seqToneDurationOfEachTone

CISCO-WAN-VISM-TONE-PLAN-MIB · .1.3.6.1.4.1.351.150.24.1.1.4.3
MIB view Table view

Object

scalar r/w Integer32 
Nominal tone duration of each single tone in counts of 10ms
used with sequential tone detector on VISM DSP.

Context

MIB
CISCO-WAN-VISM-TONE-PLAN-MIB
OID
.1.3.6.1.4.1.351.150.24.1.1.4.3
Type
scalar
Access
readwrite
Status
current
Parent
vismSequentialToneDetectGrp
Siblings
19

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-65534

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
seqToneNumOfFrequencies
The number of single frequencies which have to be detected by the sequential tone detector command on VISM. The frequencies should specified below (seqToneFrequency1 to seqToneF…
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.1
seqTonePowerLevelFloor
Lowest (floor) power level of the sequential frequency tone (absolute value in dBm) used with sequential tone detector on VISM DSP. Range from 0 to 40 (0 to -40dB)
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.10
seqToneFrequency1
1st frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.11
seqToneFrequency2
2nd frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.12
seqToneFrequency3
3rd frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.13
seqToneFrequency4
4th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.14
seqToneFrequency5
5th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.15
seqToneFrequency6
6th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.16
seqToneFrequency7
7th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.17
seqToneFrequency8
8th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.18
seqToneFrequency9
9th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.19
seqToneEventID
The eventID corresponding to the sequential frequency. Currently only supports Event 74 (SIT tone)
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.2
seqToneFrequency10
10th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.20
seqToneGapBetweenEachTone
Nominal silence gap duration between each tone in 10ms used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.4
seqToneDurationDeviation
Tone duration deviation allowed in 10ms used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.5
seqToneMaximumGapDuration
Maximum tone duration allowed in 10ms used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.6
seqToneGapDurationDeviation
Tone duration deviation allowed in 10ms used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.7
seqToneFreqDeviation
Frequency deviation allowed (1 - 1000 Hz) used with sequential tone detector on VISM DSP.
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.8
seqTonePowerLevelCeiling
Maximum ceiling power level of the sequential frequency tone (absolute value in dBm) used with sequential tone detector on VISM DSP. Range from 0 to 40 (0 to -40dB)
scalarInteger32.1.3.6.1.4.1.351.150.24.1.1.4.9