cwrSnapshotType

This object represents the attribute that is being snapshoted by
the hardware. When a snapshot request is issued up to 4 simultaneous
radio signal attribute may be captured at once. 
The 4 attributes are specified by bit OR'ing the snapshot types
identified below. When a snapshot specification
is started all the specified attributes are captured simultaneously.
              
The TX and RX types cannot be mixed. RX, Sync types can be mixed.
              
When a snapshot request is issued up to four radio signal attributes
may be requested at once, one from each set:
===============================================
Type   Set1               Set2              
===============================================
RX     y1n(x1)            y2n(x2)           
       H2k(x80)           H1k(x40)          
       -                  -                 
Sync   -                  FreqCorr(x8000)   
       -                  FLL_FFT_Sp(x20000)
TX     CodecIn(x200)      IFFTIn(x400)      
===============================================
              
===============================================
Type   Set3                Set4
===============================================
RX     Y2k(x8)             Y1k(x4)
       h1n(x10)            h2n(x20)
       zhat(x100)          -
Sync   FreqOffCF(x2000)(*) BrstTimeCF(x1000)(*)
       -                   TT_FCorr(x10000)
TX     -                   RoundOut(x800)
===============================================
              
(*)  BrstTimeCF cannot be mixed with Set2
(*)  FreqOffCF  cannot be mixed with Set1
              
Note that only the Tx* attributes may be captured on DSP's 1, 2.    
              
The attributes are:
RxRawBurstAnt1Y1n(0x01):
    This represents a snapshot of the received signal for RF
    resource 1. For every sample the real and imaginary components
    are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
RxRawBurstAnt2Y2n(0x02):
    This represents a snapshot of the received signal for RF
    resource 2. For every sample the real and imaginary components
    are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
RxSpectrumAnt1Y1k(0x04):
    This represents a snapshot of the spectrum of the received
    signal for RF resource 1. For every sample the real and
    imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
RxSpectrumAnt2Y2k(0x08):
    This represents a snapshot of the spectrum of the received
    signal for RF resource 2. For every sample the real and
    imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
RxTimeDomainChannelAnt1H1n(0x10):
    This represents a snapshot of the time domain channel
    for RF resource 1. For every sample the real and
    imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
RxTimeDomainChannelAnt2H2n(0x20):
    This represents a snapshot of the time domain channel
    for RF resource 2. For every sample the real and
    imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
RxFreqDomainChannelAnt1H1k(0x40):
    This represents a snapshot of the frequency domain channel
    for RF resource 1. For every sample the real and
    imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
RxFreqDomainChannelAnt2H2k(0x80),
    This represents a snapshot of the frequency domain channel
    for RF resource 2. For every sample the real and
    imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
RxConstellationZHatk(0x100):
    This represents a snapshot of the soft decisions.
    For every sample the real and imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
TxCodecInput(0x200):
    This represents a snapshot of input values to the Tx Code.
    Units: Real values.
    Value: 32 bit quantities.
              
TxIFFTInput(0x400):
    This represents a snapshot of the IFFT signal for the
    Transmitted data. 
    For every sample the real and imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
TxRoundOutput(0x800):
    This represents a snapshot of the Rounded Constellation signal
    for the Transmitted data. 
    For every sample the real and imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
SyncBurstTimeCostFunc(0x1000):
    This represents the timing cost function for Sync bursts. 
    Units: Real values.
    Value: 32 bit quantities.
              
SynFreqOffsetCostFunc(0x2000):
    This represents a snapshot of the frequeny offsets.
    For every sample the real and imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
SyncFllFreqCorrelation(0x8000):
    This represents a snapshot of Frequency correlation.
    For every sample the real and imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
SyncFllTrainToneCorrelation(0x10000):
    This represents a snapshot of Frequency locked loop's Training
    tone correlation.
    For every sample the real and imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.
              
SyncFllFFTSpectrum(0x20000):
    This represents a snapshot of Frequency locked loop, FFT
    Spectrum.
    For every sample the real and imaginary components are captured.
    Units: (I, q)
    Value: 32 bit quantities.

MIB

CISCO-WIRELESS-IF-MIB

OID

.1.3.6.1.4.1.9.9.136.1.9.1.1.2

Type

column

Access

readwrite

Status

current

Parent

cwrSnapshotCtrlEntry

Table

cwrSnapshotCtrlTable

Siblings

4