cgprsAccPtIpAddressPool
CISCO-GPRS-ACC-PT-MIB ·
.1.3.6.1.4.1.9.9.183.1.1.1.1.5
Object
column
r/w
Enumeration
Specifies a dynamic address allocation method for
this access point.
- 'global', which indicates that no method is
defined specifically to this access point and the
DHCP or radius server configured for this Gateway
'globally' will be used to allocation a dynamic IP
address to the user.
- 'dhcp', which indicates that the DHCP server
will be used.
- 'radius', which indicates that the radius server
will be used.
- 'disable', which indicates that dynamic address
allocation is disabled.
- 'local', indicates that local address pool
configured on the Gateway is going to be used.
cgprsAccPtIpAddrLocalPoolName denotes the name
of the corresponding address pool.
Context
- MIB
- CISCO-GPRS-ACC-PT-MIB
- OID
.1.3.6.1.4.1.9.9.183.1.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cgprsAccPtEntry
- Table
- cgprsAccPtTable
- Siblings
- 35
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | global |
2 | dhcp |
3 | radius |
4 | disable |
5 | local |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cgprsAccPtIndex A locally unique identifier for this access point on
this Gateway. | column | Unsigned32 | .1.3.6.1.4.1.9.9.183.1.1.1.1.1 |
| cgprsAccPtRadiusServerSec obsolete Specifies a secondary RADIUS server.
The secondary RADIUS server will be used if the primary
RADIUS server is not available.
Obsoleted by cgprsAccPt… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.183.1.1.1.1.10 |
| cgprsAccPtIPAccListGroupIn This object specifies the ACL against which to compare
packets received at this Access Point from the PDN for
forwarding towards an MS.
Access list at the access po… | column | AccessControlListId | .1.3.6.1.4.1.9.9.183.1.1.1.1.11 |
| cgprsAccPtIPAccListGroupOut This object specifies the ACL against which to compare
packets originated by an MS and received by at this
Access Point for forwarding to the PDN.
Access list at t… | column | AccessControlListId | .1.3.6.1.4.1.9.9.183.1.1.1.1.12 |
| cgprsAccPtIfIndex obsolete Specifies an interface to be used by GGSN on Gi
interface.
The value zero indicates that no interface is
specified.
The cgprsAccPtIfNextHop must b… | column | CISCO-TCInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.183.1.1.1.1.13 |
| cgprsAccPtIfNextHop obsolete Specifies the IP address of the next hop for the
Gi interface, specified by cgprsAccPtIfIndex.
This value is mandatory if the value of
cgprsAccPtIfIndex is non-zer… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.183.1.1.1.1.14 |
| cgprsAccPtAccessViolation Specifies how access violation should be treated.
An access violation occurs if the IP packets violates
any rules in ACL as specified by either
cgprsAccPtIPAccList… | column | Enumeration | .1.3.6.1.4.1.9.9.183.1.1.1.1.15 |
| cgprsAccPtSubrRequired This object indicates if a user needs to subscribe
to this access point before accessing it. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.183.1.1.1.1.16 |
| cgprsAccPtNetworkInitiated This object indicates whether network (PDN)
initiated PDP or Bearer sessions are allowed for
this access point. The more common case, is false,
which indicates that the PDP or Bea… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.183.1.1.1.1.17 |
| cgprsAccPtIpAddrAllocations Indicates the number of IP addresses allocated to
MS's.
Trigger Condition: This gauge is
incremented/decremented by successful completion of
create/delete dynamic … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.183.1.1.1.1.18 |
| cgprsAccPtUsers obsolete The number of mobile subscribers currently accessing
this APN. Obsoleted by cgprsAccPtActivePdps. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.183.1.1.1.1.19 |
| cgprsAccPtRowStatus This object is used to create or delete conceptual
row in this table.
To create a row, set this object to 'createAndGo'.
