cdtPppChapOpts
CISCO-DYNAMIC-TEMPLATE-MIB ·
.1.3.6.1.4.1.9.9.784.1.3.1.1.13
Object
column
r/w
Bits
This object specifies how the system processes the CHAP on a
target PPP connection:
'refuse'
This option specifies that the system should refuse CHAP
requests from peers of a target PPP connection.
'callin'
This option specifies that the system should only refuse
CHAP requests for incoming calls on a target PPP
connection. This option is only relevant if the
'refuse' option is set to '1'.
'wait'
This option delays CHAP authentication until after the
peer of a target PPP connection has authenticated itself
to the system.
'encrypted'
This option specifies that the value specified by the
corresponding instance of cdtPppChapPassword is already
encrypted.
This column is valid only if the 'chapOpts' bit of the
corresponding instance of cdtPppValid is '1'.
Context
- MIB
- CISCO-DYNAMIC-TEMPLATE-MIB
- OID
.1.3.6.1.4.1.9.9.784.1.3.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cdtPppTemplateEntry
- Table
- cdtPppTemplateTable
- Siblings
- 38
Syntax
Bits
Values & Constraints
Enumerated Values
0 | refuse |
1 | callin |
2 | wait |
3 | encrypted |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cdtPppValid This object specifies which attributes in the dynamic template
have been configured to valid values.
Each bit in this bit string corresponds to a column in this
tab… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.1 |
| cdtPppMaxTerminate This object specifies the number of unacknowledged
Terminate-Request messages a target PPP connection can send
before the system abandons LCP or NCP negotiations.
T… | column | Unsigned32 | .1.3.6.1.4.1.9.9.784.1.3.1.1.10 |
| cdtPppTimeoutAuthentication This objects specifies the maximum time the system will wait
for a response to an authentication request on a target PPP
connection.
This column is valid only if th… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.784.1.3.1.1.11 |
| cdtPppTimeoutRetry This objects specifies the maximum time the system will wait
for a response to a PPP control packets on a target PPP
connection.
This column is valid only if the 't… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.784.1.3.1.1.12 |
| cdtPppChapHostname This object specifies the hostname sent in a CHAP response
on a target PPP connection. If the template does not include
this attribute, then the system uses its assigned hostname… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.14 |
| cdtPppChapPassword This object specifies the password used to construct a CHAP
response on the target PPP connection.
This column is valid only if the 'chapPassword' bit of the
corres… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.15 |
| cdtPppMsChapV1Opts This object specifies how the system processes version 1 of
Microsoft CHAP on a target PPP connection:
'refuse'
This option specifies that the system sh… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.16 |
| cdtPppMsChapV1Hostname This object specifies the hostname sent in a Microsoft CHAP
(v1) response on a target PPP connection. If the template does
not include this attribute, then the system uses its as… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.17 |
| cdtPppMsChapV1Password This object specifies the password used to construct a
Microsoft CHAP (v1) response on a target PPP connection.
This column is valid only if the 'msChapV1Password' … | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.18 |
| cdtPppMsChapV2Opts This object specifies how the system processes version 2 of
Microsoft CHAP on a target PPP connection:
'refuse'
This option specifies that the system sh… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.19 |
| cdtPppAccounting This object specifies whether the system applies accounting
services to the target PPP connection.
This column is valid only if the 'accounting' bit of the
correspo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.784.1.3.1.1.2 |
| cdtPppMsChapV2Hostname This object specifies the hostname sent in a Microsoft CHAP
(v2) response on a target PPP connection. If the template does
not include this attribute, then the system uses its as… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.20 |
| cdtPppMsChapV2Password This object specifies the password used to construct a
Microsoft CHAP (v2) response on a target PPP connection.
This column is valid only if the 'msChapV2Password' … | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.21 |
| cdtPppPapOpts This object specifies how the system processes the PAP on a
target PPP connection:
'refuse'
This option specifies that the system should refuse PAP
… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.22 |
| cdtPppPapUsername This object specifies the username sent in a PAP response on
a target PPP connection.
This column is valid only if the 'papUsername' bit of the
corresponding instan… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.23 |
| cdtPppPapPassword This object specifies the username used to construct a PAP
response on a target PPP connection.
This column is valid only if the 'papPassword' bit of the
correspond… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.24 |
| cdtPppEapOpts This object specifies how the system processes the EAP on a
target PPP connection:
'refuse'
This option specifies that the system should refuse EAP
… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.25 |
| cdtPppEapIdentity This object specifies the identity sent in an EAP response on
a target PPP connection.
This column is valid only if the 'eapIdentity' bit of the
corresponding insta… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.26 |
| cdtPppEapPassword This object specifies the password used to construct an EAP
response on a target PPP connection.
