clMeshNodeRange
CISCO-LWAPP-MESH-MIB ·
.1.3.6.1.4.1.9.9.616.1.2.1
Object
scalar
r/w
feet Unsigned32
This object specifies the optimal distance in feet between RAP and MAP for backhaul link without degrading SNR value.
Context
- MIB
- CISCO-LWAPP-MESH-MIB
- OID
.1.3.6.1.4.1.9.9.616.1.2.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- feet
- Parent
- ciscoLwappMeshGlobalConfig
- Siblings
- 32
Syntax
feet Unsigned32
Values & Constraints
Object Constraints
range: 150-132000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clMeshExcessiveParentChangeThreshold This object specifies the threshold for the number
of times a child mesh node changes its parent. If number
of parent change exceeds this value with in the time
interval defined… | scalar | occcurences Unsigned32 | .1.3.6.1.4.1.9.9.616.1.2.10 |
| clMeshExcessiveParentChangeInterval This object specifies the time interval during which
number of times a child mesh node changes its parent
change is counted.
If number of parent change exceeds the value defined… | scalar | hundredths-seconds Integer32 | .1.3.6.1.4.1.9.9.616.1.2.11 |
| clMeshBackgroundScan This object specifies whether mesh AP can
scans its neighbors on different channel other than
only its current channel on backhaul link.
A value of 'true' indicates mesh backgrou… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.12 |
| clMeshAuthenticationMode This object specifies authentication mode of RAP and
MAP mesh nodes in controller.
none - no authentication is done.
psk - pre shared key. Keys provided during manufactur… | scalar | Enumeration | .1.3.6.1.4.1.9.9.616.1.2.13 |
| clMeshExcessiveHopCountThreshold This object specifies threshold number of hops from the
MAP node to the RAP. Crossing this value will raise the
'ciscoLwappMeshExcessiveHopCount' notification. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.616.1.2.14 |
| clMeshExcessiveRapChildThreshold This object specifies threshold number of children MAPs
attached to a parent RAP. Crossing this value will raise the
'ciscoLwappMeshExcessiveChildren' notification. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.616.1.2.15 |
| clMeshExcessiveMapChildThreshold This object specifies threshold number of children MAPs
attached to a parent MAP. Crossing this value will raise the
'ciscoLwappMeshExcessiveChildren' notification. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.616.1.2.16 |
| clMeshHighSNRThresholdAbate This object specifies the abate threshold value of
SNR. This threshold value is used to determine if the
SNR value seen by the child mesh node has reached
below this level and i… | scalar | db Unsigned32 | .1.3.6.1.4.1.9.9.616.1.2.17 |
| clMeshHighSNRThresholdOnset This object specifies the onset threshold value of
SNR. This threshold value is use to determine if the
SNR value seen by the child mesh node has reached
above this level and is… | scalar | db Unsigned32 | .1.3.6.1.4.1.9.9.616.1.2.18 |
| clMeshPublicSafetyBackhaulGlobal This object specifies user to enable 4.9Ghz as
backhaul link which is considered to be public safety
band limited to some service providers.
A value of 'true' indicates that 4.9… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.19 |
| clMeshBackhaulClientAccess This object specifies whether client access needs to
be allowed on backhaul link. If AP has two radios,802.11a
and 802.11bg, then radio which is used as backhaul link
does not h… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.2 |
| clMeshisAMSDUEnable This object specifies the Aggreation Service Data Unit at
MAC layer (AMSDU) status.
A value of 'true' indicates that AMSDU is enabled.
A value of 'false' indicates that AMSDU is d… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.20 |
| clMeshIsIdsEnable This object specifies the Rogue and Signature Detection status.
A value of 'true' indicates that IDS is enabled.
A value of 'false' indicates that IDS is disabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.21 |
| clMeshIsDCAChannelsEnable This object specifies the Dynamic Channel Assignment status.
A value of 'true' indicates DCA feature for AP1524SB is
enabled.
A value of 'false' indicates DCA feature for AP1524… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.22 |
| clMeshIsExtendedUAEnable This object specifies the Universal Client Access status.
A value of 'true' indicates that ExtendedUA feature is
enabled.
