cOpticalParamAlarmStatus
CISCO-OPTICAL-MONITOR-MIB ·
.1.3.6.1.4.1.9.9.264.1.1.1.1.13
Object
column
OpticalAlarmStatus
This object is used to indicate the current status of
the thresholds for the monitored optical parameter
on the interface.
If a threshold is currently being exceeded on the
interface, the corresponding bit in this object will be set
to 1. Otherwise, the bit will be set to 0.
Context
- MIB
- CISCO-OPTICAL-MONITOR-MIB
- OID
.1.3.6.1.4.1.9.9.264.1.1.1.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cOpticalMonEntry
- Table
- cOpticalMonTable
- Siblings
- 18
Syntax
OpticalAlarmStatus
- Source
- OpticalAlarmStatus
- Base type
OctetString
Values & Constraints
Type Constraints
range: 1
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cOpticalMonDirection This object indicates the direction monitored for the
optical interface, in this entry. | column | OpticalIfDirection | .1.3.6.1.4.1.9.9.264.1.1.1.1.1 |
| cOpticalParamLowAlarmSev This object is used to specify a severity level associated
with the low alarm threshold given by the
cOpticalParamLowAlarmThresh object. The values 'notAlarmed',
'notReported', an… | column | OpticalAlarmSeverity | .1.3.6.1.4.1.9.9.264.1.1.1.1.10 |
| cOpticalParamLowWarningThresh This object is used to set a low warning threshold on
the optical parameter being monitored.
A threshold crossing condition will be indicated if the value
given by … | column | OpticalParameterValue | .1.3.6.1.4.1.9.9.264.1.1.1.1.11 |
| cOpticalParamLowWarningSev This object is used to specify a severity level associated
with the low warning threshold given by the
cOpticalParamLowWarningThresh object. The values 'critical',
'major', and 'c… | column | OpticalAlarmSeverity | .1.3.6.1.4.1.9.9.264.1.1.1.1.12 |
| cOpticalParamAlarmCurMaxThresh This object indicates the threshold value of the highest
severity threshold that is currently being exceeded
on the interface, for the optical parameter.
If no threshold value is … | column | OpticalParameterValue | .1.3.6.1.4.1.9.9.264.1.1.1.1.14 |
| cOpticalParamAlarmCurMaxSev This object indicates the maximum severity of any thresholds
that are currently being exceeded on the interface, for the
optical parameter. | column | OpticalAlarmSeverity | .1.3.6.1.4.1.9.9.264.1.1.1.1.15 |
| cOpticalParamAlarmLastChange This object specifies the value of sysUpTime at the last time
a threshold related to a particular optical parameter was
exceeded or cleared on the interface. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.264.1.1.1.1.16 |
| cOpticalMon15MinValidIntervals This object gives the number of previous 15 minute
intervals for which valid performance monitoring data
has been stored on the interface.
The value of this object … | column | Unsigned32 | .1.3.6.1.4.1.9.9.264.1.1.1.1.17 |
| cOpticalMon24HrValidIntervals This object gives the number of previous 24 hour
intervals for which valid performance monitoring data
has been stored on the interface.
The value of this object wi… | column | Unsigned32 | .1.3.6.1.4.1.9.9.264.1.1.1.1.18 |
| cOpticalParamThreshSource This object indicates if the current value of a particular
threshold in this entry is user configured value or it is
a system default value. It also allows user to specify
the l… | column | Bits | .1.3.6.1.4.1.9.9.264.1.1.1.1.19 |
| cOpticalMonLocation This object indicates whether the optical characteristics are
measured before or after adjustment (e.g. optical amplification
or attenuation), at this interface. | column | OpticalIfMonLocation | .1.3.6.1.4.1.9.9.264.1.1.1.1.2 |
| cOpticalMonParameterType This object specifies the optical parameter that is being
monitored in this entry. | column | OpticalParameterType | .1.3.6.1.4.1.9.9.264.1.1.1.1.3 |
| cOpticalParameterValue This object gives the value measured for the particular
optical parameter specified by the cOpticalMonParameterType
object. | column | OpticalParameterValue | .1.3.6.1.4.1.9.9.264.1.1.1.1.4 |
| cOpticalParamHighAlarmThresh This object is used to set a high alarm threshold on the
optical parameter being monitored.
An alarm condition will be raised if the value given by
cOpticalParamete… | column | OpticalParameterValue | .1.3.6.1.4.1.9.9.264.1.1.1.1.5 |
| cOpticalParamHighAlarmSev This object is used to specify a severity level associated
with the high alarm threshold given by the
cOpticalParamHighAlarmThresh object. The values 'notAlarmed',
'notReported', … | column | OpticalAlarmSeverity | .1.3.6.1.4.1.9.9.264.1.1.1.1.6 |
| cOpticalParamHighWarningThresh This object is used to set a high warning threshold on
the optical parameter being monitored.
A threshold crossing condition will be indicated if the value
given by… | column | OpticalParameterValue | .1.3.6.1.4.1.9.9.264.1.1.1.1.7 |
| cOpticalParamHighWarningSev This object is used to specify a severity level associated
with the high warning threshold given by the
cOpticalParamHighWarningThresh object. The values 'critical',
'major', and … | column | OpticalAlarmSeverity | .1.3.6.1.4.1.9.9.264.1.1.1.1.8 |
| cOpticalParamLowAlarmThresh This object is used to set a low alarm threshold on the
optical parameter being monitored.
An alarm condition will be raised if the value given by
cOpticalParameter… | column | OpticalParameterValue | .1.3.6.1.4.1.9.9.264.1.1.1.1.9 |