There are no mandatory objects in a create … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.183.1.1.1.1.2 |
| cgprsAccPtIdlePdpPurgeTimer This object indicates maximum idle connection time
allowed to the PDP or Bearer context before termination of the
GTP session. A value of 0 means session idle timer
is not used. | column | hours Unsigned32 | .1.3.6.1.4.1.9.9.183.1.1.1.1.20 |
| cgprsAccPtBlockMsRoaming This object indicates whether access to a roaming
MS needs to be blocked for this APN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.183.1.1.1.1.21 |
| cgprsAccPtAnonymousUserName This object specifies the anonymous user name, which
is used when a MS tries to access a non-transparent
APN without supplying user name and password. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.183.1.1.1.1.22 |
| cgprsAccPtAnonymousUserPassword This object specifies the password corresponding
to cgprsAccPtAnonymousUserName. For security reasons,
retrieving this object returns a zero-length string. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.183.1.1.1.1.23 |
| cgprsAccPtMsIsdnSuppressed This object specifies whether the ISDN ID used
by the MS, when authenticating with a radius server,
needs to be suppressed or not. When set to 'true',
the ISDN ID attribute will… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.183.1.1.1.1.24 |
| cgprsAccPtMsIsdnSuppressedValue This object specifies the value that will be
transmitted to the radius server in place of
mobile stations ISDN ID. This object can only
be set if cgprsAccPtMsIsdnSuppressed is … | column | OctetString | .1.3.6.1.4.1.9.9.183.1.1.1.1.25 |
| cgprsAccPtAaaAuthServerGroup This object specifies the AAA radius server group
that is used for authentication by this APN. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.183.1.1.1.1.26 |
| cgprsAccPtAaaAccountServerGroup This object specifies the AAA radius server group
that is used for accounting by this APN. If no
group is specified for accounting,
cgprsAccPtAaaAuthServerGroup will be used. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.183.1.1.1.1.27 |
| cgprsAccPtAaaAccountingEnable This object is used to enable accounting when the
APN is in 'transparent' mode. When the object is set to
'true', cgprsAccPtAaaAccountServerGroup is used for
accounting. If cgpr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.183.1.1.1.1.28 |
| cgprsAccPtType This object specifies the type of APN.
'virtual' - Specifies an APN type that is not
associated with any specific physical target network
on the Gateway. When th… | column | Enumeration | .1.3.6.1.4.1.9.9.183.1.1.1.1.29 |
| cgprsAccPtName The Access Point Name. It is composed of two parts:
- The APN Network Identifier is mandatory and is a
fully qualified domain name according to the DNS
naming … | column | OctetString | .1.3.6.1.4.1.9.9.183.1.1.1.1.3 |
| cgprsAccPtVrfName This object specifies the name of the VRF with
which this APN is associated. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.183.1.1.1.1.30 |
| cgprsAccPtDhcpAddrSpace This object specifies the address space used
by the dhcp server. This object can only be
set if cgprsAccPtDHCPServerPri is set. | column | Enumeration | .1.3.6.1.4.1.9.9.183.1.1.1.1.31 |
| cgprsAccPtPppRegenEnable This object is used to enable Gateway to regenerate
a PPP session for each IP PDP or Bearer context on
this APN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.183.1.1.1.1.32 |
| cgprsAccPtPppRegenMaxSessions This object specifies the maximum number of regenerated
PPP sessions allowed for this access-point.
This object can only be set if cgprsAccPtPppRegenEnable
is set t… | column | Integer32 | .1.3.6.1.4.1.9.9.183.1.1.1.1.33 |
| cgprsAccPtPppRegenSetupTime This object specifies the maximum tolerance time within
which a regenerated PPP session has to fully come up.
This object can only be set if cgprsAccPtPppRegenEnabl… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.183.1.1.1.1.34 |
| cgprsAccPtAutoAggregation This object is used to enable auto aggregation on this
APN. When a user tries to configure entries in
cgprsAccPtAggregTable, this object will automatically
be set to 'false'. W… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.183.1.1.1.1.35 |
| cgprsAccPtPcscfServerGroupName This object represents the Proxy-CSCF server group that
will be used by this APN. The Proxy-CSCF server group
contains a list of Proxy-CSCF addresses which will be
provided to th… | column | OctetString | .1.3.6.1.4.1.9.9.183.1.1.1.1.36 |
| cgprsAccPtMode Specifies the type of access allowed to the PDN
through this access point.
- 'transparent', indicates that users can access
without authentication.
… | column | Enumeration | .1.3.6.1.4.1.9.9.183.1.1.1.1.4 |
| cgprsAccPtDHCPServerPri This object specifies the IP address of the primary
DHCP server from which a mobile subscriber can request
an IP address assignment for the access of this APN.
In c… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.183.1.1.1.1.6 |
| cgprsAccPtDHCPServerSec The IP address of the secondary DHCP server.
The secondary DHCP server is used if the primary
DHCP server is not available. This object can be
set after configuring… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.183.1.1.1.1.7 |
| cgprsAccPtDHCPGwAddr This object specifies the DHCP Gateway address that
is used in the 'giaddr' field of the DHCP request.
It is used by DHCP to determine from which pool the
IP address will be all… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.183.1.1.1.1.8 |
| cgprsAccPtRadiusServerPri obsolete This object specifies the IP address of the primary
RADIUS server used by this access point to
authenticate and/or authorize mobile users to access
the PDN.
In ca… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.183.1.1.1.1.9 |