cdtPppEapOpts
CISCO-DYNAMIC-TEMPLATE-MIB ·
.1.3.6.1.4.1.9.9.784.1.3.1.1.25
Object
column
r/w
Bits
This object specifies how the system processes the EAP on a
target PPP connection:
'refuse'
This option specifies that the system should refuse EAP
requests from peers of a target PPP connection.
'callin'
This option specifies that the system should only refuse EAP
requests for incoming calls on a target PPP connection.
This option is only relevant if the 'refuse' option is
set to '1'.
'wait'
This option delays EAP authentication until after the
peer of a target PPP connection has authenticated itself
to the system.
'local'
This option specifies that the system should locally
authenticate the peer of a target PPP connection,
rather than acting as a proxy to an external AAA server.
This column is valid only if the 'eapOpts' bit of the
corresponding instance of cdtPppValid is '1'.
Context
- MIB
- CISCO-DYNAMIC-TEMPLATE-MIB
- OID
.1.3.6.1.4.1.9.9.784.1.3.1.1.25- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cdtPppTemplateEntry
- Table
- cdtPppTemplateTable
- Siblings
- 38
Syntax
Bits
Values & Constraints
Enumerated Values
0 | refuse |
1 | callin |
2 | wait |
3 | local |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cdtPppValid This object specifies which attributes in the dynamic template
have been configured to valid values.
Each bit in this bit string corresponds to a column in this
tab… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.1 |
| cdtPppMaxTerminate This object specifies the number of unacknowledged
Terminate-Request messages a target PPP connection can send
before the system abandons LCP or NCP negotiations.
T… | column | Unsigned32 | .1.3.6.1.4.1.9.9.784.1.3.1.1.10 |
| cdtPppTimeoutAuthentication This objects specifies the maximum time the system will wait
for a response to an authentication request on a target PPP
connection.
This column is valid only if th… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.784.1.3.1.1.11 |
| cdtPppTimeoutRetry This objects specifies the maximum time the system will wait
for a response to a PPP control packets on a target PPP
connection.
This column is valid only if the 't… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.784.1.3.1.1.12 |
| cdtPppChapOpts This object specifies how the system processes the CHAP on a
target PPP connection:
'refuse'
This option specifies that the system should refuse CHAP
… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.13 |
| cdtPppChapHostname This object specifies the hostname sent in a CHAP response
on a target PPP connection. If the template does not include
this attribute, then the system uses its assigned hostname… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.14 |
| cdtPppChapPassword This object specifies the password used to construct a CHAP
response on the target PPP connection.
This column is valid only if the 'chapPassword' bit of the
corres… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.15 |
| cdtPppMsChapV1Opts This object specifies how the system processes version 1 of
Microsoft CHAP on a target PPP connection:
'refuse'
This option specifies that the system sh… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.16 |
| cdtPppMsChapV1Hostname This object specifies the hostname sent in a Microsoft CHAP
(v1) response on a target PPP connection. If the template does
not include this attribute, then the system uses its as… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.17 |
| cdtPppMsChapV1Password This object specifies the password used to construct a
Microsoft CHAP (v1) response on a target PPP connection.
This column is valid only if the 'msChapV1Password' … | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.18 |
| cdtPppMsChapV2Opts This object specifies how the system processes version 2 of
Microsoft CHAP on a target PPP connection:
'refuse'
This option specifies that the system sh… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.19 |
| cdtPppAccounting This object specifies whether the system applies accounting
services to the target PPP connection.
This column is valid only if the 'accounting' bit of the
correspo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.784.1.3.1.1.2 |
| cdtPppMsChapV2Hostname This object specifies the hostname sent in a Microsoft CHAP
(v2) response on a target PPP connection. If the template does
not include this attribute, then the system uses its as… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.20 |
| cdtPppMsChapV2Password This object specifies the password used to construct a
Microsoft CHAP (v2) response on a target PPP connection.
This column is valid only if the 'msChapV2Password' … | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.21 |
| cdtPppPapOpts This object specifies how the system processes the PAP on a
target PPP connection:
'refuse'
This option specifies that the system should refuse PAP
… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.22 |
| cdtPppPapUsername This object specifies the username sent in a PAP response on
a target PPP connection.
This column is valid only if the 'papUsername' bit of the
corresponding instan… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.23 |
| cdtPppPapPassword This object specifies the username used to construct a PAP
response on a target PPP connection.
This column is valid only if the 'papPassword' bit of the
correspond… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.24 |
| cdtPppEapIdentity This object specifies the identity sent in an EAP response on
a target PPP connection.