A value of 'false' indicates that ExtendedUA feature is … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.23 |
| clMeshIsBDomainChannelsEnable This object specifies the UNI1 Channel status.
A value of 'true' indicates that B domain channels for
outdoor mesh AP can be alllowed.
A value of 'false' indicates that B domain … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.24 |
| clMeshPskKeyProvisionEnable This object specifies the PSK key provisioning status.
A value of 'true' indicates that PSK Key provisioning
is enabled.
A value of 'false' indicates that PSK Key provisioning
i… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.25 |
| clMeshPskKeyWindowEnable This object specifies the PSK key provisioning window status.
A value of 'true' indicates that PSK Key provisioning window
is enabled.
A value of 'false' indicates that PSK Key p… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.26 |
| clMeshEthenetBridgingVlanTransparent This object specifies the vlan transparent mode status.
Vlan transparent mode will allow all the VLANs on secondary
ethernet interface
A value of 'true' indicates that Vlan Trans… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.27 |
| clMeshRAPDownlinkBackhaul This objects specifies the global config of Mesh backhaul
slot configured on the WLC.
And also used to configure/change the backhaul slot of RAPs
joined to the WLC.
slot0 - downl… | scalar | Enumeration | .1.3.6.1.4.1.9.9.616.1.2.28 |
| clMeshPskInUseKeyIndex This object specifies the psk key index which
is currently in use out of the configured PSK keys
for Mesh Access Point Authorization | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.616.1.2.29 |
| clMeshMacFilterList This object specifies whether mac filtering needs to
be enabled on controller for joining mesh AP.
A value of 'true' indicates that mesh mac filter is enabled.
A value of 'false' … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.3 |
| clMeshEthBridgingAllowBpdu This object specifies whether we should allow
BPDU packets in the mesh network when ethernet
bridging is enabled.
A value of 'true' indicates BPDU packets are allowed
in mesh netw… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.30 |
| clMeshIsRapChannelSyncEnabled This object specifies whether mesh RAP channels list sync
is allowed or not with mobility peers.
A value of 'true' indicates RAP channels sync is allowed
with mobility peers.
A va… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.31 |
| clMeshIsBackhaulRrmEnabled This object specifies whether Radio Resource Management(RRM)
is enabled or not in mesh backhaul radio. In Enabled state, RRM
measurements are enabled for Ethernet connected Root m… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.32 |
| clMeshIsCacEnabled This object specifies whether CAC functionality is enabled on
mesh backhaul radio
A value of 'true' indicates CAC is enabed in Mesh backhaul radio.
A value of 'false' indicates CA… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.2.33 |
| clMeshMeshNodeAuthFailureThreshold This object specifies the authorization failure
threshold value. When the number of failures exceeds
this value then 'ciscoLwappMeshAuthFailure'
notification is raised. | scalar | failures Unsigned32 | .1.3.6.1.4.1.9.9.616.1.2.4 |
| clMeshMeshChildAssociationFailuresThreshold This object specifies the number of failed association
to controller occurred through a parent mesh node.
When this values exceeds then
'ciscoLwappMeshChildExcludedParent' notif… | scalar | failures Unsigned32 | .1.3.6.1.4.1.9.9.616.1.2.5 |
| clMeshMeshChildExcludedParentInterval This object specifies the time interval during which
a child mesh node will exclude a parent mesh node.
During this interval child will not try to associate
the controller throug… | scalar | hundredths-seconds Integer32 | .1.3.6.1.4.1.9.9.616.1.2.6 |
| clMeshSNRThresholdAbate This object specifies the abate threshold value of
SNR. This threshold value is use to determine if the
SNR value seen by the child mesh node has reached
acceptable level and is… | scalar | db Unsigned32 | .1.3.6.1.4.1.9.9.616.1.2.7 |
| clMeshSNRThresholdOnset This object specifies the onset threshold value of
SNR. This threshold value is use to determine if the
SNR value seen by the child mesh node has reached
below unacceptable leve… | scalar | db Unsigned32 | .1.3.6.1.4.1.9.9.616.1.2.8 |
| clMeshSNRCheckTimeInterval This object represents the time interval after which
SNR value is checked by child mesh node. | scalar | hundredths-seconds Integer32 | .1.3.6.1.4.1.9.9.616.1.2.9 |