vismChanCarrierLossPolicy
CISCO-VISM-CAC-MIB ·
.1.3.6.1.4.1.351.110.5.5.3.1.3.1.6
Object
column
r/w
Enumeration
This object defines the policy that needs to be applied
when a carrier loss is detected. The possible policies
are defined as follows:
'previousCodec' - switch to the pre-upspeed codec when a
a carrier loss is detected.
'upspeedCodec' - remain with the upspeed codec when a
carrier loss is detected.
'unspecified' - The card level object value
vismCarrierLossPolicy(defined in
CISCO-VISM-MODULE-MIB MIB) will be used.
Configuring this object will not have any affect when
card level CAC object vismCacEnable (defined in
CISCO-VISM-MODULE-MIB MIB) is disabled.
Context
- MIB
- CISCO-VISM-CAC-MIB
- OID
.1.3.6.1.4.1.351.110.5.5.3.1.3.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vismChanCacEntry
- Table
- vismChanCacTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | previousCodec |
2 | upspeedCodec |
3 | unspecified |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vismChanNum This attribute defines the index for the vismChanCac Table.
The LCN(Logical channel number) number is the same as
the LCN value used as the index for the vismChanCnfGrpTable
(de… | column | Integer32 | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.1 |
| vismChanCacMaster This attribute defines whether the PVC is the master end
or slave end. CAC functionality is applied only at the master
end of the PVC. It is not necessary if the PVC end is confi… | column | Enumeration | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.2 |
| vismChanCacPassedCons This attribute defines the count of connections that
passed successfully the CAC function. CAC functionality is
applied either due to
1) The CRCX message sent to VISM from the Cal… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.3 |
| vismChanCacRejectedCons This attribute defines the count of connections that
got rejected due to CAC function. The CAC rejection was
due to the bandwidth not being available on a given PVC. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.4 |
| vismChanCacRejectionPolicy This attribute defines the policy that needs to be applied
once the CAC function rejects the upspeeding of a connection,
due to a fax/modem switchover request. The applicable
opt… | column | Enumeration | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.5 |
| vismChanVADTolerance The value in this object refers to the customer accepted
drop rate for voice connections when the bandwidth usage
exceeds allowed value.
A value of zero ind… | column | 0.0001 percentage Integer32 | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.7 |
| vismChanVADDutyCycle This object refers to the talk-spurts duty cycle.
A value of zero indicates the card level object
vismVADDutyCycle(defined in CISCO-VISM-MODULE-MIB MIB)
value will … | column | 0.01 percentage Integer32 | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.8 |
| networkCacConfigState This attribute defines whether the originating and terminating
VISMs are configured properly or not, by default the
configuration is assumed to be 'ok' and this object is set
to '… | column | Enumeration | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.9 |