cLQd11aVoiceMaxRoamBandwidth
CISCO-LWAPP-QOS-MIB ·
.1.3.6.1.4.1.9.9.524.1.1.3
Object
scalar
r/w
Percent Unsigned32
This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11aVoiceMaxAdmBandwidth, that can be
allocated to roaming clients for voice traffic,
when admission control is enabled for 802.11a
interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11a
network is disabled and not operational. The
value configured through this object takes
effect when the 802.11a network is enabled.
Context
- MIB
- CISCO-LWAPP-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.524.1.1.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- Percent
- Parent
- cLQd11aCACConfig
- Siblings
- 21
Syntax
Percent Unsigned32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLQd11aVoiceAdmCtrlSupport This object is used to enable or disable admission
control for voice traffic flowing through the 802.11a
interfaces in the controller.
When set to 'true', controller w… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.1 |
| cLQd11aEdcaProfile This object specifies the EDCA profile to be used
in EDCA Parameter set element.
wmmDefault - WMM default standard parameters.
svpVoice - Spectralink voice priori… | scalar | Enumeration | .1.3.6.1.4.1.9.9.524.1.1.10 |
| cLQd11aMacOptimization This object specifies MAC enhancements for voice,
resulting in improvement in number of voice calls
serviced per access point.
A value of 'true' enables MAC optimization.
A value… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.11 |
| cLQd11aMaxCallLimit deprecated This object specifies the maximum number of CAC Voice Calls
allowed on dot11a radio band.
Value of zero denotes no limit. No replacement object. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.524.1.1.12 |
| cLQd11aMcastDirectEnable This object specifies the decision flag to allow multicast direct
stream on radio. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.13 |
| cLQd11aBestEffortAdmission This object specifies whether to admit a media stream in best
effort queue. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.14 |
| cLQd11aRedirectBestEffort This object specifies whether a unicast or multicast only video
stream can be redirected to best effort. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.15 |
| cLQd11aRadioMaxStreams This object specifies the maximum number of allowed streams per
radio for a 802.11a band. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.524.1.1.16 |
| cLQd11aMaxVideoATPercent This object specifies the maximum allowed bandwidth for video
traffic. | scalar | Percent Integer32 | .1.3.6.1.4.1.9.9.524.1.1.17 |
| cLQd11aMaxVoiceATPercent This object specifies the maximum allowed bandwidth for voice
traffic. | scalar | Percent Integer32 | .1.3.6.1.4.1.9.9.524.1.1.18 |
| cLQd11aMaxMediaATPercent This object specifies the maximum allowed bandwidth for media
traffic. | scalar | Percent Integer32 | .1.3.6.1.4.1.9.9.524.1.1.19 |
| cLQd11aVoiceMaxAdmBandwidth This object denotes the maximum bandwidth
that can be allocated by controller for voice
traffic when admission control is enabled for
for 802.11a interfaces in the controller.
… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.1.2 |
| cLQd11aMinPhyRate This object specifies the minimum physical rate that should be
enabled by a client to successfully join a media stream. | scalar | CiscoLwappDot11aPhyRates | .1.3.6.1.4.1.9.9.524.1.1.20 |
| cLQd11aClientMaxStreams This object specifies the maximum number of allowed streams per
client for a 802.11a band. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.524.1.1.21 |
| cLQd11aSipCacSupportEnable This object specifies whether SIP CAC is enabled.
A value of 'true' enables SIP CAC on dot11a radio band.
A value of 'true' disables SIP CAC on dot11a radio band. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.22 |
| cLQd11aVideoAdmCtrlSupport This object is used to enable or disable admission
control for video traffic flowing through the 802.11a
interfaces in the controller.
When set to 'true', controller w… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.4 |
| cLQd11aVideoMaxAdmBandwidth This object denotes the maximum bandwidth
that can be allocated by controller for video traffic
when admission control is enabled for 802.11a
interfaces in the controller. When … | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.1.5 |
| cLQd11aVideoMaxRoamBandwidth This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11aVideoMaxAdmBandwidth, that can be
allocated to roaming clients for video traf… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.1.6 |
| cLQd11aGprProbeInterval This object specifies the GPR probe interval
period to be used by all 802.11a interfaces in the
controller. The radios are advertising any
WLAN with GPR support enabled.
… | scalar | TU Unsigned32 | .1.3.6.1.4.1.9.9.524.1.1.7 |
| cLQd11aVoiceCtrl This object specifies the parameters that
can be modified, when admission control is enabled.
loadBased - controller will reserve and manage
max-bandwidth and … | scalar | Enumeration | .1.3.6.1.4.1.9.9.524.1.1.8 |
| cLQd11aExpeditedBw This object specifies if expedited BW feature is
enabled or not.
A value of 'true' will ensure that the APs advertise
the expedited BW support in their beacons and
association re… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.9 |