vismChanCacEntry
CISCO-VISM-CAC-MIB ·
.1.3.6.1.4.1.351.110.5.5.3.1.3.1
Object
row
Each entry in this table corresponds to a PVC, since the CAC functionality is applied on a per PVC basis. The bandwidth is allocated on a per PVC basis and the connection admission control is done by comparing the available bandwidth on a PVC with the required bandwidth as a result of new connection setup request or upspeed request.
Context
- MIB
- CISCO-VISM-CAC-MIB
- OID
.1.3.6.1.4.1.351.110.5.5.3.1.3.1- Type
- row
- Status
- current
- Parent
- vismChanCacTable
- Table
- vismChanCacTable
- Children
- 9
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vismChanNum This attribute defines the index for the vismChanCac Table.
The LCN(Logical channel number) number is the same as
the LCN value used as the index for the vismChanCnfGrpTable
(de… | column | Integer32 | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.1 |
| vismChanCacMaster This attribute defines whether the PVC is the master end
or slave end. CAC functionality is applied only at the master
end of the PVC. It is not necessary if the PVC end is confi… | column | Enumeration | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.2 |
| vismChanCacPassedCons This attribute defines the count of connections that
passed successfully the CAC function. CAC functionality is
applied either due to
1) The CRCX message sent to VISM from the Cal… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.3 |
| vismChanCacRejectedCons This attribute defines the count of connections that
got rejected due to CAC function. The CAC rejection was
due to the bandwidth not being available on a given PVC. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.4 |
| vismChanCacRejectionPolicy This attribute defines the policy that needs to be applied
once the CAC function rejects the upspeeding of a connection,
due to a fax/modem switchover request. The applicable
opt… | column | Enumeration | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.5 |
| vismChanCarrierLossPolicy This object defines the policy that needs to be applied
when a carrier loss is detected. The possible policies
are defined as follows:
'previousCodec' - switch t… | column | Enumeration | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.6 |
| vismChanVADTolerance The value in this object refers to the customer accepted
drop rate for voice connections when the bandwidth usage
exceeds allowed value.
A value of zero ind… | column | 0.0001 percentage Integer32 | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.7 |
| vismChanVADDutyCycle This object refers to the talk-spurts duty cycle.
A value of zero indicates the card level object
vismVADDutyCycle(defined in CISCO-VISM-MODULE-MIB MIB)
value will … | column | 0.01 percentage Integer32 | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.8 |
| networkCacConfigState This attribute defines whether the originating and terminating
VISMs are configured properly or not, by default the
configuration is assumed to be 'ok' and this object is set
to '… | column | Enumeration | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| vismChanNum This attribute defines the index for the vismChanCac Table.
The LCN(Logical channel number) number is the same as
the LCN value used as the index for the vismChanCnfGrpTable
(de… | column | Integer32 | .1.3.6.1.4.1.351.110.5.5.3.1.3.1.1 |