seqToneNumOfFrequencies
CISCO-WAN-VISM-TONE-PLAN-MIB ·
.1.3.6.1.4.1.351.150.24.1.1.4.1
Object
scalar
r/w
Integer32
The number of single frequencies which have to be detected by the sequential tone detector command on VISM. The frequencies should specified below (seqToneFrequency1 to seqToneFrequency10). This number should correspond to the non-zero frequency values seqToneFrequency1 to seqToneFrequency10.
Context
- MIB
- CISCO-WAN-VISM-TONE-PLAN-MIB
- OID
.1.3.6.1.4.1.351.150.24.1.1.4.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- vismSequentialToneDetectGrp
- Siblings
- 19
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-10
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| seqTonePowerLevelFloor Lowest (floor) power level of the sequential
frequency tone (absolute value in dBm)
used with sequential tone detector on VISM DSP.
Range from 0 to 40 (0 to -40dB) | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.10 |
| seqToneFrequency1 1st frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.11 |
| seqToneFrequency2 2nd frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.12 |
| seqToneFrequency3 3rd frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.13 |
| seqToneFrequency4 4th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.14 |
| seqToneFrequency5 5th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.15 |
| seqToneFrequency6 6th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.16 |
| seqToneFrequency7 7th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.17 |
| seqToneFrequency8 8th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.18 |
| seqToneFrequency9 9th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.19 |
| seqToneEventID The eventID corresponding to the sequential frequency.
Currently only supports Event 74 (SIT tone) | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.2 |
| seqToneFrequency10 10th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.20 |
| seqToneDurationOfEachTone Nominal tone duration of each single tone in counts of 10ms
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.3 |
| seqToneGapBetweenEachTone Nominal silence gap duration between each tone in 10ms
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.4 |
| seqToneDurationDeviation Tone duration deviation allowed in 10ms
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.5 |
| seqToneMaximumGapDuration Maximum tone duration allowed in 10ms
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.6 |
| seqToneGapDurationDeviation Tone duration deviation allowed in 10ms
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.7 |
| seqToneFreqDeviation Frequency deviation allowed (1 - 1000 Hz)
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.8 |
| seqTonePowerLevelCeiling Maximum ceiling power level of the sequential
frequency tone (absolute value in dBm)
used with sequential tone detector on VISM DSP.
Range from 0 to 40 (0 to -40dB) | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.9 |