cOpticalPMIntervalEntry
CISCO-OPTICAL-MONITOR-MIB ·
.1.3.6.1.4.1.9.9.264.1.2.2.1
Object
row
An entry in the cOpticalPMIntervalTable. It contains
performance monitoring data for an optical parameter,
collected over a previous interval.
Note that the set of monitored optical parameters may vary
based on interface type, direction, and monitoring location.
Examples of interfaces that can have an entry in this table
include optical transceivers, interfaces before and after
optical amplifiers, and interfaces before and after optical
attenuators.
Context
- MIB
- CISCO-OPTICAL-MONITOR-MIB
- OID
.1.3.6.1.4.1.9.9.264.1.2.2.1- Type
- row
- Status
- current
- Parent
- cOpticalPMIntervalTable
- Table
- cOpticalPMIntervalTable
- Children
- 9
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cOpticalPMIntervalPeriod This object indicates whether the optical parameter values,
given in this entry, are collected over a period of 15 minutes
or 24 hours. | column | OpticalPMPeriod | .1.3.6.1.4.1.9.9.264.1.2.2.1.1 |
| cOpticalPMIntervalNumber A number between 1 and 96, which identifies the
interval for which the set of optical parameter values is
available. The interval identified by 1 is the most recently
completed 15… | column | Integer32 | .1.3.6.1.4.1.9.9.264.1.2.2.1.2 |
| cOpticalPMIntervalDirection This object indicates the direction monitored for the optical
interface, in this entry. | column | OpticalIfDirection | .1.3.6.1.4.1.9.9.264.1.2.2.1.3 |
| cOpticalPMIntervalLocation This object indicates whether the optical characteristics
are measured before or after adjustment (e.g.
optical amplification or attenuation), at this interface. | column | OpticalIfMonLocation | .1.3.6.1.4.1.9.9.264.1.2.2.1.4 |
| cOpticalPMIntervalParamType This object specifies the optical parameter that is being
monitored, in this entry. | column | OpticalParameterType | .1.3.6.1.4.1.9.9.264.1.2.2.1.5 |
| cOpticalPMIntervalMaxParam This object gives the maximum value measured for the optical
parameter, in a particular 15 minute or 24 hour interval. | column | OpticalParameterValue | .1.3.6.1.4.1.9.9.264.1.2.2.1.6 |
| cOpticalPMIntervalMinParam This object gives the minimum value measured for the optical
parameter, in a particular 15 minute or 24 hour interval. | column | OpticalParameterValue | .1.3.6.1.4.1.9.9.264.1.2.2.1.7 |
| cOpticalPMIntervalMeanParam This object gives the average value of the measured optical
parameter, in a particular 15 minute or 24 hour interval. | column | OpticalParameterValue | .1.3.6.1.4.1.9.9.264.1.2.2.1.8 |
| cOpticalPMIntervalUnavailSecs This object is used to indicate the number of seconds,
in the particular 15 minute or 24 hour interval, for which the
optical performance data is not accounted for.
… | column | Integer32 | .1.3.6.1.4.1.9.9.264.1.2.2.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| cOpticalPMIntervalPeriod This object indicates whether the optical parameter values,
given in this entry, are collected over a period of 15 minutes
or 24 hours. | column | OpticalPMPeriod | .1.3.6.1.4.1.9.9.264.1.2.2.1.1 |
| cOpticalPMIntervalNumber A number between 1 and 96, which identifies the
interval for which the set of optical parameter values is
available. The interval identified by 1 is the most recently
completed 15… | column | Integer32 | .1.3.6.1.4.1.9.9.264.1.2.2.1.2 |
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| cOpticalPMIntervalDirection This object indicates the direction monitored for the optical
interface, in this entry. | column | OpticalIfDirection | .1.3.6.1.4.1.9.9.264.1.2.2.1.3 |
| cOpticalPMIntervalLocation This object indicates whether the optical characteristics
are measured before or after adjustment (e.g.
optical amplification or attenuation), at this interface. | column | OpticalIfMonLocation | .1.3.6.1.4.1.9.9.264.1.2.2.1.4 |
| cOpticalPMIntervalParamType This object specifies the optical parameter that is being
monitored, in this entry. | column | OpticalParameterType | .1.3.6.1.4.1.9.9.264.1.2.2.1.5 |