cLQd11axMinPhyRate
CISCO-LWAPP-QOS-MIB ·
.1.3.6.1.4.1.9.9.524.1.21.16
Object
scalar
r/w
CiscoLwappDot11aPhyRates
This object specifies the minimum physical rate that should be enabled by a client to successfully join a media stream.
Context
- MIB
- CISCO-LWAPP-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.524.1.21.16- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cLQd11axCACConfig
- Siblings
- 16
Syntax
CiscoLwappDot11aPhyRates
- Source
- CiscoLwappDot11aPhyRates
- Base type
Enumeration
Values & Constraints
Type Values
6 | six |
9 | nine |
12 | twelve |
18 | eighteen |
24 | twentyFour |
36 | thirtySix |
48 | fortyEight |
54 | fiftyFour |
65 | sixtyFive |
72 | seventyTwoPointTwo |
130 | oneThirty |
135 | oneThirtyfive |
144 | oneFortyFourPointFour |
150 | oneFifty |
270 | twoSeventy |
300 | threeHundred |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLQd11axVoiceAdmCtrlSupport This object is used to enable or disable admission
control for voice traffic flowing through the 802.11ax
interfaces in the controller.
When set to 'true', controller … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.1 |
| cLQd11axSipCacSupportEnable This object specifies whether SIP CAC is enabled.
A value of 'true' enables SIP CAC on dot11a radio band.
A value of 'false' disables SIP CAC on dot11a radio band. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.10 |
| cLQd11axMcastDirectEnable This object specifies the decision flag to allow multicast direct
stream on radio. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.11 |
| cLQd11axBestEffortAdmission This object specifies whether to admit a media stream in best
effort queue. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.12 |
| cLQd11axRedirectBestEffort This object specifies whether a unicast or multicast only video
stream can be redirected to best effort. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.13 |
| cLQd11axRadioMaxStreams This object specifies the maximum number of allowed streams per
radio for a 802.11ax band. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.524.1.21.14 |
| cLQd11axMaxMediaATPercent This object specifies the maximum allowed bandwidth for media
traffic. | scalar | Percent Integer32 | .1.3.6.1.4.1.9.9.524.1.21.15 |
| cLQd11axClientMaxStreams This object specifies the maximum number of allowed streams per
client for a 802.11ax band. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.17 |
| cLQd11axVoiceMaxAdmBandwidth This object denotes the maximum bandwidth
that can be allocated by controller for voice
traffic when admission control is enabled for
for 802.11ax interfaces in the controller.
… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.2 |
| cLQd11axVoiceMaxRoamBandwidth This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11axVoiceMaxAdmBandwidth, that can be
allocated to roaming clients for voice tra… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.3 |
| cLQd11axVideoAdmCtrlSupport This object is used to enable or disable admission
control for video traffic flowing through the 802.11ax
interfaces in the controller.
When set to 'true', controller … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.4 |
| cLQd11axVideoMaxAdmBandwidth This object denotes the maximum bandwidth
that can be allocated by controller for video traffic
when admission control is enabled for 802.11ax
interfaces in the controller. When… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.5 |
| cLQd11axVideoMaxRoamBandwidth This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11aVideoMaxAdmBandwidth, that can be
allocated to roaming clients for video traf… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.21.6 |
| cLQd11axEdcaProfile This object specifies the EDCA profile to be used
in EDCA Parameter set element.
wmmDefault - WMM default standard parameters.
svpVoice - Spectralink voice priori… | scalar | Enumeration | .1.3.6.1.4.1.9.9.524.1.21.7 |
| cLQd11axVoiceCtrl This object specifies the parameters that
can be modified, when admission control is enabled.
loadBased - controller will reserve and manage
max-bandwidth and … | scalar | Enumeration | .1.3.6.1.4.1.9.9.524.1.21.8 |
| cLQd11axExpeditedBw This object specifies if expedited BW feature is
enabled or not.
A value of 'true' will ensure that the APs advertise
the expedited BW support in their beacons and
association re… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.21.9 |