brouterEnableTransitEncapsulation
CISCO-STACK-MIB ·
.1.3.6.1.4.1.9.5.1.6.16
Object
scalar
r/w
Enumeration
Indicates whether Ethernet packets are encapsulated on FDDI via transit encapsulation protocol. Normally this option would be disabled to allow translational bridging between Ethernet and FDDI to take place.
Context
- MIB
- CISCO-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.1.6.16- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- brouterGrp
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brouterEnableRip Indicates whether the RIP protocol is enabled. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.1 |
| brouterEthernetReceiveMax Maximum number of Ethernet receive buffers
processed at one time per port. | scalar | Integer32 | .1.3.6.1.4.1.9.5.1.6.10 |
| brouterEthernetTransmitMax Maximum number of Ethernet transmit buffers
processed at one time per port. | scalar | Integer32 | .1.3.6.1.4.1.9.5.1.6.11 |
| brouterFddiReceiveMax Maximum number of FDDI receive buffers processed
at one time per port. | scalar | Integer32 | .1.3.6.1.4.1.9.5.1.6.12 |
| brouterFddiTransmitMax Maximum number of FDDI transmit buffers processed
at one time per port. | scalar | Integer32 | .1.3.6.1.4.1.9.5.1.6.13 |
| brouterPortTable A list of brouter port entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each
module. | table | - | .1.3.6.1.4.1.9.5.1.6.14 |
| brouterIpx8022ToEther The default translation for IPX packets when
bridging from FDDI 802.2 to Ethernet. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.15 |
| brouterEnableFddiCheck Indicates whether MAC addresses learned one side
of a translational bridge should not be allowed to
be learned on the other side of the bridge. The
presence certain misbehaving de… | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.17 |
| brouterEnableAPaRT Indicates whether the Automatic Packet
Recognition and Translation feature is enabled on
translational bridge(s) in the box. If APaRT is
disabled, the default translations as defi… | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.18 |
| brouterEnableSpantree Indicates if Spanning Tree protocol is enabled. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.2 |
| brouterEnableGiantCheck Indicates whether special handling of giant
packets is enabled. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.3 |
| brouterEnableIpFragmentation Indicates whether IP fragmentation is enabled. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.4 |
| brouterEnableUnreachables Indicates whether ICMP unreachable messages are
sent by the system. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.5 |
| brouterCamAgingTime deprecated The aging time for the CAM table. This duplicate
item is the same value as dot1dTpAgingTime. | scalar | Integer32 | .1.3.6.1.4.1.9.5.1.6.6 |
| brouterCamMode Mode in which the CAM module is operating. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.7 |
| brouterIpxSnapToEther The default translation for IPX packets when
bridging from FDDI SNAP to Ethernet. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.8 |
| brouterIpx8023RawToFddi The default translation for IPX packets when
bridging from Ethernet 802.3 Raw to FDDI. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.9 |