cLQd11aCACConfig

CISCO-LWAPP-QOS-MIB · .1.3.6.1.4.1.9.9.524.1.1
MIB view Table view

Object

node

No description available.

Context

MIB
CISCO-LWAPP-QOS-MIB
OID
.1.3.6.1.4.1.9.9.524.1.1
Type
node
Parent
ciscoLwappQosMIBObjects
Siblings
18
Children
22

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cLQd11SipCacConfignode-.1.3.6.1.4.1.9.9.524.1.10
cLQMediaStreamConfignode-.1.3.6.1.4.1.9.9.524.1.11
cLQPreferredCallConfignode-.1.3.6.1.4.1.9.9.524.1.12
cLQConfigObjectsnode-.1.3.6.1.4.1.9.9.524.1.13
cLQoSProfileConfignode-.1.3.6.1.4.1.9.9.524.1.14
cLQoSSipSnoopingConfignode-.1.3.6.1.4.1.9.9.524.1.15
cLQoSAirTimeFairnessnode-.1.3.6.1.4.1.9.9.524.1.16
cLQd11bCACConfignode-.1.3.6.1.4.1.9.9.524.1.2
cLQd11axCACConfignode-.1.3.6.1.4.1.9.9.524.1.21
cLQCacThresholdnode-.1.3.6.1.4.1.9.9.524.1.22
cLQCacStatsnode-.1.3.6.1.4.1.9.9.524.1.23
cLQd11GprConfignode-.1.3.6.1.4.1.9.9.524.1.3
cLQd11CACStatsnode-.1.3.6.1.4.1.9.9.524.1.4
cLQEntConfConfignode-.1.3.6.1.4.1.9.9.524.1.5
cLQd11VoiceStatsnode-.1.3.6.1.4.1.9.9.524.1.6
cLQVoiceWlanConfignode-.1.3.6.1.4.1.9.9.524.1.7
cLQVoiceClientnode-.1.3.6.1.4.1.9.9.524.1.8
cLQMediaClientnode-.1.3.6.1.4.1.9.9.524.1.9
Child Objects
ObjectTypeSyntaxOID
cLQd11aVoiceAdmCtrlSupport
This object is used to enable or disable admission control for voice traffic flowing through the 802.11a interfaces in the controller. When set to 'true', controller w…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.524.1.1.1
cLQd11aEdcaProfile
This object specifies the EDCA profile to be used in EDCA Parameter set element. wmmDefault - WMM default standard parameters. svpVoice - Spectralink voice priori…
scalarEnumeration.1.3.6.1.4.1.9.9.524.1.1.10
cLQd11aMacOptimization
This object specifies MAC enhancements for voice, resulting in improvement in number of voice calls serviced per access point. A value of 'true' enables MAC optimization. A value…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.524.1.1.11
cLQd11aMaxCallLimit deprecated
This object specifies the maximum number of CAC Voice Calls allowed on dot11a radio band. Value of zero denotes no limit. No replacement object.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.524.1.1.12
cLQd11aMcastDirectEnable
This object specifies the decision flag to allow multicast direct stream on radio.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.524.1.1.13
cLQd11aBestEffortAdmission
This object specifies whether to admit a media stream in best effort queue.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.524.1.1.14
cLQd11aRedirectBestEffort
This object specifies whether a unicast or multicast only video stream can be redirected to best effort.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.524.1.1.15
cLQd11aRadioMaxStreams
This object specifies the maximum number of allowed streams per radio for a 802.11a band.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.524.1.1.16
cLQd11aMaxVideoATPercent
This object specifies the maximum allowed bandwidth for video traffic.
scalarPercent Integer32.1.3.6.1.4.1.9.9.524.1.1.17
cLQd11aMaxVoiceATPercent
This object specifies the maximum allowed bandwidth for voice traffic.
scalarPercent Integer32.1.3.6.1.4.1.9.9.524.1.1.18
cLQd11aMaxMediaATPercent
This object specifies the maximum allowed bandwidth for media traffic.
scalarPercent Integer32.1.3.6.1.4.1.9.9.524.1.1.19
cLQd11aVoiceMaxAdmBandwidth
This object denotes the maximum bandwidth that can be allocated by controller for voice traffic when admission control is enabled for for 802.11a interfaces in the controller. …
scalarPercent Unsigned32.1.3.6.1.4.1.9.9.524.1.1.2
cLQd11aMinPhyRate
This object specifies the minimum physical rate that should be enabled by a client to successfully join a media stream.
scalarCiscoLwappDot11aPhyRates.1.3.6.1.4.1.9.9.524.1.1.20
cLQd11aClientMaxStreams
This object specifies the maximum number of allowed streams per client for a 802.11a band.
scalarUnsigned32.1.3.6.1.4.1.9.9.524.1.1.21
cLQd11aSipCacSupportEnable
This object specifies whether SIP CAC is enabled. A value of 'true' enables SIP CAC on dot11a radio band. A value of 'true' disables SIP CAC on dot11a radio band.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.524.1.1.22
cLQd11aVoiceMaxRoamBandwidth
This object represents the bandwidth relative to the maximum allocated bandwidth indicated by cLQd11aVoiceMaxAdmBandwidth, that can be allocated to roaming clients for voice traf…
scalarPercent Unsigned32.1.3.6.1.4.1.9.9.524.1.1.3
cLQd11aVideoAdmCtrlSupport
This object is used to enable or disable admission control for video traffic flowing through the 802.11a interfaces in the controller. When set to 'true', controller w…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.524.1.1.4
cLQd11aVideoMaxAdmBandwidth
This object denotes the maximum bandwidth that can be allocated by controller for video traffic when admission control is enabled for 802.11a interfaces in the controller. When …
scalarPercent Unsigned32.1.3.6.1.4.1.9.9.524.1.1.5
cLQd11aVideoMaxRoamBandwidth
This object represents the bandwidth relative to the maximum allocated bandwidth indicated by cLQd11aVideoMaxAdmBandwidth, that can be allocated to roaming clients for video traf…
scalarPercent Unsigned32.1.3.6.1.4.1.9.9.524.1.1.6
cLQd11aGprProbeInterval
This object specifies the GPR probe interval period to be used by all 802.11a interfaces in the controller. The radios are advertising any WLAN with GPR support enabled. …
scalarTU Unsigned32.1.3.6.1.4.1.9.9.524.1.1.7
cLQd11aVoiceCtrl
This object specifies the parameters that can be modified, when admission control is enabled. loadBased - controller will reserve and manage max-bandwidth and …
scalarEnumeration.1.3.6.1.4.1.9.9.524.1.1.8
cLQd11aExpeditedBw
This object specifies if expedited BW feature is enabled or not. A value of 'true' will ensure that the APs advertise the expedited BW support in their beacons and association re…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.524.1.1.9