cdspLastAlarmCause – CISCO-DSP-MGMT-MIB

Object

column Enumeration

The object indicates the current or last alarm state of
DSP.
other            - none of the following
noAlarm          - alarm condition had not been detected
dspFatalError    - DSP fatal error 
dspMemoryError   - DSP memory error is detected
dspBufferError   - DSP buffer error
dspDownloadError - Failed to download software to DSP. 
The cdspOperState will be set to 'shutdown(2) if the
alarm condition of DSP is persistent.

Context

MIB: CISCO-DSP-MGMT-MIB
OID: .1.3.6.1.4.1.9.9.86.1.2.1.1.3
Type: column
Access: readonly
Status: current
Parent: cdspStatusEntry
Table: cdspStatusTable
Siblings: 10

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	other
`2`	noAlarm
`3`	dspFatalError
`4`	dspMemoryError
`5`	dspBufferError
`6`	dspDownloadError

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cdspOperState The current operational state of the DSP. normal - DSP operates normally shutdown - DSP is shutdown due to fatal error congested - DSP does not accept call because …	column	Enumeration	`.1.3.6.1.4.1.9.9.86.1.2.1.1.1`
cdspNumCongestionOccurrence The number of congestion occurred on the DSP. This value is set to 0 when system is reset.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.86.1.2.1.1.10`
cdspDspNum This object identifies the DSP number associated with this DSP entity.	column	Unsigned32	`.1.3.6.1.4.1.9.9.86.1.2.1.1.11`
cdspAlarms The object indicates the accumulated number of DSP Alarms.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.86.1.2.1.1.2`
cdspLastAlarmCauseText The object indicates the failure reason for the current or last DSP Alarm. It should be used only for direct, human-readable display and only if a management station is unable to…	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.9.9.86.1.2.1.1.4`
cdspLastAlarmTime The value of sysUpTime when the last DSP Alarm occurred. The value of this object is 0 if the value of cdspLastAlarmCause object is 'noAlarm'.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.9.86.1.2.1.1.5`
cdspTotalChannels The total number of channels in the DSP. This value is predetermined by the DSP functionality upon initialization. The value of 0 in this object indicates Channelized DSP mode is…	column	channels SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.86.1.2.1.1.6`
cdspInUseChannels The number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after the DSP channel is fr…	column	channels SNMPv2-SMIGauge32	`.1.3.6.1.4.1.9.9.86.1.2.1.1.7`
cdspActiveChannels The number of channels that are used by active calls to process media stream. The value is incremented after the reserved DSP channel enters call connection state and is decrement…	column	channels SNMPv2-SMIGauge32	`.1.3.6.1.4.1.9.9.86.1.2.1.1.8`
cdspSigBearerChannelSplit This object indicates if the DSP channels are splitted for signaling call and bearer call. If the value of this object is 'true' which means that signaling call and bearer call ca…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.86.1.2.1.1.9`