This column is valid only if the 'eapPassword' bit of the
correspon… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.27 |
| cdtPppIpcpAddrOption This object specifies the IPCP address option for a target PPP
connection:
'other'
The implementation of this MIB module does not recognize
the … | column | Enumeration | .1.3.6.1.4.1.9.9.784.1.3.1.1.28 |
| cdtPppIpcpDnsOption This object specifies the IPCP DNS option for the dynamic
interface:
'other'
The implementation of this MIB module does not recognize
the config… | column | Enumeration | .1.3.6.1.4.1.9.9.784.1.3.1.1.29 |
| cdtPppAuthentication This object specifies authentication services applied to a
target PPP connection and other options affecting authentication
services:
'chap'
This option… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.3 |
| cdtPppIpcpDnsPrimary This object specifies the IP address of the primary DNS server
offered to the peer of a target PPP connection.
This column is valid only if the 'ipcpDnsPrimary' bit… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.9.9.784.1.3.1.1.30 |
| cdtPppIpcpDnsSecondary This object specifies the IP address of the secondary DNS
server offered to the peer of a target PPP connection.
This column is valid only if the 'ipcpDnsSecondary'… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.9.9.784.1.3.1.1.31 |
| cdtPppIpcpWinsOption This object specifies the IPCP WINS option for a target PPP
connection:
'other'
The implementation of this MIB module does not recognize
the con… | column | Enumeration | .1.3.6.1.4.1.9.9.784.1.3.1.1.32 |
| cdtPppIpcpWinsPrimary This object specifies the IP address of the primary WINS server
offered to the peer of a target PPP connection.
This column is valid only if the 'ipcpWinsPrimary' b… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.9.9.784.1.3.1.1.33 |
| cdtPppIpcpWinsSecondary This object specifies the IP address of the secondary WINS
server offered to the peer of a target PPP connection.
This column is valid only if the 'ipcpWinsSecondar… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.9.9.784.1.3.1.1.34 |
| cdtPppIpcpMaskOption This object specifies the IPCP IP subnet mask option for a
target PPP connection:
'other'
The implementation of this MIB module does not recognize
… | column | Enumeration | .1.3.6.1.4.1.9.9.784.1.3.1.1.35 |
| cdtPppIpcpMask This object specifies the IP address mask offered to the peer
of a target PPP connection.
This column is valid only if the 'ipcpMask' bit of the
corresponding insta… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.9.9.784.1.3.1.1.36 |
| cdtPppPeerDefIpAddrOpts This object specifies options that affect how the system
assigns an IP address to the peer of a target PPP connection:
'ipAddrForced'
This option forces… | column | Bits | .1.3.6.1.4.1.9.9.784.1.3.1.1.37 |
| cdtPppPeerDefIpAddrSrc This object specifies how the system assigns an IP address to
the peer of a target PPP connection:
'static'
The system assigns the IP address specified … | column | Enumeration | .1.3.6.1.4.1.9.9.784.1.3.1.1.38 |
| cdtPppPeerDefIpAddr This object specifies the IP address the system assigns to the
peer of a target PPP connection.
This column is valid only if the 'peerDefIpAddr' bit of the
correspo… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.9.9.784.1.3.1.1.39 |
| cdtPppAuthenticationMethods This object specifies the name of a list of authentication
methods used on a target PPP connection. If the template does
not include this attribute, then the system uses the defa… | column | OctetString | .1.3.6.1.4.1.9.9.784.1.3.1.1.4 |
| cdtPppAuthorization This object specifies whether the system applies authorization
services to a target PPP connection.
This column is valid only if the 'authorization' bit of the
corr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.784.1.3.1.1.5 |
| cdtPppLoopbackIgnore This object specifies whether the system ignores loopback on
a target PPP connection. When the system ignores loopback,
loopback detection is disabled.
This column… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.784.1.3.1.1.6 |
| cdtPppMaxBadAuth This object specifies the number of authentication failures
allowed by the system before a target PPP connection is reset.
The value '0' cannot be written to an ins… | column | Unsigned32 | .1.3.6.1.4.1.9.9.784.1.3.1.1.7 |
| cdtPppMaxConfigure This object specifies the number of unacknowledged
Configure-Request messages a target PPP connection can send
before the system abandons LCP or NCP negotiations.
T… | column | Unsigned32 | .1.3.6.1.4.1.9.9.784.1.3.1.1.8 |
| cdtPppMaxFailure This object specifies the number of Configure-Nak messages a
target PPP connection can receive before the system abandons LCP
or NCP negotiations.
This column is va… | column | Unsigned32 | .1.3.6.1.4.1.9.9.784.1.3.1.1.9 |