cvaIfEMTimingDelayVoice
CISCO-VOICE-ANALOG-IF-MIB ·
.1.3.6.1.4.1.9.9.62.1.2.3.1.15
Object
column
r/w
milliseconds Integer32
This object is relevant to how long DSP will delay sending the voice packet to the LMR port.
Context
- MIB
- CISCO-VOICE-ANALOG-IF-MIB
- OID
.1.3.6.1.4.1.9.9.62.1.2.3.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- cvaIfEMTimingEntry
- Table
- cvaIfEMTimingTable
- Siblings
- 14
Syntax
milliseconds Integer32
Values & Constraints
Object Constraints
range: 0-1500
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cvaIfEMTimingDigitDuration Outgoing DTMF digit duration in milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.1 |
| cvaIfEMTimingMinDelayPulseWidth Minimum delay-dial pulse duration for incoming call.
If the value of this object is 0, then no delay-dial
is sent to the far end for the incoming call. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.10 |
| cvaIfEMTimingVoiceHangover The hangover time used to determine the casethere is
no more voice packet arrived. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.11 |
| cvaIfEMTimeoutLmrTeardown LMR port tear down timeout.
This object is relevant to the waiting time of
teardown call on LMR port.
if the value of this object is '-1', then the timeout
is disable. | column | seconds Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.12 |
| cvaIfEMTimeoutPttXmt This object signifies LMR port maxinum transmit time.
This object is relevant to how long LMR port can
continue transmit voice packet without pause. | column | minutes Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.13 |
| cvaIfEMTimeoutPttRcv This object signifies LMR port maxinum receive time.
This object is relevant to how long LMR port can
continue receive voice packet without pause. | column | minutes Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.14 |
| cvaIfEMTimingInterDigitDuration Outgoing DTMF inter-digit duration in milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.2 |
| cvaIfEMTimingPulseRate Outgoing pulse dialing rate in pulses per second (pps). | column | pulses per second Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.3 |
| cvaIfEMTimingPulseInterDigitDuration Outgoing Pulse dialing inter-digit timing in
milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.4 |
| cvaIfEMTimingClearWaitDuration Time of Inactive seizure signal to declare call cleared. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.5 |
| cvaIfEMTimingMaxWinkWaitDuration Maximum time to wait from the outgoing seizure of the line
to the time of sending out a wink-pulse. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.6 |
| cvaIfEMTimingMaxWinkDuration Maximum outgoing wink duration (between the wink-pulse leading
edge and trailing edge) for wink start signaling. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.7 |
| cvaIfEMTimingDelayStart Minimum time to wait from outgoing seizure to
out-dialing digits for delay start signaling. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.8 |
| cvaIfEMTimingMaxDelayDuration Maximum time to wait from outgoing seizure to
out-dialing digits. If the far end does not allow to
send digits after the duration specified in the object,
a reorder tone will be s… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.62.1.2.3.1.9 |