cLQd11axCACConfig
CISCO-LWAPP-QOS-MIB ·
.1.3.6.1.4.1.9.9.524.1.21
Object
node
No description available.
Context
- MIB
- CISCO-LWAPP-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.524.1.21- Type
- node
- Parent
- ciscoLwappQosMIBObjects
- Siblings
- 18
- Children
- 17
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLQd11aCACConfig | node | - | .1.3.6.1.4.1.9.9.524.1.1 |
| cLQd11SipCacConfig | node | - | .1.3.6.1.4.1.9.9.524.1.10 |
| cLQMediaStreamConfig | node | - | .1.3.6.1.4.1.9.9.524.1.11 |
| cLQPreferredCallConfig | node | - | .1.3.6.1.4.1.9.9.524.1.12 |
| cLQConfigObjects | node | - | .1.3.6.1.4.1.9.9.524.1.13 |
| cLQoSProfileConfig | node | - | .1.3.6.1.4.1.9.9.524.1.14 |
| cLQoSSipSnoopingConfig | node | - | .1.3.6.1.4.1.9.9.524.1.15 |
| cLQoSAirTimeFairness | node | - | .1.3.6.1.4.1.9.9.524.1.16 |
| cLQd11bCACConfig | node | - | .1.3.6.1.4.1.9.9.524.1.2 |
| cLQCacThreshold | node | - | .1.3.6.1.4.1.9.9.524.1.22 |
| cLQCacStats | node | - | .1.3.6.1.4.1.9.9.524.1.23 |
| cLQd11GprConfig | node | - | .1.3.6.1.4.1.9.9.524.1.3 |
| cLQd11CACStats | node | - | .1.3.6.1.4.1.9.9.524.1.4 |
| cLQEntConfConfig | node | - | .1.3.6.1.4.1.9.9.524.1.5 |
| cLQd11VoiceStats | node | - | .1.3.6.1.4.1.9.9.524.1.6 |
| cLQVoiceWlanConfig | node | - | .1.3.6.1.4.1.9.9.524.1.7 |
| cLQVoiceClient | node | - | .1.3.6.1.4.1.9.9.524.1.8 |
| cLQMediaClient | node | - | .1.3.6.1.4.1.9.9.524.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLQd11axVoiceAdmCtrlSupport This object is used to enable or disable admission
control for voice traffic flowing through the 802.11ax
interfaces in the controller.
When set to 'true', controller … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.1 |
| cLQd11axSipCacSupportEnable This object specifies whether SIP CAC is enabled.
A value of 'true' enables SIP CAC on dot11a radio band.
A value of 'false' disables SIP CAC on dot11a radio band. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.10 |
| cLQd11axMcastDirectEnable This object specifies the decision flag to allow multicast direct
stream on radio. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.11 |
| cLQd11axBestEffortAdmission This object specifies whether to admit a media stream in best
effort queue. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.12 |
| cLQd11axRedirectBestEffort This object specifies whether a unicast or multicast only video
stream can be redirected to best effort. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.13 |
| cLQd11axRadioMaxStreams This object specifies the maximum number of allowed streams per
radio for a 802.11ax band. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.524.1.21.14 |
| cLQd11axMaxMediaATPercent This object specifies the maximum allowed bandwidth for media
traffic. | scalar | Percent Integer32 | .1.3.6.1.4.1.9.9.524.1.21.15 |
| cLQd11axMinPhyRate This object specifies the minimum physical rate that should be
enabled by a client to successfully join a media stream. | scalar | CiscoLwappDot11aPhyRates | .1.3.6.1.4.1.9.9.524.1.21.16 |
| cLQd11axClientMaxStreams This object specifies the maximum number of allowed streams per
client for a 802.11ax band. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.17 |
| cLQd11axVoiceMaxAdmBandwidth This object denotes the maximum bandwidth
that can be allocated by controller for voice
traffic when admission control is enabled for
for 802.11ax interfaces in the controller.
… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.2 |
| cLQd11axVoiceMaxRoamBandwidth This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11axVoiceMaxAdmBandwidth, that can be
allocated to roaming clients for voice tra… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.3 |
| cLQd11axVideoAdmCtrlSupport This object is used to enable or disable admission
control for video traffic flowing through the 802.11ax
interfaces in the controller.
When set to 'true', controller … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.4 |
| cLQd11axVideoMaxAdmBandwidth This object denotes the maximum bandwidth
that can be allocated by controller for video traffic
when admission control is enabled for 802.11ax
interfaces in the controller. When… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.5 |
| cLQd11axVideoMaxRoamBandwidth This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11aVideoMaxAdmBandwidth, that can be
allocated to roaming clients for video traf… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.6 |
| cLQd11axEdcaProfile This object specifies the EDCA profile to be used
in EDCA Parameter set element.
wmmDefault - WMM default standard parameters.
svpVoice - Spectralink voice priori… | scalar | Enumeration | .1.3.6.1.4.1.9.9.524.1.21.7 |
| cLQd11axVoiceCtrl This object specifies the parameters that
can be modified, when admission control is enabled.
loadBased - controller will reserve and manage
max-bandwidth and … | scalar | Enumeration | .1.3.6.1.4.1.9.9.524.1.21.8 |
| cLQd11axExpeditedBw This object specifies if expedited BW feature is
enabled or not.
A value of 'true' will ensure that the APs advertise
the expedited BW support in their beacons and
association re… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.9 |