cwrTlPostTrigBufMgmt
CISCO-WIRELESS-IF-MIB ·
.1.3.6.1.4.1.9.9.136.1.8.2.1.13
Object
column
r/w
Enumeration
Once a trigger fires, this object determines which portion of the
collected data to capture for use. If it is:
preTrigger(1) : Then most of the data collected prior to trigger
is captured.
postTrigger(2): Then most of the data collected after the trigger
is captured.
Context
- MIB
- CISCO-WIRELESS-IF-MIB
- OID
.1.3.6.1.4.1.9.9.136.1.8.2.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cwrTlCtrlEntry
- Table
- cwrTlCtrlTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | preTrigger |
2 | postTrigger |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwrTlIndex This object, along with ifIndex, is the index into this table
and represents one entry in the table. The entry in this table
for which cwrTlIndex = x is associated with the entry… | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.1 |
| cwrTlThreshIndex This object specifies the index of the threshold that when
triggered will start the data capture for this timeline.
For a timeline data capture to be triggered by … | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.10 |
| cwrTlAction This object represents the action to be carried out on this
timeline specification. If a timeline has been successfully
captured then it must be cleared before an other capture
ma… | column | CISCO-WIRELESS-TC-MIBCwrCollectionAction | .1.3.6.1.4.1.9.9.136.1.8.2.1.11 |
| cwrTlStatus This object represents the current state of this timeline
collection.
Once the timeline collection is complete the status changes
statusCaptured and the data is available for use… | column | CISCO-WIRELESS-TC-MIBCwrCollectionStatus | .1.3.6.1.4.1.9.9.136.1.8.2.1.12 |
| cwrTlRowStatus This object may be used to create or delete a timeline control
specification.
Once created data sampling starts based on the value of
cwrTlAction. The data capture… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.136.1.8.2.1.14 |
| cwrTlClass This object represents the attribute for which a timline capture
is requested.
When a timeline is requested, cwrTlNumDataValues worth of data
will be captured. | column | CISCO-WIRELESS-TC-MIBCwrRadioSignalAttribute | .1.3.6.1.4.1.9.9.136.1.8.2.1.2 |
| cwrTlRfResourceId This object identifies the RF resource for which this timeline
specification applies.
If this is 0 then the agent will automatically the most logical
value for the specified cwrH… | column | CISCO-WIRELESS-TC-MIBCwrRFZeroIndex | .1.3.6.1.4.1.9.9.136.1.8.2.1.3 |
| cwrTlDspNum This object identifies the DSP on which this timeline needs to be
captures.
If 0 is specified then the agent will automatically use the most
logical DSP for the specified cwrTlCla… | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.4 |
| cwrTlNumDataValues This object indicates the number of data values to be captured for
this timeline. The captured data can be viewed by reading the
cwrTlDataTable. | column | number of data values Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.5 |
| cwrTlDecimationFactor This object represents the number of successive data samples to be
added and returned. This enables larger data sets to be captured
even with limited cwrTlNumDataValues. | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.6 |
| cwrTlPreSumShift This object represents the number of bits by which the raw data
data should be right shifted before applying cwrTlDecimationFactor.
This provides a mechanims of controlling overfl… | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.7 |
| cwrTlToneSelection This object identifies which tone in a burst should be used to
sample data for the timeline.
cwrCirculate(1):
The successive tone will be used for every successive burst.
cwr… | column | Enumeration | .1.3.6.1.4.1.9.9.136.1.8.2.1.8 |
| cwrTlToneValue If cwrTlToneSelection is cwrSpecificTone then this object
identifies the tone that should be used for sampling. | column | Integer32 | .1.3.6.1.4.1.9.9.136.1.8.2.1.9 |