cLQd11aMaxCallLimit
CISCO-LWAPP-QOS-MIB ·
.1.3.6.1.4.1.9.9.524.1.1.12
Object
This object specifies the maximum number of CAC Voice Calls allowed on dot11a radio band. Value of zero denotes no limit. No replacement object.
Context
- MIB
- CISCO-LWAPP-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.524.1.1.12- Type
- scalar
- Access
- readwrite
- Status
- deprecated
- Parent
- cLQd11aCACConfig
- Siblings
- 21
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLQd11aVoiceAdmCtrlSupport This object is used to enable or disable admission
control for voice traffic flowing through the 802.11a
interfaces in the controller.
When set to 'true', controller w… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.1 |
| cLQd11aEdcaProfile This object specifies the EDCA profile to be used
in EDCA Parameter set element.
wmmDefault - WMM default standard parameters.
svpVoice - Spectralink voice priori… | scalar | Enumeration | .1.3.6.1.4.1.9.9.524.1.1.10 |
| cLQd11aMacOptimization This object specifies MAC enhancements for voice,
resulting in improvement in number of voice calls
serviced per access point.
A value of 'true' enables MAC optimization.
A value… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.11 |
| cLQd11aMcastDirectEnable This object specifies the decision flag to allow multicast direct
stream on radio. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.13 |
| cLQd11aBestEffortAdmission This object specifies whether to admit a media stream in best
effort queue. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.14 |
| cLQd11aRedirectBestEffort This object specifies whether a unicast or multicast only video
stream can be redirected to best effort. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.15 |
| cLQd11aRadioMaxStreams This object specifies the maximum number of allowed streams per
radio for a 802.11a band. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.524.1.1.16 |
| cLQd11aMaxVideoATPercent This object specifies the maximum allowed bandwidth for video
traffic. | scalar | Percent Integer32 | .1.3.6.1.4.1.9.9.524.1.1.17 |
| cLQd11aMaxVoiceATPercent This object specifies the maximum allowed bandwidth for voice
traffic. | scalar | Percent Integer32 | .1.3.6.1.4.1.9.9.524.1.1.18 |
| cLQd11aMaxMediaATPercent This object specifies the maximum allowed bandwidth for media
traffic. | scalar | Percent Integer32 | .1.3.6.1.4.1.9.9.524.1.1.19 |
| cLQd11aVoiceMaxAdmBandwidth This object denotes the maximum bandwidth
that can be allocated by controller for voice
traffic when admission control is enabled for
for 802.11a interfaces in the controller.
… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.1.2 |
| cLQd11aMinPhyRate This object specifies the minimum physical rate that should be
enabled by a client to successfully join a media stream. | scalar | CiscoLwappDot11aPhyRates | .1.3.6.1.4.1.9.9.524.1.1.20 |
| cLQd11aClientMaxStreams This object specifies the maximum number of allowed streams per
client for a 802.11a band. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.524.1.1.21 |
| cLQd11aSipCacSupportEnable This object specifies whether SIP CAC is enabled.
A value of 'true' enables SIP CAC on dot11a radio band.
A value of 'true' disables SIP CAC on dot11a radio band. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.22 |
| cLQd11aVoiceMaxRoamBandwidth This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11aVoiceMaxAdmBandwidth, that can be
allocated to roaming clients for voice traf… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.1.3 |
| cLQd11aVideoAdmCtrlSupport This object is used to enable or disable admission
control for video traffic flowing through the 802.11a
interfaces in the controller.
When set to 'true', controller w… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.4 |
| cLQd11aVideoMaxAdmBandwidth This object denotes the maximum bandwidth
that can be allocated by controller for video traffic
when admission control is enabled for 802.11a
interfaces in the controller. When … | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.1.5 |
| cLQd11aVideoMaxRoamBandwidth This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11aVideoMaxAdmBandwidth, that can be
allocated to roaming clients for video traf… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.1.6 |
| cLQd11aGprProbeInterval This object specifies the GPR probe interval
period to be used by all 802.11a interfaces in the
controller. The radios are advertising any
WLAN with GPR support enabled.
… | scalar | TU Unsigned32 | .1.3.6.1.4.1.9.9.524.1.1.7 |
| cLQd11aVoiceCtrl This object specifies the parameters that
can be modified, when admission control is enabled.
loadBased - controller will reserve and manage
max-bandwidth and … | scalar | Enumeration | .1.3.6.1.4.1.9.9.524.1.1.8 |
| cLQd11aExpeditedBw This object specifies if expedited BW feature is
enabled or not.
A value of 'true' will ensure that the APs advertise
the expedited BW support in their beacons and
association re… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.1.9 |