cOpticalPMCurrentEntry
CISCO-OPTICAL-MONITOR-MIB ·
.1.3.6.1.4.1.9.9.264.1.2.1.1
Object
row
An entry in the cOpticalPMCurrentTable. It contains
performance monitoring data for a monitored optical
parameter at an interface, collected over the current 15
minute or the current 24 hour interval.
Note that the set of monitored optical parameters may vary
based on interface type, direction, and monitoring location.
Examples of interfaces that can have an entry in this table
include optical transceivers, interfaces before and after
optical amplifiers, and interfaces before and after optical
attenuators.
Context
- MIB
- CISCO-OPTICAL-MONITOR-MIB
- OID
.1.3.6.1.4.1.9.9.264.1.2.1.1- Type
- row
- Status
- current
- Parent
- cOpticalPMCurrentTable
- Table
- cOpticalPMCurrentTable
- Children
- 8
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cOpticalPMCurrentPeriod This object indicates whether the optical parameter values
given in this entry are collected over the current 15 minute or
the current 24 hour interval. | column | OpticalPMPeriod | .1.3.6.1.4.1.9.9.264.1.2.1.1.1 |
| cOpticalPMCurrentDirection This object indicates the direction monitored for the optical
interface, in this entry. | column | OpticalIfDirection | .1.3.6.1.4.1.9.9.264.1.2.1.1.2 |
| cOpticalPMCurrentLocation This object indicates whether the optical characteristics are
measured before or after adjustment (e.g. optical amplification
or attenuation), at this interface. | column | OpticalIfMonLocation | .1.3.6.1.4.1.9.9.264.1.2.1.1.3 |
| cOpticalPMCurrentParamType This object specifies the optical parameter that is being
monitored, in this entry. | column | OpticalParameterType | .1.3.6.1.4.1.9.9.264.1.2.1.1.4 |
| cOpticalPMCurrentMaxParam This object gives the maximum value measured for the monitored
optical parameter, in the current 15 minute or the current
24 hour interval. | column | OpticalParameterValue | .1.3.6.1.4.1.9.9.264.1.2.1.1.5 |
| cOpticalPMCurrentMinParam This object gives the minimum value measured for the monitored
optical parameter, in the current 15 minute or the current
24 hour interval. | column | OpticalParameterValue | .1.3.6.1.4.1.9.9.264.1.2.1.1.6 |
| cOpticalPMCurrentMeanParam This object gives the average value of the monitored
optical parameter, in the current 15 minute or the current
24 hour interval. | column | OpticalParameterValue | .1.3.6.1.4.1.9.9.264.1.2.1.1.7 |
| cOpticalPMCurrentUnavailSecs This object is used to indicate the number of seconds,
in the current 15 minute or the current 24 hour interval, for
which the optical performance data is not accounted for.
… | column | Integer32 | .1.3.6.1.4.1.9.9.264.1.2.1.1.8 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| cOpticalPMCurrentPeriod This object indicates whether the optical parameter values
given in this entry are collected over the current 15 minute or
the current 24 hour interval. | column | OpticalPMPeriod | .1.3.6.1.4.1.9.9.264.1.2.1.1.1 |
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| cOpticalPMCurrentDirection This object indicates the direction monitored for the optical
interface, in this entry. | column | OpticalIfDirection | .1.3.6.1.4.1.9.9.264.1.2.1.1.2 |
| cOpticalPMCurrentLocation This object indicates whether the optical characteristics are
measured before or after adjustment (e.g. optical amplification
or attenuation), at this interface. | column | OpticalIfMonLocation | .1.3.6.1.4.1.9.9.264.1.2.1.1.3 |
| cOpticalPMCurrentParamType This object specifies the optical parameter that is being
monitored, in this entry. | column | OpticalParameterType | .1.3.6.1.4.1.9.9.264.1.2.1.1.4 |