cLReapAclRuleSourceIpAddress
CISCO-LWAPP-REAP-MIB ·
.1.3.6.1.4.1.9.9.517.1.4.2.1.4
Object
The object specifies source IP address of the ACL rule. It cab be any ipv4 source address. A value 0 implies any sourse address.
Context
- MIB
- CISCO-LWAPP-REAP-MIB
- OID
.1.3.6.1.4.1.9.9.517.1.4.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cLReapAclRuleEntry
- Table
- cLReapAclRuleTable
- Siblings
- 17
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLReapAclRuleIndex This object represents index of the ACL rule. This can
be updated to reset the sequence of the rules of an ACL. | column | Unsigned32 | .1.3.6.1.4.1.9.9.517.1.4.2.1.1 |
| cLReapAclRuleDestinationIpNetmask This object specifies destination IP netmask of the
ACL rule. A value '0' implies any destination mask. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.517.1.4.2.1.10 |
| cLReapAclRuleProtocol This object specifies protocol of the packet.
It can be either of the pre specified protocols like
TCP, UDP, ICMP, ESP, AH, GRE, IP, Ethernet Over IP,
OSPF or any number between … | column | Unsigned32 | .1.3.6.1.4.1.9.9.517.1.4.2.1.11 |
| cLReapAclRuleStartSourcePort This object specifies source port of the packet.
It can be either of the pre specified ports like HTTP,
HTTPS, Telnet, RADIUS etc or any number between 0 and
65535. A value 65536 … | column | Unsigned32 | .1.3.6.1.4.1.9.9.517.1.4.2.1.12 |
| cLReapAclRuleEndSourcePort This object specifies source port of the packet.
It can be either of the pre specified ports like HTTP,
HTTPS, Telnet, RADIUS etc or any number between 0 and
65535. A value 65536 … | column | Unsigned32 | .1.3.6.1.4.1.9.9.517.1.4.2.1.13 |
| cLReapAclRuleStartDestinationPort This object specifies destination port of the packet.
It can be either of the pre specified ports like HTTP,
HTTPS, Telnet, RADIUS etc or any number between 0 and
65535. A value 6… | column | Unsigned32 | .1.3.6.1.4.1.9.9.517.1.4.2.1.14 |
| cLReapAclRuleEndDestinationPort This object specifies destination port of the packet.
It can be either of the pre specified ports like HTTP,
HTTPS, Telnet, RADIUS etc or any number between 0 and
65535. A value 6… | column | Unsigned32 | .1.3.6.1.4.1.9.9.517.1.4.2.1.15 |
| cLReapAclRuleDscp This object specifies DSCP value of the rule.
A value 256 implies 'Any'. | column | Unsigned32 | .1.3.6.1.4.1.9.9.517.1.4.2.1.16 |
| cLReapAclNewRuleIndex This object specifies new index of the ACL rule.
This attribute should be updated if the requirement is
to reset the sequence of the rules of an ACL. A read
on this will yield t… | column | Unsigned32 | .1.3.6.1.4.1.9.9.517.1.4.2.1.17 |
| cLReapAclRuleRowStatus This object specifies row status of the ACL rule. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.517.1.4.2.1.18 |
| cLReapAclRuleAction This object specifies permission mode of the rule.
A value of 'deny' specifies client traffic matches
this rule will be blocked.
A value of 'permit' specifies client traffic match… | column | Enumeration | .1.3.6.1.4.1.9.9.517.1.4.2.1.2 |
| cLReapAclRuleSourceIpAddressType This object specifies source IP address type of
the ACL rule. The value is limited to ipv4 only. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.517.1.4.2.1.3 |
| cLReapAclRuleSourceIpNetmaskType This object specifies source IP netmask type of
the ACL rule. The value is limited to ipv4 only. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.517.1.4.2.1.5 |
| cLReapAclRuleSourceIpNetmask This object specifies source IP netmask of the
ACL rule. A value '0' implies any source mask. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.517.1.4.2.1.6 |
| cLReapAclRuleDestinationIpAddressType This object specifies destination IP address type of
the ACL rule. The value is limited to ipv4 only. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.517.1.4.2.1.7 |
| cLReapAclRuleDestinationIpAddress The object specifies destination IP address of the ACL
rule. It cab be any ipv4 source address. A value '0'
implies any destination address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.517.1.4.2.1.8 |
| cLReapAclRuleDestinationIpNetmaskType This object specifies destination IP netmask type of
the ACL rule. The value is limited to ipv4 only. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.517.1.4.2.1.9 |