cimrMsuProcAcceptableThreshold
CISCO-ITP-MSU-RATES-MIB ·
.1.3.6.1.4.1.9.9.529.1.2.1.1.3
Object
column
r/w
MSUs per second CimrMsuThreshold
This object is used to specify a level of traffic below which the traffic is considered to be acceptable. All changes to this threshold will take effect at the end of the current interval. The value for this object must be less than the values specified by cimrMsuProcWarningThreshold and cimrMsuProcOverloadedThreshold objects.
Context
- MIB
- CISCO-ITP-MSU-RATES-MIB
- OID
.1.3.6.1.4.1.9.9.529.1.2.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Units
- MSUs per second
- Parent
- cimrMsuProcEntry
- Table
- cimrMsuProcTable
- Siblings
- 8
Syntax
MSUs per second CimrMsuThreshold
- Source
- CimrMsuThreshold
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0
range: 100..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cimrMsuProcIndex An index that uniquely represents a processor. This
index is assigned arbitrarily by the engine and is
not saved over reboots. | column | Unsigned32 | .1.3.6.1.4.1.9.9.529.1.2.1.1.1 |
| cimrMsuProcPhysicalIndex The entPhysicalIndex of the physical entity for which
the MSU measurements in this entry are maintained.
The exact type of this entity is described by its
entPhysicalVendorType v… | column | CISCO-TCEntPhysicalIndexOrZero | .1.3.6.1.4.1.9.9.529.1.2.1.1.2 |
| cimrMsuProcWarningThreshold This object is used to specify a level of traffic that
indicates a rate that is above acceptable level, but is
below level that impacts routing of MSUs. All changes to
this thr… | column | MSUs per second CimrMsuThreshold | .1.3.6.1.4.1.9.9.529.1.2.1.1.4 |
| cimrMsuProcOverloadedThreshold This object is used to specify a level of traffic that
indicates a rate that may impact routing of MSUs. All
changes to this threshold will take effect at the end
of the curren… | column | MSUs per second CimrMsuThreshold | .1.3.6.1.4.1.9.9.529.1.2.1.1.5 |
| cimrMsuProcReset This object object always returns the 'false' value.
Setting the object to 'true' resets the following
objects.
cimrMsuProcDurWarning
cimrMsuProcDurOve… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.529.1.2.1.1.6 |
| cimrMsuProcResetTimestamp The value of sysUpTime when the measurements
were reset by setting the cimrMsuProcReset object or
by changing any of the following objects.
cimrMsuRateSampleInterv… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.529.1.2.1.1.7 |
| cimrMsuProcSlotNumber The number of slot contain processor and will be
set to zero when platform does not support
processsors in multiple slots. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.529.1.2.1.1.8 |
| cimrMsuProcBayNumber The number of bay contain processor and will be
set to zero when platform does not support
processsors in multiple bays. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.529.1.2.1.1.9 |