDataTable. | column | number of data values Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.5 |
| cwrTlDecimationFactor This object represents the number of successive data samples to be
added and returned. This enables larger data sets to be captured
even with limited cwrTlNumDataValues. | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.6 |
| cwrTlPreSumShift This object represents the number of bits by which the raw data
data should be right shifted before applying cwrTlDecimationFactor.
This provides a mechanims of controlling overfl… | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.7 |
| cwrTlToneSelection This object identifies which tone in a burst should be used to
sample data for the timeline.
cwrCirculate(1):
The successive tone will be used for every successive burst.
cwr… | column | Enumeration | .1.3.6.1.4.1.9.9.136.1.8.2.1.8 |
| cwrTlToneValue If cwrTlToneSelection is cwrSpecificTone then this object
identifies the tone that should be used for sampling. | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.9 |