seqToneFrequency8
CISCO-WAN-VISM-TONE-PLAN-MIB ·
.1.3.6.1.4.1.351.150.24.1.1.4.18
Object
scalar
r/w
Integer32
8th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
Context
- MIB
- CISCO-WAN-VISM-TONE-PLAN-MIB
- OID
.1.3.6.1.4.1.351.150.24.1.1.4.18- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- vismSequentialToneDetectGrp
- Siblings
- 19
Syntax
Integer32
Values & Constraints
Object Constraints
range: 280-3800
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| seqToneNumOfFrequencies The number of single frequencies which have to be detected
by the sequential tone detector command on VISM. The
frequencies should specified below (seqToneFrequency1 to
seqToneF… | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.1 |
| seqTonePowerLevelFloor Lowest (floor) power level of the sequential
frequency tone (absolute value in dBm)
used with sequential tone detector on VISM DSP.
Range from 0 to 40 (0 to -40dB) | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.10 |
| seqToneFrequency1 1st frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.11 |
| seqToneFrequency2 2nd frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.12 |
| seqToneFrequency3 3rd frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.13 |
| seqToneFrequency4 4th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.14 |
| seqToneFrequency5 5th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.15 |
| seqToneFrequency6 6th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.16 |
| seqToneFrequency7 7th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.17 |
| seqToneFrequency9 9th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.19 |
| seqToneEventID The eventID corresponding to the sequential frequency.
Currently only supports Event 74 (SIT tone) | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.2 |
| seqToneFrequency10 10th frequency in the SequentialTone to detect (280 - 3800),
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.20 |
| seqToneDurationOfEachTone Nominal tone duration of each single tone in counts of 10ms
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.3 |
| seqToneGapBetweenEachTone Nominal silence gap duration between each tone in 10ms
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.4 |
| seqToneDurationDeviation Tone duration deviation allowed in 10ms
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.5 |
| seqToneMaximumGapDuration Maximum tone duration allowed in 10ms
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.6 |
| seqToneGapDurationDeviation Tone duration deviation allowed in 10ms
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.7 |
| seqToneFreqDeviation Frequency deviation allowed (1 - 1000 Hz)
used with sequential tone detector on VISM DSP. | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.8 |
| seqTonePowerLevelCeiling Maximum ceiling power level of the sequential
frequency tone (absolute value in dBm)
used with sequential tone detector on VISM DSP.
Range from 0 to 40 (0 to -40dB) | scalar | Integer32 | .1.3.6.1.4.1.351.150.24.1.1.4.9 |