This column is valid only if the 'eapIdentity' bit of the
corresponding insta… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.26 |
| cdtPppEapPassword This object specifies the password used to construct an EAP
response on a target PPP connection.
This column is valid only if the 'eapPassword' bit of the
correspon… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.27 |
| cdtPppIpcpAddrOption This object specifies the IPCP address option for a target PPP
connection:
'other'
The implementation of this MIB module does not recognize
the … | column | Enumeration | .1.3.6.1.4.1.9.9.784.1.3.1.1.28 |
| cdtPppIpcpDnsOption This object specifies the IPCP DNS option for the dynamic
interface:
'other'
The implementation of this MIB module does not recognize
the config… | column | Enumeration | .1.3.6.1.4.1.9.9.784.1.3.1.1.29 |
| cdtPppAuthentication This object specifies authentication services applied to a
target PPP connection and other options affecting authentication
services:
'chap'
This option… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.3 |
| cdtPppIpcpDnsPrimary This object specifies the IP address of the primary DNS server
offered to the peer of a target PPP connection.
This column is valid only if the 'ipcpDnsPrimary' bit… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.9.9.784.1.3.1.1.30 |
| cdtPppIpcpDnsSecondary This object specifies the IP address of the secondary DNS
server offered to the peer of a target PPP connection.
This column is valid only if the 'ipcpDnsSecondary'… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.9.9.784.1.3.1.1.31 |
| cdtPppIpcpWinsOption This object specifies the IPCP WINS option for a target PPP
connection:
'other'
The implementation of this MIB module does not recognize
the con… | column | Enumeration | .1.3.6.1.4.1.9.9.784.1.3.1.1.32 |
| cdtPppIpcpWinsPrimary This object specifies the IP address of the primary WINS server
offered to the peer of a target PPP connection.
This column is valid only if the 'ipcpWinsPrimary' b… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.9.9.784.1.3.1.1.33 |
| cdtPppIpcpWinsSecondary This object specifies the IP address of the secondary WINS
server offered to the peer of a target PPP connection.
This column is valid only if the 'ipcpWinsSecondar… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.9.9.784.1.3.1.1.34 |
| cdtPppIpcpMaskOption This object specifies the IPCP IP subnet mask option for a
target PPP connection:
'other'
The implementation of this MIB module does not recognize
… | column | Enumeration | .1.3.6.1.4.1.9.9.784.1.3.1.1.35 |
| cdtPppIpcpMask This object specifies the IP address mask offered to the peer
of a target PPP connection.
This column is valid only if the 'ipcpMask' bit of the
corresponding insta… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.9.9.784.1.3.1.1.36 |
| cdtPppPeerDefIpAddrOpts This object specifies options that affect how the system
assigns an IP address to the peer of a target PPP connection:
'ipAddrForced'
This option forces… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.37 |
| cdtPppPeerDefIpAddrSrc This object specifies how the system assigns an IP address to
the peer of a target PPP connection:
'static'
The system assigns the IP address specified … | column | Enumeration | .1.3.6.1.4.1.9.9.784.1.3.1.1.38 |
| cdtPppPeerDefIpAddr This object specifies the IP address the system assigns to the
peer of a target PPP connection.
This column is valid only if the 'peerDefIpAddr' bit of the
correspo… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.9.9.784.1.3.1.1.39 |
| cdtPppAuthenticationMethods This object specifies the name of a list of authentication
methods used on a target PPP connection. If the template does
not include this attribute, then the system uses the defa… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.4 |
| cdtPppAuthorization This object specifies whether the system applies authorization
services to a target PPP connection.
This column is valid only if the 'authorization' bit of the
corr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.784.1.3.1.1.5 |
| cdtPppLoopbackIgnore This object specifies whether the system ignores loopback on
a target PPP connection. When the system ignores loopback,
loopback detection is disabled.
This column… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.784.1.3.1.1.6 |
| cdtPppMaxBadAuth This object specifies the number of authentication failures
allowed by the system before a target PPP connection is reset.
The value '0' cannot be written to an ins… | column | Unsigned32 | .1.3.6.1.4.1.9.9.784.1.3.1.1.7 |
| cdtPppMaxConfigure This object specifies the number of unacknowledged
Configure-Request messages a target PPP connection can send
before the system abandons LCP or NCP negotiations.
T… | column | Unsigned32 | .1.3.6.1.4.1.9.9.784.1.3.1.1.8 |
| cdtPppMaxFailure This object specifies the number of Configure-Nak messages a
target PPP connection can receive before the system abandons LCP
or NCP negotiations.
This column is va… | column | Unsigned32 | .1.3.6.1.4.1.9.9.784.1.3.1.1.9 |