brouterCamAgingTime
CISCO-STACK-MIB ·
.1.3.6.1.4.1.9.5.1.6.6
Object
scalar
deprecated
r/w
Integer32
The aging time for the CAM table. This duplicate item is the same value as dot1dTpAgingTime.
Context
- MIB
- CISCO-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.1.6.6- Type
- scalar
- Access
- readwrite
- Status
- deprecated
- Parent
- brouterGrp
- Siblings
- 17
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-1000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brouterEnableRip Indicates whether the RIP protocol is enabled. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.1 |
| brouterEthernetReceiveMax Maximum number of Ethernet receive buffers
processed at one time per port. | scalar | Integer32 | .1.3.6.1.4.1.9.5.1.6.10 |
| brouterEthernetTransmitMax Maximum number of Ethernet transmit buffers
processed at one time per port. | scalar | Integer32 | .1.3.6.1.4.1.9.5.1.6.11 |
| brouterFddiReceiveMax Maximum number of FDDI receive buffers processed
at one time per port. | scalar | Integer32 | .1.3.6.1.4.1.9.5.1.6.12 |
| brouterFddiTransmitMax Maximum number of FDDI transmit buffers processed
at one time per port. | scalar | Integer32 | .1.3.6.1.4.1.9.5.1.6.13 |
| brouterPortTable A list of brouter port entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each
module. | table | - | .1.3.6.1.4.1.9.5.1.6.14 |
| brouterIpx8022ToEther The default translation for IPX packets when
bridging from FDDI 802.2 to Ethernet. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.15 |
| brouterEnableTransitEncapsulation Indicates whether Ethernet packets are
encapsulated on FDDI via transit encapsulation
protocol. Normally this option would be disabled
to allow translational bridging between Ethe… | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.16 |
| brouterEnableFddiCheck Indicates whether MAC addresses learned one side
of a translational bridge should not be allowed to
be learned on the other side of the bridge. The
presence certain misbehaving de… | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.17 |
| brouterEnableAPaRT Indicates whether the Automatic Packet
Recognition and Translation feature is enabled on
translational bridge(s) in the box. If APaRT is
disabled, the default translations as defi… | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.18 |
| brouterEnableSpantree Indicates if Spanning Tree protocol is enabled. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.2 |
| brouterEnableGiantCheck Indicates whether special handling of giant
packets is enabled. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.3 |
| brouterEnableIpFragmentation Indicates whether IP fragmentation is enabled. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.4 |
| brouterEnableUnreachables Indicates whether ICMP unreachable messages are
sent by the system. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.5 |
| brouterCamMode Mode in which the CAM module is operating. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.7 |
| brouterIpxSnapToEther The default translation for IPX packets when
bridging from FDDI SNAP to Ethernet. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.8 |
| brouterIpx8023RawToFddi The default translation for IPX packets when
bridging from Ethernet 802.3 Raw to FDDI. | scalar | Enumeration | .1.3.6.1.4.1.9.5.1.6.9 |