cgprsAccPtIpv6AddrPool
CISCO-GPRS-ACC-PT-MIB ·
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.9
Object
column
r/w
Enumeration
This object specifies a dynamic address allocation
method followed by this access point.
- 'global', which indicates that no method is
defined specifically to this access point and the
DHCP or radius server configured for this Gateway
under AAA configurations will be used to
allocation a dynamic IPv6 address to the user.
- 'dhcp', which indicates that the DHCP server
will be used.
- 'radius', which indicates that the radius server
will be used.
- 'disable', which indicates that dynamic address
allocation is disabled.
- 'local', indicates that local address pool
configured on the Gateway is going to be used.
cgprsAccPtIpv6AddrLocalPoolName denotes the name
of the corresponding address pool.
Context
- MIB
- CISCO-GPRS-ACC-PT-MIB
- OID
.1.3.6.1.4.1.9.9.183.1.1.9.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cgprsAccPtIpv6Entry
- Table
- cgprsAccPtIpv6Table
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | global |
2 | dhcp |
3 | disable |
4 | local |
5 | radius |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cgprsAccPtIpv6BaseVTemplate This object specifies the base virtual template
for an APN. To create a sub-interface for each PDP or
Bearer, a base virtual-template needs to be configured so
that virtual-acces… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.1 |
| cgprsAccPtIpv6AddrLocalPoolName This object specifies the name of the local address
pool used when cgprsAccPtIpv6AddrPool is set to
'local'. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.10 |
| cgprsAccPtIpv6Redirect This object specifies the traffic redirection in an
APN.
- 'none', indicates that, traffic will not be
redirected i.e., the traffic will get switched through
t… | column | Enumeration | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.11 |
| cgprsAccPtIpv6RedirectAddrType This object specifies the type of
cgprsAccPtIpv6RedirectAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.12 |
| cgprsAccPtIpv6RedirectAddr This object specifies the Internet address of the
device to which traffic will be re-directed. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.13 |
| cgprsAccPtIpv6SecurityVerifySrc When this object is set to 'true', the Gateway will check the
upstream TPDU source address against the address
previously assigned to this user. If the addresses are
different, t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.14 |
| cgprsAccPtIpv6SecurityVerifyDst When this object is set to 'true', the Gateway will check the
upstream TPDU destination address against the range of
IP addresses reserved for PLMN devices. If there is a
match, … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.15 |
| cgprsAccPtIpv6AddrAllocations This object indicates the total number of IPv6
addresses currently allocated to user. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.16 |
| cgprsAccPtDhcpv6ProxClientIntf The object indicates the interface index, of the
interface which is to be used for DHCPv6 request
multicasting. | column | CISCO-TCInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.17 |
| cgprsAccptDhcpv6RapidCommit This object indicates that whether DHCPv6 rapid-commit
feature is enabled for this APN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.18 |
| cgprsAccptDhcpv6PoolName This object represents the IPV6 DHCP
pool-name configured for this APN. | column | OctetString | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.19 |
| cgprsAccPtIpv6DnsAddrType This object specifies the type of
cgprsAccPtIpv6DnsPriAddress and
cgprsAccPtIpv6DnsSecAddress.
DNS addresses to be sent to the MS can come from DHCP
server or RADI… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.2 |
| cgprsAccPtIpv6DnsPriAddress This object specifies the IPv6 address of the primary
DNS server that will be sent to MS. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.3 |
| cgprsAccPtIpv6DnsSecAddress This object specifies the IPv6 address of the secondary
DNS server that will be sent to MS. This object can
be configured only after configuring the primary DNS
address(cgprsAcc… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.4 |
| cgprsAccPtIpv6Enable This object specifies whether the APN supports
IPv6 PDP or Bearer.
The Gateway supports dual stack APN. Both IPv6 and IPv4 PDP
or Bearer can be created for the s… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.5 |
| cgprsAccPtIpv6Exclusive This object specifies whether the APN supports only
IPv6 PDPs or Bearers. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.6 |
| cgprsAccPtIpv6AccessGroupDown This object specifies the name of the access list
applied to all the traffic received by this APN from
the PDN, for forwarding towards a MS. | column | AccessControlListName | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.7 |
| cgprsAccPtIpv6AccessGroupUp This object specifies the name of the access list
applied to all the traffic received by this APN from
a MS, for forwarding towards PDN. | column | AccessControlListName | .1.3.6.1.4.1.9.9.183.1.1.9.1.1.8 |