cvapSvcConfigEntry

CISCO-VOICE-AALX-PROFILE-MIB · .1.3.6.1.4.1.9.9.323.1.3.1.1

Object

row

An entry containing management information for SVC connection 
in the media gateway.  
An entry of this table is created when a new media gateway is 
detected by media gateway application.
The entry is deleted when the media gateway is removed from 
the system.

Context

MIB: CISCO-VOICE-AALX-PROFILE-MIB
OID: .1.3.6.1.4.1.9.9.323.1.3.1.1
Type: row
Status: current
Parent: cvapSvcConfigTable
Table: cvapSvcConfigTable
Children: 18

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
cvapSvcAtmQosCellDelay This object identifies end-to-end cell delay in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. It is applicable to both AAL…	column	microseconds Integer32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.1`
cvapSvcH248SelectorByteValue This object specifies the selector byte value of the NSAP address for H.248 protocol. When a SVC call setup indication from the network is received, it will look at this object t…	column	Integer32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.10`
cvapSvcDelNotifGuardTimer A timer, for a duration as specified by this object, will be started when the SVC call is released from the network side. Upon expiration of this timer, the call agent is notif…	column	seconds Integer32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.11`
cvapSvcMultiCIDPerSvc This object enables the user to disable or enable the Multi-CID SVC feature on the gateway. When this object is set to 'true', multiple CIDs can be established on a single SVC. W…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.323.1.3.1.1.12`
cvapSvcMultiCIDFillTimer This object defines the time (millisecs) to wait for filling up the cell when the next packet is not ready. After waiting for the time configured in this object, the cell will be…	column	milliseconds Unsigned32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.13`
cvapSvcMultiCIDCACSCR This object specifies the SCR (Sustained Cell Rate) per Multi-CID SVC. The value of this object will be used for CAC (Call Admission Control) processing, and will determine if a n…	column	Cells per Second Unsigned32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.14`
cvapSvcMultiCIDCACPCR This object specifies the PCR (Peak Cell Rate) per Multi-CID SVC. The value of this object will be used for CAC (Call Admission Control) processing, and will determine whether a…	column	Cells per Second Unsigned32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.15`
cvapSvcMultiCIDOriginatDelTimer This object specifies the time to wait to delete an Originated -SVC in the case where a CID delete just occurred and the SVC has no more CIDs after the deletion. The interval of…	column	seconds Unsigned32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.16`
cvapSvcMultiCIDTerminatDelTimer This object specifies the time that the Terminating end can attempt to add a new CID into the Terminated-SVC after the last CID in a slave-end SVC is deleted. The interval of t…	column	seconds Unsigned32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.17`
cvapSvcMultiCIDGlareThreshold This object specifies the threshold at when reached on the SVC-Terminating end, that no more CID's can be added to that Terminated-SVC from the Termination end. The Originating e…	column	number of CIDs Unsigned32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.18`
cvapSvcAtmQosCtd This object identifies end-to-end maximum cell transfer in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. It is applicable…	column	microseconds Integer32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.2`
cvapSvcAtmQosClr This object identifies maximum Cell Loss Ratio (CLR) in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. It is applicable to b…	column	Integer32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.3`
cvapSvcTrfScalingFactor This object specifies Traffic Scaling Factor in computing factored bandwidth which is used in ATM signaling in voice SVC establishment. When this value is less than 100 it can …	column	Integer32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.4`
cvapSvcAal2CidNumber This object specifies the default AAL2 CID (Channel Identification) number used for AAL2 SVC connections. 0-7 is reserved.	column	Integer32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.5`
cvapSvcAggTrafficClipping This object defines the aggregate traffic clipping policy. This object specifies if the aggregate traffic clipping policy is applicable to all bearer traffic generated in the me…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.323.1.3.1.1.6`
cvapSvcAggLinkState This object provides the state of the SVC link between PNNI controller and the media gateway. When the SVC software module fails to register NSAP address with the PNNI controller…	column	Enumeration	`.1.3.6.1.4.1.9.9.323.1.3.1.1.7`
cvapSvcPartialFillSupported This object indicates the fill level of cells in case of AAL1 adaptation . The value of this object will be used if the call agent does not specify partial fill in…	column	Integer32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.8`
cvapSvcMgcpSelectorByteValue This object specifies the selector byte value of the NSAP address for MGCP protocol. When a SVC call setup indication from the network is received, it will look at this object to…	column	Integer32	`.1.3.6.1.4.1.9.9.323.1.3.1.1.9`

Indexes