cdspActiveChannels
CISCO-DSP-MGMT-MIB ·
.1.3.6.1.4.1.9.9.86.1.2.1.1.8
Object
The number of channels that are used by active calls to process media stream. The value is incremented after the reserved DSP channel enters call connection state and is decremented after the call is disconnected.
Context
- MIB
- CISCO-DSP-MGMT-MIB
- OID
.1.3.6.1.4.1.9.9.86.1.2.1.1.8- Type
- column
- Access
- readonly
- Status
- current
- Units
- channels
- Parent
- cdspStatusEntry
- Table
- cdspStatusTable
- Siblings
- 10
Syntax
channels SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cdspOperState The current operational state of the DSP.
normal - DSP operates normally
shutdown - DSP is shutdown due to fatal error
congested - DSP does not accept call because
… | column | Enumeration | .1.3.6.1.4.1.9.9.86.1.2.1.1.1 |
| cdspNumCongestionOccurrence The number of congestion occurred on the DSP.
This value is set to 0 when system is reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.86.1.2.1.1.10 |
| cdspDspNum This object identifies the DSP number associated with
this DSP entity. | column | Unsigned32 | .1.3.6.1.4.1.9.9.86.1.2.1.1.11 |
| cdspAlarms The object indicates the accumulated number of DSP
Alarms. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.86.1.2.1.1.2 |
| cdspLastAlarmCause The object indicates the current or last alarm state of
DSP.
other - none of the following
noAlarm - alarm condition had not been detected
dspFatalError - D… | column | Enumeration | .1.3.6.1.4.1.9.9.86.1.2.1.1.3 |
| cdspLastAlarmCauseText The object indicates the failure reason for the current
or last DSP Alarm.
It should be used only for direct, human-readable display
and only if a management station is unable to… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.86.1.2.1.1.4 |
| cdspLastAlarmTime The value of sysUpTime when the last DSP Alarm
occurred. The value of this object is 0 if the value of
cdspLastAlarmCause object is 'noAlarm'. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.86.1.2.1.1.5 |
| cdspTotalChannels The total number of channels in the DSP. This value is
predetermined by the DSP functionality upon initialization.
The value of 0 in this object indicates Channelized DSP
mode is… | column | channels SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.86.1.2.1.1.6 |
| cdspInUseChannels The number of channels that are reserved for
serving calls. The value is incremented when the
DSP channel is reserved for call setup and
is decremented after the DSP channel is fr… | column | channels SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.86.1.2.1.1.7 |
| cdspSigBearerChannelSplit This object indicates if the DSP channels are splitted
for signaling call and bearer call.
If the value of this object is 'true' which
means that signaling call and bearer call ca… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.86.1.2.1.1.9 |