cvapSvcMultiCIDTerminatDelTimer
CISCO-VOICE-AALX-PROFILE-MIB ·
.1.3.6.1.4.1.9.9.323.1.3.1.1.17
Object
column
r/w
seconds Unsigned32
This object specifies the time that the Terminating end can attempt to add a new CID into the Terminated-SVC after the last CID in a slave-end SVC is deleted. The interval of this object should be 5. The 'cvapSvcMultiCIDOriginatDelTimer' must be greater than or equal to 'cvapSvcMultiCIDTerminatDelTimer+5', except for the case that 'cvapSvcMultiCIDOriginatDelTimer' is 0 and 'cvapSvcMultiCIDTerminatDelTimer' is 0 (which means that the Delete Timer feature is disabled).
Context
- MIB
- CISCO-VOICE-AALX-PROFILE-MIB
- OID
.1.3.6.1.4.1.9.9.323.1.3.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- cvapSvcConfigEntry
- Table
- cvapSvcConfigTable
- Siblings
- 17
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 0-1195
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cvapSvcAtmQosCellDelay This object identifies end-to-end cell delay
in voice SVC establishment.
It is used to guarantee the quality of the route selected
for a voice SVC.
It is applicable to both AAL… | column | microseconds Integer32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.1 |
| cvapSvcH248SelectorByteValue This object specifies the selector byte value of the NSAP
address for H.248 protocol.
When a SVC call setup indication from the network is received,
it will look at this object t… | column | Integer32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.10 |
| cvapSvcDelNotifGuardTimer A timer, for a duration as specified by this object,
will be started when the SVC call is released from the
network side. Upon expiration of this timer, the call
agent is notif… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.11 |
| cvapSvcMultiCIDPerSvc This object enables the user to disable or enable the
Multi-CID SVC feature on the gateway.
When this object is set to 'true', multiple CIDs can be
established on a single SVC. W… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.323.1.3.1.1.12 |
| cvapSvcMultiCIDFillTimer This object defines the time (millisecs) to wait for filling
up the cell when the next packet is not ready. After waiting
for the time configured in this object, the cell will be… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.13 |
| cvapSvcMultiCIDCACSCR This object specifies the SCR (Sustained Cell Rate) per
Multi-CID SVC.
The value of this object will be used for CAC (Call Admission
Control) processing, and will determine if a n… | column | Cells per Second Unsigned32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.14 |
| cvapSvcMultiCIDCACPCR This object specifies the PCR (Peak Cell Rate) per Multi-CID
SVC.
The value of this object will be used for CAC (Call Admission
Control) processing, and will determine whether a… | column | Cells per Second Unsigned32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.15 |
| cvapSvcMultiCIDOriginatDelTimer This object specifies the time to wait to delete an Originated
-SVC in the case where a CID delete just occurred and the SVC
has no more CIDs after the deletion.
The interval of… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.16 |
| cvapSvcMultiCIDGlareThreshold This object specifies the threshold at when reached
on the SVC-Terminating end, that no more CID's can
be added to that Terminated-SVC from the Termination
end. The Originating e… | column | number of CIDs Unsigned32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.18 |
| cvapSvcAtmQosCtd This object identifies end-to-end maximum cell transfer
in voice SVC establishment.
It is used to guarantee the quality of the route
selected for a voice SVC.
It is applicable… | column | microseconds Integer32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.2 |
| cvapSvcAtmQosClr This object identifies maximum Cell Loss Ratio (CLR)
in voice SVC establishment.
It is used to guarantee the quality of the route selected
for a voice SVC.
It is applicable to b… | column | Integer32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.3 |
| cvapSvcTrfScalingFactor This object specifies Traffic Scaling Factor
in computing factored bandwidth which is used in ATM
signaling in voice SVC establishment.
When this value is less than 100 it can … | column | Integer32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.4 |
| cvapSvcAal2CidNumber This object specifies the default AAL2 CID (Channel
Identification) number used for AAL2 SVC connections.
0-7 is reserved. | column | Integer32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.5 |
| cvapSvcAggTrafficClipping This object defines the aggregate traffic clipping policy.
This object specifies if the aggregate traffic clipping
policy is applicable to all bearer traffic generated in the
me… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.323.1.3.1.1.6 |
| cvapSvcAggLinkState This object provides the state of the SVC link between PNNI
controller and the media gateway.
When the SVC software module fails to register NSAP address
with the PNNI controller… | column | Enumeration | .1.3.6.1.4.1.9.9.323.1.3.1.1.7 |
| cvapSvcPartialFillSupported This object indicates the fill level of cells in case of
AAL1 adaptation .
The value of this object will be used if the call agent does
not specify partial fill in… | column | Integer32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.8 |
| cvapSvcMgcpSelectorByteValue This object specifies the selector byte value of the NSAP
address for MGCP protocol.
When a SVC call setup indication from the network is received,
it will look at this object to… | column | Integer32 | .1.3.6.1.4.1.9.9.323.1.3.1.1.9 |