cLQd11axVideoAdmCtrlSupport
CISCO-LWAPP-QOS-MIB ·
.1.3.6.1.4.1.9.9.524.1.21.4
Object
This object is used to enable or disable admission
control for video traffic flowing through the 802.11ax
interfaces in the controller.
When set to 'true', controller will reserve and manage
max-bandwidth (cLQd11axVideoMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11axVideoMaxRoamBandwidth) as per user
configured values.
When disabled, admission control will not be enforced.
This may delay video traffic depending on load on
the WLAN.
Context
- MIB
- CISCO-LWAPP-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.524.1.21.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cLQd11axCACConfig
- Siblings
- 16
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLQd11axVoiceAdmCtrlSupport This object is used to enable or disable admission
control for voice traffic flowing through the 802.11ax
interfaces in the controller.
When set to 'true', controller … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.1 |
| cLQd11axSipCacSupportEnable This object specifies whether SIP CAC is enabled.
A value of 'true' enables SIP CAC on dot11a radio band.
A value of 'false' disables SIP CAC on dot11a radio band. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.10 |
| cLQd11axMcastDirectEnable This object specifies the decision flag to allow multicast direct
stream on radio. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.11 |
| cLQd11axBestEffortAdmission This object specifies whether to admit a media stream in best
effort queue. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.12 |
| cLQd11axRedirectBestEffort This object specifies whether a unicast or multicast only video
stream can be redirected to best effort. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.13 |
| cLQd11axRadioMaxStreams This object specifies the maximum number of allowed streams per
radio for a 802.11ax band. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.524.1.21.14 |
| cLQd11axMaxMediaATPercent This object specifies the maximum allowed bandwidth for media
traffic. | scalar | Percent Integer32 | .1.3.6.1.4.1.9.9.524.1.21.15 |
| cLQd11axMinPhyRate This object specifies the minimum physical rate that should be
enabled by a client to successfully join a media stream. | scalar | CiscoLwappDot11aPhyRates | .1.3.6.1.4.1.9.9.524.1.21.16 |
| cLQd11axClientMaxStreams This object specifies the maximum number of allowed streams per
client for a 802.11ax band. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.17 |
| cLQd11axVoiceMaxAdmBandwidth This object denotes the maximum bandwidth
that can be allocated by controller for voice
traffic when admission control is enabled for
for 802.11ax interfaces in the controller.
… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.2 |
| cLQd11axVoiceMaxRoamBandwidth This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11axVoiceMaxAdmBandwidth, that can be
allocated to roaming clients for voice tra… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.3 |
| cLQd11axVideoMaxAdmBandwidth This object denotes the maximum bandwidth
that can be allocated by controller for video traffic
when admission control is enabled for 802.11ax
interfaces in the controller. When… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.5 |
| cLQd11axVideoMaxRoamBandwidth This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11aVideoMaxAdmBandwidth, that can be
allocated to roaming clients for video traf… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.6 |
| cLQd11axEdcaProfile This object specifies the EDCA profile to be used
in EDCA Parameter set element.
wmmDefault - WMM default standard parameters.
svpVoice - Spectralink voice priori… | scalar | Enumeration | .1.3.6.1.4.1.9.9.524.1.21.7 |
| cLQd11axVoiceCtrl This object specifies the parameters that
can be modified, when admission control is enabled.
loadBased - controller will reserve and manage
max-bandwidth and … | scalar | Enumeration | .1.3.6.1.4.1.9.9.524.1.21.8 |
| cLQd11axExpeditedBw This object specifies if expedited BW feature is
enabled or not.
A value of 'true' will ensure that the APs advertise
the expedited BW support in their beacons and
association re… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.9 |